caption= Tippmann A-5 Basic with aftermarket 12" ceramic barrel by J&J and BSA 30mm red dot sight.
action= Semi-Automatic, Fully Automatic with E-Grip
bore= .68 in (17.272 mm)
barrel= 8.5 in (216 mm) ported barrel
rof= 17+ balls per second
The A-5 is a semi-automatic pneumatic marker made by
Tippmannfor playing paintball. It was first produced in 2002 in the USA. It utilizes a loading concept called the "Cyclone Feed System." This enables the marker to have a high rate of fire without the addition of aftermarket loaders. It is known to be tough, rugged, affordable, low maintenance, and extensively modifiable.
The Tippmann A-5 is available in matte-black, silver nickel and camouflage finishes and is modeled after the
Heckler & Koch MP5Kin appearance. It is extremely popular in MilSimscenario games due to the multitude of aftermarket parts which can make it resemble many real-world firearms. With modifications, it can be configured to appear similar to other weapons such as:
*M82 Sniper Rifle
Heckler & Koch UMP
The standard A-5 is a semi-automatic, open bolt blow-back operated, sear-trigger paintball marker. Its inline blowback gas system can utilize both CO2 and HPA propellants. Standard marker includes single-finger trigger, 8.5 in (216 mm) ported barrel, front and rear sights, tournament-legal velocity adjuster, opaque black 200-round wide-mouth hopper and Cyclone-Feed System.
*Action: Semi-automatic, Fully Automatic (A-5 with E-Grip only)
*Power: CO2, compressed air, nitrogen
*Feed rate: 15bps (up to 30 bps with certain Cyclone upgrades)
*Firing rate: 1-15bps (Tippmann E-Grip ROF 8-30bps Auto)
*Barrel length: 8.5 inches
*Length: 20 inches(with stock barrel on)
*Weight: 3.5 lbs. (without tank)
*Effective Range: 150+ ft
Tippmann A-5s use a special paintball feed mechanism called the Cyclone-Feed System. It is similar to electric loaders in that it attempts to increase the rate at which the paintball marker can feed balls into the chamber.
Whereas most markers have a feed tube attached to a hopper/loader that either drops paintballs one-by-one or force-feeds (in the case of some loaders) into the chamber, the Cyclone-Feed System is a housing on the right side of the marker. Contained within the housing are two star-shaped sprockets. Paintballs fall from a wide mouth hopper into the gaps between the spokes. As the operator fires, some gas from the firing cycle is routed to a cylinder, which holds a piston. Gas pressure pushes the piston forward, also compressing a spring which will return the piston when the gas pressure in the cylinder drops; at far end of its travel, the piston is connected to a ratchet which interacts with a toothed gear, the advancement of which on the piston's "return" stroke [important because it regulates the force with which the paintballs are struck by the spokes] rotates the position of the spokes counterclockwise and feeds a paintball into the chamber. This effectively means that the rate at which paintballs are being fed into the marker is dependent on the rate at which the operator pulls the trigger. Users have reported speeds in excess of 25 bps, but this requires mechanical modification to the stock cyclone parts. It is advertised at 15+ bps.
The A-5 is one of the most modifiable paintball markers in existence. Some products are performance upgrades, while others are purely aesthetic. Kits available at many stores and websites can allow the A-5 to resemble many real-world firearms "(see Appearance)"
Some of the many upgrades include:
*Compressed Air Low-Pressure Kits
*Hoppers (due to the unique Cyclone-Feed System, very few hoppers [the stock hopper, Ricochet hopper, TAC-Cap loader, X-7 Marker Hopper, and a 240 round ammo box version] are available); Q-Loader also manufactures a Q-Loader System for the A-5, although it typically requires the right receiver to be milled, unless a custom-manufactured attachment bracket is used.
The upgrades available from Tippmann specifically for the A-5 include the CAR Stock, Response Trigger, E-Grip, Low-Pressure Kit, Expansion Chamber, Universal Mount, 98 to A-5 Barrel Adapter, Remote Line, Sniper Barrel (12", 14", 16" lengths), Camouflage Graphics Kit, Longbow Stock (with or without air-thru), Dogleg Stock (with or without air-thru), Double Trigger Kit and Flatline Barrel System.
Flatline Barrel System
The Flatline barrel is a curved paintball barrel. The slight "S"-shaped curvature, in addition to a roughly honed surface at select points in the barrel, creates backspin on the ball which increases its range by 100 feet over a standard barrel. Some players feel that it is not quite as accurate as many other paintball barrels, because each paintball is spun differently. Another disadvantage some players claim is its tendency to break paintballs more easily. This can be remedied with higher quality paint, however. The Flatline is also quite loud, due to lack of porting.
Unfortunately, Flatline Barrels are sometimes considered difficult to remove and clean, though it has been said that the A5 is much easier over the version used by the Tippmann 98 Custom. On the 98 Custom model, they do not screw into the adapter on the muzzle of the marker; three bolts must be loosened before the barrel can be removed.
The Flatline is often favored by players who like to play farther back roles, especially those providing suppressive fire as the range gives them an advantage.
The E-Grip is an aftermarket pistol grip and trigger for the A-5, though the model A-5 with E-Grip can be bought directly from Tippmann. There are two types of electronic triggers now available
There is the older and significantly harder to find Tippmann produced E-Grip. It features five different fire selections which include:
*3-Round Burst Fire
The maximum firing rate of the E-Grip is 17 balls-per-second. Firing modes are very easily selected by means of a screw which is rotated to toggle modes. Maximum rate of fire can also be changed via another screw on the grip frame.
There is also the newer E-Grip produced by Wicked Air Sports (W.A.S). This is what is commonly sold now by Tippmann in their E-Grip package. This trigger will also be installed an all A-5 markers ordered with the E-Grip installed. Firing modes on the W.A.S. trigger are:
*Three Shot Ramping
*Three Shot Full Auto
The "Three" in the "Three Shot Ramping" and "Three Shot Full Auto" programming modes refers to the trigger needing to be pulled three times before the Full Auto or Ramping are activated. The first three shots in this will be Semi Automatic. This makes the trigger legal for certain competitions.
Programming the W.A.S. trigger is more difficult. There is a menu system that is controlled by the pressing both trigger and a small button on the front of the grip that can only be pressed with a tool. There is a small three color LED that outputs data by different patterns of blinking and LED color.
The trigger can be programmed more deeply than the older Tippmann E-Grip. Maximum firing rate is 30 balls-per-second but is usually programmed much lower. Dwell and Debounce is also programmable.
The W.A.S. board is also used in the Tippmann 98 line of paintball markers. However the polarity of the microswitch is reversed. Polarity can be changed by referring to the owners manual. The same board can be used in both markers.
Response Trigger System
The Response Trigger System is a firing system available for the A-5. The system uses a series of parts that are added to the marker to greatly increases firing rate for the marker. The system uses excess carbon dioxide or compressed air from the firing process to reset the trigger and sear with a pneumatic cylinder. The system can reset the trigger with only moderate pressure on the trigger. When this happens, the pressure of the finger can immediately pull the trigger back, creating "bounce", and firing again. This effectively gives the shooter the ability to fire at fully-automatic speeds. As such, it has been banned at some commercial paintball fields.
Continuing the Tippmann tradition, the A-5 is very durable and features a solid cast-aluminum receiver with a high-impact shock absorbing endcap. The A-5 can take much abuse as all parts are tough and industrially designed. The exceptions to this are the Cyclone-Feed System and the Response Trigger Kit, which both have lines that snake along the receiver and can be snagged easily.
The grip/trigger assembly, back plate and bottom-line hose (or direct Air Source Adapter) are held to the receiver by four push-pins that can be easily removed to allow easy field stripping. "(see Field-Stripping)"
Unlike previous Tippmann markers, the A-5 is very easy to field-strip and clean. This is done by removing four push-pins which hold the tombstone, endcap and grip frame in place.
To field strip an A-5 marker:
*Depressurize the marker by partially unscrewing the propellant supply and firing dry to rid marker of any latent gas.
*Remove barrel from marker.
*Remove four push-pins (#1, #2, #3, and #4). Use pliers and lubricate with paintball marker oil if pins are difficult to remove.
*Depress tombstone latch and pull tombstone to remove it from marker. Remove endcap and grip frame; make sure the velocity screw is screwed in past the aluminum housing, now the valve and bolt assembly will easily slide out the back of the marker.
*Clean chamber and bolt assembly.
*Lubricate o-rings with a few drops of paintball marker oil.
*Reassemble marker and replace push-pins.
The Tippmann A-5 uses an inline blowback system.
Before gassing, cock the marker by pulling back the cocking handle (located near the front of the marker on the left side of the receiver). This pulls back the front and rear bolts and allows access to chamber while also ensuring that the valve is not being depressed by the rear bolt when the propellant supply is screwed in, which would result in a leak. A click should be heard. Release the cocking handle.
Screw a propellant supply (CO2, N2 or HPA) tank onto receiver or remote coil. Operator should hear a sound as marker becomes pressurised.
Hopper and Loading
Press the manual-feed button (located to the right of the receiver, on the Cyclone-Feed System) and check Cyclone-Feed System for proper rotation of sprockets. It should be clean and free of debris.
Attach a compatible hopper to the marker by placing the mouth-end (male) of the hopper into the Cyclone-Feed housing (female) and turning hopper until tab on mouth locks into corresponding hole in feeder housing. Hopper should be parallel with marker.
Open hopper flap and fill with paintballs (up to 200 for standard hopper). Close flap until it snaps onto hopper mouth.
Preparing to Fire
Press the manual-feed button to force a paintball into the chamber. Pull back on the cocking handle located on the opposite side of the marker from the cyclone feeder (this is only required once each time a propellant bottle is connected).
Disengage safety by pressing the 'Push Fire' button located above the trigger on the right side of the grip frame. A red line on the left side of the button indicates when marker is ready to fire.
* [http://tippmann.com/product_guide/markerDetails.aspx?categoryid=1 Tippmann Pneumatics: A-5]
* [http://paintball.about.com/od/gunreviews/gr/tippmanna5.htm A-5 Review: www.about.com]
* [http://www.pntball.com Tippmann A-5]
* [http://www.paintballer.ie/images/cyclone.gifThe cyclone feed in action]
* [http://www.youtube.com/watch?v=tWGn3NXxytQ Youtube Video of Cyclone in Action]
* [http://www.a5og.net Tippmann A5 Operator Group]
Wikimedia Foundation. 2010.
Look at other dictionaries:
Tippmann — Sports LLC Type LLC Industry Paintball Pneumatic Sewing Machines Industrial Founded Fort … Wikipedia
Tippmann C-3 — paintball marker caption=The Tippmann C 3 marker type=Electronic action=Pump Action barrel=13 inches rof= 4 balls per second price=$229|At the time of its introduction, the Tippmann C 3 was the first propane powered paintball marker. It operates… … Wikipedia
Tippmann SL-68 II — The SL 68 II is a Nelson valve based pump action paintball marker manufactured by Tippmann. Roughly, the marker was manufactured from 1990 to 1999. The marker was still available to the public through many mail order paintball stores, including… … Wikipedia
Tippmann — aus einer Erweiterung von Tibbe, einer niederdeutsch friesischen Kurzform von Namen wie Dietbald (thiot/thiad + bald), mit dem Suffix mann entstandener Familienname … Wörterbuch der deutschen familiennamen
Tippmann 98 custom — paintball marker caption=A woodsballer firing an 98C. marker type=Mechanical action=Semi Automatic bore=.68 in barrel=8.5 inches rof=Varies price=$130 USD or close to $170 USD if bought in a power pack (includes everything except paintballs and a … Wikipedia
Friedrich F. Tippmann — (5 October, 1894, Futak 5 August 1974, Vienna was a Hungarian entomologist who specialised in Coleoptera , especially the Cerambycidae.Life and workTippmann was born in 1894 in Futak in Hungary to Norbert Tippmann, a forester working for Duke… … Wikipedia
Special Ops Paintball — Infobox Company company name = Special Ops Paintball company company type = TBA foundation = North Salt Lake City, New Hampshire location = North Salt Lake, Utah, U.S. key people = Jayson Orvis Jared Orvis Rory McCarthy Brandon Fratto Travis… … Wikipedia
Paintball marker — A paintball marker, also known as a paintball gun, is the central or main piece of equipment in the sport of paintball. Markers make use of an expanding gas such as carbon dioxide, compressed air or nitrogen dioxide to propel paintballs through… … Wikipedia
Список видов усачей рода Acanthoderes — Приложение к статье Acanthoderes В род Acanthoderes включают около 150 видов из 6 подродов. Систематика род: Acanthoderes Audinet Serville, 1835 подрод … Википедия
Liste der Inline-Speedskating-Deutsche Meisterschaften — Die Inline Speedskating Deutschen Meisterschaften sind jährlich, an verschiedenen Orten ausgetragene, nationale Meisterschaften. Die deutschen Meisterschaften werden von der Inline Speedskating Abteilung des Deutschen Rollsport und Inline… … Deutsch Wikipedia