# Atmospheric liquid water content

The liquid water content (LWC) of the atmosphere is the measure of the mass of the water in a cloud, typically in g/m3 or g/kg. (Bohren, 1998). This variable is important in figuring out which types of clouds are likely to form and is strongly linked to two variables: the cloud droplet concentration, and the droplet size distribution. (Wallace, 2006). Being able to determine the cloud formations that are likely to occur is extremely useful for weather forecasting as cumulonimbus clouds are related to thunderstorms and heavy rain whereas cirrus clouds are not directly associated with precipitation.

Characteristics

The liquid water content of a cloud varies significantly depending on the type of clouds present in the atmosphere at a given location. The classification of the cloud is highly related to the liquid water content as well as the origin of the cloud. The combination of these two allows a forecaster to more readily predict the types of conditions that will be in an area based on the types of clouds that are forming or have already formed.

Relation to classification of clouds

Clouds that have low densities, such as cirrus clouds, contain very little water, thus resulting in relatively low liquid water content values of around .03g/m3. Clouds that have high densities, like cumulonimbus clouds, have much higher liquid water content values that are around 1-3g/m3, as more liquid is present in the same amount of space. Below is a chart giving typical LWC values of various cloud types. (Thompson, 2007).

Maritime vs. continental

Maritime clouds tend to have fewer water droplets than continental clouds. The majority of maritime clouds have droplet concentrations between 100 drops/cm3 and about 200 drops/cm3. (Wallace, 2006). Continental clouds have much higher droplet concentrations ranging up to around 900 drops/cm3. (Wallace, 2006). However, the droplet radius in maritime clouds tend to be larger, so that the end result is that the LWC is relatively similar in both types of air masses for the same types of clouds. (Linacre, 1998).

Measuring techniques

There are several ways that can be used to measure the liquid water content of clouds.

One way involves an electrically heated wire. The wire is attached to the power supply and is situated on the outside of the airplane. As it moves through a cloud, water droplets hit the wire and evaporate, reducing the temperature of the wire. The resistance caused by this is measured and is used to determine the power needed to maintain the temperature. The power can be converted to a value for the LWC. (Wallace, 2006).

Another way involves an instrument that uses scattered light from a large number of drops. This value is then converted to a value for the LWC. (Wallace, 2006).

A cloud chamber can also be used to simulate adiabatic ascent in the atmosphere through the decrease of pressure by removing air inside the chamber. A series of equations shown in the section below show how the LWC is obtained in this procedure. (Thompson, 2007).

Equations/relations

Various equations are useful in determining LWC and the effects that influence it. One of the most significant variables related to the LWC is the droplet concentration of a cloud.

Cloud droplet concentration

The droplet concentration of a cloud is the number of water droplets in a volume of water, typically a cubic centimeter. (Wallace, 2006). The formula for the droplet concentration is as follows.

: $n = N/V$

In this equation, N is the total number of water droplets in the volume, and V is the total volume of the cloud being measured. Converting this to a LWC gives an equation that is shown below.

:$LWC = \left(m_w * n\right) / N$

In this equation, mw is the mass of the water in the air parcel.

Cloud chamber

A common type of experiment is one that involves a cloud chamber that is de-pressurized to simulate adiabatic ascent of air parcels. Determining LWC is a simple calculation shown below. (Thompson, 2007).

:$LWC = m_w / V_c$

Mw is the mass of the water in the cloud chamber and Vc is the volume of the cloud chamber. Obtaining the mass of the liquid water in the cloud chamber is possible through an equation involving the latent heat of condensation. (Thompson 2007).

:$m_w = frac\left\{-m_a cdot c_p cdot Delta T_a\right\}\left\{L_c\left(T\right)\right\}$

In the equation above, Lc(T) is the latent heat of condensation of water at temperature T, ma is the mass of the air in the cloud chamber, cp is the specific heat of dry air at constant pressure and $Delta T_a$ is the change in the temperature of the air due to latent heat.

References

*cite book|last=Wallace|first=John M.|coauthor=Hobbs, Peter V.|title=Atmospheric Science: An Introductory Survey|publisher= U.K. Elsevier Inc.|edition=2nd|date=2006|id=ISBN 012732951X
*cite book|last=Bohren|first=Craig F.|coauthor=Albrecht, Bruce A.|title=Atmospheric Thermodynamics|publisher=Oxford University Press|edition=1st|date=1998|id=ISBN 0195099044
*citation|last1=Linacre|first1=E.|last2=Geerts|first2=B.|title=Cloud liquid water content, drop sizes, and number of droplets.|date=1999-08|url=http://www-das.uwyo.edu/~geerts/cws/notes/chap08/moist_cloud.html|accessdate=2008-03-12
*cite paper|first=Anne|last=Thompson|title=Simulating the Adiabatic Ascent of Atmospheric Air Parcels using the Cloud Chamber|publisher=Department of Meteorology, Penn State|date=2007

Wikimedia Foundation. 2010.

### Look at other dictionaries:

• Water content — Soil composition by phase: s soil (dry), v void (pores filled with water or air), w water, a air. V is volume, M is mass. Water content or moisture content is the quantity of water contained in a material, such as soil (called soil moisture),… …   Wikipedia

• Atmospheric sounding — An atmospheric sounding is a measurement of vertical distribution of physical properties of the atmospheric column such as pressure, temperature, wind speed and wind direction (thus deriving wind shear), liquid water content, ozone concentration …   Wikipedia

• Water absorption — is a phenomenon in the transmission of electromagnetic radiation through a medium containing water molecules. Water molecules are excited by radiation at certain wavelengths and tend to selectively absorb portions of the spectrum while allowing… …   Wikipedia

• Water resources — A natural wetland Water resources are sources of water that are useful or potentially useful. Uses of water include agricultural, industrial …   Wikipedia

• Liquid breathing — Intervention MeSH D021061 Liquid breathing is a form of respiration in which a normally air breathing organism breathes an oxygen rich liquid (such as a perfluorocarb …   Wikipedia

• Liquid hydrogen — (LH2 or LH2) is the liquid state of the element hydrogen. It is a common liquid rocket fuel for rocket applications. Hydrogen is found naturally in the molecular H2 form.To exist as a liquid, H2 must be pressurized and cooled to a very low… …   Wikipedia

• liquid — liquidly, adv. liquidness, n. /lik wid/, adj. 1. composed of molecules that move freely among themselves but do not tend to separate like those of gases; neither gaseous nor solid. 2. of, pertaining to, or consisting of liquids: a liquid diet. 3 …   Universalium

• Water purification — This article is about large scale, municipal water purification. For portable/emergency water purification, see portable water purification. For industrial water purification, see deionized water. For distilled water, see distilled water. Water… …   Wikipedia

• Origin of water on Earth — Water covers about 70% of the Earth s surface The question of the origin of water on Earth, or the question of why there is clearly more water on the Earth than on the other planets of the Solar System, has not been clarified. There are several… …   Wikipedia

• Properties of water — H2O and HOH redirect here. For other uses, see H2O (disambiguation) and HOH (disambiguation). This article is about the physical and chemical properties of pure water. For general discussion and its distribution and importance in life, see Water …   Wikipedia