Spontaneous potential

In the field of formation evaluation, spontaneous potential (SP) is a naturally occurring electric potential difference in the Earth, measured by an electrode in a borehole relative to a fixed reference electrode on the surface. SP was first recognized by Conrad Schlumberger, Marcel Schlumberger, and E.G. Leonardon in 1931, and the first published examples were from Russian oil fields.

Physics

Spontaneous potentials (SP) are usually caused by charge separation in clay or other minerals, due to presence of semi-permeable interface impeding the diffusion of ions through the pore space of rocks, or by natural flow of a conducting fluid through the rocks.

The origin of SP across formation can be attributed to two processes involving the movement of ions:
*1) Electrokinetic potential ("E"k)
*2) Electrochemical potential ("E"c)

Electrokinetic potential appears when mud filtrate is forced into the formation under the differential pressure between mud column and formation. The electrokinetic potential is produced when the flow takes place across mud-cake in front of permeable formations, across permeable formations being invaded, and across shale beds. It is generally accepted that the electrokinetic potential across the mud-cake is compensated by that across the shale. As such, in most cases, the spontaneous potential measured is only related to the electrochemical potential.

Electrochemical potential ("E""C") is the sum of liquid junction or diffusion potential ("E""J"), and membrane potential ("E""M")Liquid junction potential is established at the direct contact of the mud filtrate and formation water at the edge of the invaded formation. Ions Na+ and Cl- diffuse from either solution to the other, but at different rate due to different mobilities. Na+ tends to be less mobile due to its larger size and affinity for water molecules.

: "E""J" = K1 log10(aw/amf)
where: : "K"1 = 11.6 mV at 25 °C: "a""w" = formation water ionic activity: "a"mf = mud filtrate ionic activity

Membrane Potential develops when two electrolytes of different ionic concentrations, such as mud and formation water, are separated by shale. The clay minerals in shale are usually made up of atom Al, Si, and O. O2- ions occupy the outer layer and cause a net negative charge. Na+ ions from solution are attracted and allowed to pass through the shale, while Cl- ions are repelled. Na+ ions will migrate between the two solutions, with a net influx from the more saline to the less.

: "E""M" = "K"2 log10("a"w/"a"mf)where: : "K"2 = 2.3 "RT"/"F", where:::"R" = ideal gas constant::"T" = absolute temperature in kelvins::"F" = Faraday constant::"a"w = formation water ionic activity::"a"mf = mud filtrate ionic activity

The total electrochemical potential is thus summarized as "E""C" = "E""M" + "E"J" = "K" log10("a"w/"a"mf)

Since spontaneous potential is a measure of electrochemical potential and the ionic activity of a solution is inversely proportional to its resistivity, the above equation can be simplified as SP = "E""C" = "K" log10 ("R"mfe/"R"we), where "R"mfe and "R"we are equivalent mud filtrate resistivity and equivalent formation water resistivity respectively.

The ideal spontaneous potential across clean bed is known as Static SP (SSP), and defined as follow:

:SSP = −"K" log10 ("R"mfe/"R"we)

Applications

The most useful SP component is the electrochemical potential, since it can cause a significant deflection opposite permeable beds. The magnitude of the deflection depends mainly on the salinity contrast between borehole and formation fluid, and the clay content of the permeable bed. The SP log is therefore useful in detecting permeable beds and to estimate formation water salinity and formation clay content. Due to the nature of the electric current, SP can only be recorded in conductive mud.

Determination of "R"w

As established earlier, static SP is defined as follow:

:SSP = −"K" log ("R"mfe/"R"we)

Static SP (SSP) can be obtained directly from the SP curve if the bed is clean, thick, porous, permeable, and only moderately invaded. When these conditions are not met, the recorded SP will need to be corrected. Various correction charts are available for this purpose.

To convert the measured mud filtrate resistivity "R"mf into an equivalent mud filtrate resistivity "R"mfe, the following rules are employed:
* If "R"mf at 75 °F is greater than 0.1 Ω·m, use "R"mfe = 0.85 "R"mf at formation temperature.
* If "R"mf at 75 °F is less than 0.1 Ω·m, derive "R"mfe from "R"mf using Schlumberger Chart SP-2 or equivalent.

Schlumberger Chart SP-2 can then be used to convert "R"we to obtain "R"w.

Interpretation

SP can be affected by several factors that complicates the interpretation. Beside petrochemical component, SP is also affected by electrokinetic potential and bimetallism. Besides, SP is also affected by the following factors:
* Bed thickness ("h"); Since SP is a measurement of electrical potential produced by current in the mud, its amplitude approaches the SSP value only when the resistance to current due to formation and adjacent beds is negligible compared with that of the mud. This condition is met only in thick bed. In thin beds, the SP is proportionally reduced.
* True resistivity ("R""t") of permeable bed; As "R""t"/"R"m increases, the SP deflection decreases, and the bed boundaries are less sharply defined. Presence of hydrocarbons also attenuates SP.
* Resistivity of invaded zone ("R"xo) and mud resistivity ("R"m); SP increases with increase of "R"xo/"R"m
* Diameter of invasion ("d"i); SP decreases as invasion deepens
* Ratio of mud filtrate to formation water salinities: "R"mf/"R"w
* Neighbouring shale resistivity ("R"s); SP increases with increase of "R"s/"R"m
* Hole diameter ("d""h"); With increasing hole size, the value of SP is reduced

Measurement technique

Spontaneous potential can be measure by placing one probe of a voltmeter at the Earth's surface (called surface electrode) and the other probe in the borehole (called downhole electrode), where the SP is to be measured. In fact, logging tools employ exactly this method. Since this measurement is relatively simple, usually SP downhole electrode is built into other logging tools.

ee also

* Spontaneous potential logging

External links

* [http://www.slb.com/content/services/resources/books/log_charts/spontaneous_potential.asp Schlumberger Correction Charts for SP]

References

* M.Gondouin, M.P.Tixier, G.L.Simard, Journal of Petroleum Technology, February 1957, "An Experimental Study on the Influence of the Chemical Composition of Electrolytes on the SP curve"
* Guyod, H., Oil Weekly, 1944, "Electrical Potentials in Bore Holes"
* Pirson, S.J., The Oil and Gas Journal, 1947, "A Study of the SP Curve"


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • spontaneous potential —    See self potential …   Lexicon of Cave and Karst Terminology

  • Spontaneous potential logging — The spontaneous potential log, commonly called the self potential log or SP log, is a measurement taken by oil industry well loggers to characterise rock formation properties. The log works by measuring small electric potentials (measured in… …   Wikipedia

  • Spontaneous symmetry breaking — Quantum field theory (Feynman diagram) …   Wikipedia

  • Spontaneous combustion, or self-heating, of coal —   A naturally occurring process caused by the oxidation of coal. It is most common in low rank coals and is a potential problem in storing and transporting coal for extended periods. Factors involved in spontaneous combustion include the size of… …   Energy terms

  • Cardiac action potential — The cardiac action potential is a specialized action potential in the heart, with unique properties necessary for function of the electrical conduction system of the heart.The cardiac action potential differs significantly in different portions… …   Wikipedia

  • Standard electrode potential — In electrochemistry, the standard electrode potential, abbreviated Eo, E0, or EO (with a superscript plimsoll character, pronounced nought), is the measure of individual potential of a reversible electrode (at equilibrium) at standard state,… …   Wikipedia

  • Membrane potential — Differences in concentration of ions on opposite sides of a cellular membrane lead to a voltage called the membrane potential. Many ions have a concentration gradient across the membrane, including potassium (K+), which is at a high inside and a… …   Wikipedia

  • Evoked potential — Intervention MeSH D005071 An evoked potential (or evoked response ) is an electrical potential recorded from the nervous system of a human or other animal following presentation of a …   Wikipedia

  • End-plate potential — Miniature end plate potentials and end plate spikes recorded from muscle fiber End plate potentials (EPPs) (sometimes called end plate spikes ) are the depolarizations of skeletal muscle fibers caused by neurotransmitters binding to the… …   Wikipedia

  • Reduction potential — (also known as redox potential, oxidation / reduction potential, ORP or Eh) is a measure of the tendency of a chemical species to acquire electrons and thereby be reduced. Reduction potential is measured in volts (V), or millivolts (mV). Each… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.