Messerschmitt KR200

Messerschmitt KR200
Messerschmitt KR200
Messerschmitt Kabinenroller KR200
Manufacturer Regensburger Stahl- u. Maschinenbau, Regensburg, Germany
Also called Kabinenroller, Karo
Production 1956-1964
approximately 40,000
Predecessor Messerschmitt KR175
Successor None
Class Microcar
Body style bubble-top coupé, convertible, or roadster; two seats in tandem.
Layout RMR layout
Platform Messerschmitt Kabinenroller
Engine Fichtel & Sachs two-stroke single cylinder, operable in both directions of crankshaft rotation
Transmission Four speeds forward or reverse (depending on engine rotation), sequential, unsynchronized.
Wheelbase 79.9 in (202.9 cm) [1]
Length 111.0 in (281.9 cm) [1]
Width 48.0 in (121.9 cm)[1]
Height 47.2 in (119.9 cm)[1]
Curb weight 506 lb (229.5 kg) (curb)[1]
Related Messerschmitt KR175
Messerschmitt KR201 (roadster)
FMR Tg500
Designer Fritz Fend

The Messerschmitt KR200, or Kabinenroller (Cabin Scooter), was a three-wheeled bubble car designed by the aircraft engineer Fritz Fend and produced in the factory of the German aircraft manufacturer Messerschmitt from 1955 to 1964.



Messerschmitt, temporarily not allowed to manufacture aircraft, had turned its resources to producing other commodities. In 1952, Fend approached Messerschmitt with the idea of manufacturing small motor vehicles.[2] These were based on his Fend Flitzer invalid carriage.[3]

The first of Fend's vehicles to enter production at Messerschmitt's Regensburg factory was the KR175.[4] The title Kabinenroller means "scooter with cabin".[5] While the Messerschmitt name and insignia were used on the car, a separate company, incorporated as Regensburger Stahl- und Metallbau GmbH, was created to manufacture and market the vehicle.[4]

The KR200 replaced the KR175 in 1955.[4] While using the same basic frame as the KR175 with changes to the bodywork (notably including wheel cutouts in the front fenders) and an improved canopy design,[6] the KR200 was otherwise an almost total redesign.[7] The rear suspension and engine mounting were reworked, and hydraulic shock absorbers were installed at all three wheels. Tire sizes were enlarged to 4.00x8.[6]

Retailing for around DM 2,500, the KR200 was considered an instant success with almost 12,000 built during its first year.[8] A maximum speed in excess of 90 km/h (56 mph)[8] despite a claimed power output of only 10 PS (7.4 kW; 9.9 hp)[8] reflected the vehicle's light weight.

In 1956, Messerschmitt was allowed to manufacture aircraft again and lost interest in Fend's microcars. Messerschmitt sold the Regenburg works to Fend, who formed Fahrzeug- und Maschinenbau GmbH, Regensburg (FMR) to continue production of the KR200 and his other vehicles.[9]

In 1957, the KR200 Kabrio model was released, featuring a cloth convertible top and fixed side window frames. This was followed by the KR201 Roadster without window frames, using a folding cloth top, a windscreen, and removable side curtains. A Sport Roadster was later offered with no top and with the canopy fixed into place so that the driver would have to climb in and out at the top of the car.[9]

Production of the KR200 was heavily reduced in 1962 and ceased in 1964[10] as sales had been dropping for a few years. The demand for basic economy transport in Germany had diminished as the German economy boomed.[11] A similar situation developed in other parts of Europe such as in the manufacturer's biggest export destination, the United Kingdom, where sales were particularly affected by the increasing popularity of the Mini.

24-hour record run

In 1955, in order to prove the KR200's durability, Messerschmitt prepared a KR200 to break the 24-hour speed record for three-wheeled vehicles under 250 cc (15.3 cu in). The record car had a special single-seat low-drag body and a highly modified engine, but the suspension, steering, and braking components were stock. Throttle, brake, and clutch cables were duplicated. The record car was run at the Hockenheimring for 24 hours and broke 22 international speed records in its class, including the 24-hour speed record, which it set at 103 km/h (64 mph)[6][12]

Messerschmitt Service Car

Messerschmitt, and subsequently FMR, made factory-converted Service Cars to order for the automobile service industry. Similar in concept to the Harley-Davidson Servi-Car and the Indian Dispatch Tow, the Service Car had a detachable tow bar and clamp, a revised front suspension to accommodate the tow bar when in use, and a storage system inside the car to accommodate the tow bar when not in use. The service technician would drive the Service Car to the customer's car and, if the customer's car was drivable, attach the tow bar to the front of the Service Car, clamp the other end of the tow bar to the bumper of the customer's car, and drive the customer's car to the garage. When the service was complete, he would drive the car back to the customer while towing the Service Car, detach the Service Car from the customer's car, and drive back to the garage. Approximately 12 were built; only one is known to exist at present.[13]


The KR200 incorporated several features unique to the KR line and its four-wheeled derivative, the FMR Tg500. Externally, the narrow body, the transparent acrylic bubble canopy and low stance were among the more obvious features.

Tandem seating

The narrow body, and corresponding low frontal area, was achieved with tandem seating, which also allowed the body to taper like an aircraft fuselage, within a practical length. 10 PS (7.4 kW; 9.9 hp) propelled the KR200 to around 105 km/h (65 mph). The consumption of the car was 87 mpg-imp (3.2 L/100 km).

The tandem seating also centralized the mass of the car along the longitudinal axis which, combined with the low center of gravity, low weight, and wheel placement at the vehicle's extremes, gave the KR200 good handling characteristics[14] A more minor advantage of tandem seating was that it made an export version to countries that drive on the left unnecessary. An "Export" model was built, but this denoted a more luxurious trim level.[6]

Bubble canopy

Messerschmitt Kabinenroller with Yılmaz Onay and Erol Keskin in Turkey. 1968

Entry to most KR models except the KR201 Sport Roadster and a corresponding Tg500 version was through a canopy door hinged on the right side of the vehicle. The door included all the windows (windshield, window frames on all but the Roadster models, folding top on Roadster and Kabrio models, and acrylic bubble on other versions) and the frame in which it was set, extending from the right side of the monocoque tub to the left. On Sport Roadster models, the canopy was fixed and there was neither a top nor any windows at all, only a tonneau cover.[9]

KR200 Kabrio; the folding top replaces the bubble in this version.

The bubble top on the KR200 was simplified over that of the KR175 by the use of a larger curved glass windshield that formed A-pillars with the side window frames. This allowed the bubble to be simpler and more compact than the KR175 bubble, and it was consequently easier and less expensive to produce. The windshield wiper, manual on the KR175, was electric on the KR200.[6]

Engine and transmission

The KR200 ran on a 191 cc (11.7 cu in) Fichtel & Sachs air-cooled single cylinder two-stroke engine positioned in front of the rear wheel,[6] just behind the passenger's seat.[3] The engine had two sets of contact breaker points and, to reverse, the engine was stopped and then restarted, going backwards. This was effected by pushing the key further in the ignition switch than normal, whether intentionally or not. One result of this was that the KR200's sequential, positive-stop transmission provided the car with the same four gear ratios available in reverse as in forward movement.[6]


Instruments and controls of a KR201 Roadster

Apart from the dual-mode ignition, the KR200 had a steering bar reminiscent of that of an aircraft. Operated by pushing rather than by turning, the steering bar was connected directly to the track rods of the front wheels, providing an extremely direct response best suited to small, measured inputs.[4][14] The gearshift lever had a secondary lever on it which, when actuated, would put the car in neutral regardless of what gear it had been in before, although the transmission would have to be shifted back to first before the car would be able to move from a standstill.

Unlike the KR175, the KR200 had a full set of pedals: clutch, brake, and accelerator. The brake pedal still operated mechanical brakes using cables.[6]


There are car clubs in Europe, the US, and elsewhere that still value these cars, usually for their quirky character rather than their actual monetary value. Nonetheless, some collectors will pay over 20,000 euros for a well-maintained "Schmitt".

Aftermarket reproduction parts are made for the KR200, including reproduction bubble tops made from car-safe polymethyl methacrylate.


Granada Television's Fred Talbot is seen driving a Messerschmitt KR200 on the Granada Reports feature Where's Fred? in which the viewer has to identify which North West England location the presenter is in that week.

See also



  1. ^ a b c d e "Under the Bubble" p.177
  2. ^ "Ist das nicht ein Kabinenroller?" p.163
  3. ^ a b "Ist das nicht ein Kabinenroller?" p.164-165
  4. ^ a b c d "Ist das nicht ein Kabinenroller?" p.167
  5. ^ "Ist das nicht ein Kabinenroller?" p.162
  6. ^ a b c d e f g h "Ist das nicht ein Kabinenroller?" p.168
  7. ^ Bruce Weiner Microcar Museum: 1955 Messerschmitt KR200
  8. ^ a b c "Erinnern Sie sich? Messerschmitt KR 200: Menschen in Aspik", pp. 74 - 76
  9. ^ a b c "Ist das nicht ein Kabinenroller?" p.169
  10. ^ Cawthon, B. "Fritz Fend's Marvelous Micro-cars"
  11. ^ Bruce Weiner Microcar Museum: 1964 Messerschmitt KR200 Roadster
  12. ^ Canadian Driver: Messerschmitt, 1953-1962
  13. ^ Bruce Weiner Microcar Museum: 1961 Messerschmitt Service Car
  14. ^ a b "Cleared for take-off", p.46


External links

Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Messerschmitt KR175 — Messerschmitt KR200, uno de los microcoches más particulares de posguerra …   Wikipedia Español

  • Messerschmitt KR175 — Manufacturer Regensburger Stahl u. Maschinenbau, Regensburg, Germany Also called Kabineneroller, Karo Mivalino (license built in Italy)[ …   Wikipedia

  • Messerschmitt Kabinenroller — Messerschmitt made two Kabinenroller three wheeled microcars in association with Fritz Fend: the Messerschmitt KR175 (1953 1955), and the Messerschmitt KR200 (1955 1956) These were conceptually based on the Fend Flitzer invalid carriage.… …   Wikipedia

  • Messerschmitt — AG Type first AG, later GmbH Industry Aerospace Fate Merged Successor Messerschmitt Bolkow GmbH (1968) …   Wikipedia

  • Messerschmitt — AG, posteriormente llamada Messerschmitt Bölkow Blohm, fue un famosa empresa aeronáutica alemana, conocida sobre todo por sus aviones de caza producidos durante la Segunda Guerra Mundial, en especial Me 109 y Me 262. La empresa sobrevivió a la… …   Wikipedia Español

  • FMR Tg500 — Manufacturer Regensburger Stahl u. Maschinenbau, Regensburg, Germany Also called Tiger Production 320 …   Wikipedia

  • Верхнеподвесная дверь — См. также: Типы автомобильных дверей Эта статья содержит незавершённый перевод с английского языка. Вы можете помочь проекту, переведя её до конца …   Википедия

  • Vehicle canopy — This article is about vehicle canopies. For aircraft canopies, see Aircraft canopy. For other canopies, see Canopy. Lifting canopy on a Sterling Nova. A vehicle canopy is a rarely used type of door for cars. It has no official name so it is also… …   Wikipedia

  • Microcar — This article is about a category of small automobile. For the brand of automobile, see Microcar (brand). A Messerschmitt KR200. A microcar is the smallest automobile classification usually applied to standard small car (smaller than city cars).… …   Wikipedia

  • Heinkel — Flugzeugwerke Г …   Википедия

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.