Torque tube

A torque tube system is an automobile driveshaft technology, used in cars with a front engine and rear drive. It is not as widespread as the Hotchkiss drive, but is still occasionally used to this day.

The "torque" that is referred to in the name is not that of the driveshaft, along the axis of the car, but that applied by the wheels. The design problem that the torque tube solves is how to get the traction forces generated by the wheels to the car frame. The "torque tube" transmits this force by directly coupling the axle differential to the transmission and therefore propels the car forward by pushing on the engine/transmission and then through the engine mounts to the car frame. In contrast, the Hotchkiss drive has the traction forces transmitted to the car frame by using other suspension components such as leaf springs or trailing arms. A ball and socket type of joint called a "torque ball" is used at one end of the torque tube to allow relative motion between the axle and transmission due to suspension travel. Since the torque tube does not constrain the axle in the lateral (side-to-side) direction a panhard rod is often used for this purpose. The combination of the panhard rod and the torque tube allows the easy implementation of soft coil springs in the rear to give good ride quality.

In addition to transmitting the traction forces, the torque tube is hollow and contains the rotating driveshaft. Inside the hollow torque ball is the universal joint of the driveshaft that allows relative motion between the two ends of the driveshaft. In most applications the drive shaft uses a single universal joint which has the disadvantage that it causes speed fluctuations in the driveshaft when the shaft is not straight. The Hotchkiss drive uses two universal joints which has the effect of canceling the speed fluctuations and gives a constant speed even when the shaft is no longer straight.

Examples of the torque tube were the American cars of the Ford brand up through 1948, which used the less expensive transverse springs that could not take the thrust. Buick started using coil springs in the 1930s, as did Nash's post-war Airflyte model; these also necessitated using a torque tube. American Motors (AMC) also continued to use a coil spring rear suspension design with a torque tube on their large-sized cars (Rambler Classic and Ambassador) through the 1966 model year. The 1961-1963 Pontiac Tempest incorporated an unusual curved “torque-tube” with a 4-inch drop (about 10 centimeters) that housed a 3/4 inch (2 cm) solid steel driveshaft (nicknamed the "rope shaft") without universal joints on each end. The main purpose was to make the floor lower, thus increasing the car's interior room. The Peugeot 504 and the Volvo 300 Series also used a torque tube. The torque tube driveline is also used in Sprintcars and Midget cars. The C5 and C6 Chevrolet Corvette, Lexus IS-FFact|date=June 2008, Porsche 924, Porsche 928, Porsche 944 and Aston Martin DBR9 also use variations on this design.


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • torque tube — noun Etymology: torque (II) : a tube surrounding the propeller shaft of an automotive vehicle to take the torque and being usually a unit with the rear axle housing at the rear but with a universal joint at the front where it is supported by a… …   Useful english dictionary

  • torque tube — A tube in an aircraft control system that transmits a torsional force from the operating control to the control surface. Torque tubes are often used to actuate ailerons and flaps …   Aviation dictionary

  • torque tube — A hollow forward extrusion of the rear axle casing incorporated in early live rear axle designs, both enclosing the drive shaft and providing a forward location of the driven axle, pivoting about a spherical joint either at the rear end of the… …   Dictionary of automotive terms

  • torque tube drive — The method of connecting the transmissionoutput shaft to the differentialpinion shaft by using an enclosed driveshaft. The driveshaft is enclosed in a torque tube that is bolted to the rear axle housing on one end and is pivoted through a ball… …   Dictionary of automotive terms

  • torque tube axle — A live rear axle layout with a divided drive shaft and a T shaped axle housing, the hollow forward extrusion of which carries the rear half of the divided drive shaft …   Dictionary of automotive terms

  • tube — [1] A long, narrow, hollow cylinder for holding or passing liquids or gases. [2] A rubber doughnut shaped bladder which is placed within the carcass of a tire and inflated. See axle tube bourdon tube capillary tube carburetor venturi choke tube… …   Dictionary of automotive terms

  • tube axle — See torque tube axle …   Dictionary of automotive terms

  • tube drive — See torque tube drive …   Dictionary of automotive terms

  • Tube tool — Tube tools are tools used to service any tubing (material) in industrial applications including, but not limited to: HVAC or industrial heating and air (hospitals and universities, for example), OEM s(Original equipment manufacturer), defense… …   Wikipedia

  • Bicycle Torque Coupling — An S and S Coupling also known as a Bicycle Torque Coupling or BTC is a coupling which enables bicycle frames to be separated into smaller pieces, usually to facilitate packing and transporting. They can be built into the frame by the frame… …   Wikipedia


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.