James H. Burton
James H. Burton (
August 17, 1823- 1895) was born in Shenandoah Spring, Virginia. Educated at the Westchester Academyin Pennsylvania, Burton entered a Baltimoremachine shop at age 16. In April 1844, he went to work at the Harpers Ferry Armory, serving as a machinist. He subsequently served as Foreman of the Rifle Factory Machine Shop, where he gained a considerable amount of knowledge and respect for the work of John H. Hall. Hall pioneered mechanized arms production and interchangeable manufacture at Harpers Ferry between 1820-1840. According to Burton, Hall's Rifle Works housed "not an occasional machine, but a plant of milling machinery by which the system and economy of the manufacture was materially altered." During the next three decades, Burton followed Hall's example by furthering the mechanization of arms production.
The Minié Bullet
In 1849, Burton was promoted to Acting Master Armorer. During the next four years, Burton experimented with improved designs for the Minié bullet at Harpers Ferry. The Minié bullet, introduced in 1848 by Captain
Claude Etienne Miniéof the French Army, was a conical slug of lead slightly more than half an inch in diameter and about an inch long, with a hollow base which expanded when the rifle was fired. This prevented leakage of the powder gases, and served to expand the base of the bullet outward into the riflings of the gun barrel. Its effective range was from 200 to 250 yards – a significant improvement over previous bullets.
Burton carefully documented his work in a set a detailed drawings. These drawings show that he was experimenting with several different Minié bullet designs. According to Colonel
Benjamin Hugerof the Ordnance Department, Burton was studying the "tige" and Minié principles (the "tige" bullet had a steel stem designed to expand the bullet into the weapon's rifling). Burton designed a barrel which used a hard metal plug to expand the bullet into the rifling, and developed a hollow-base bullet design that worked even better. In 1855, Burton's modified design for the Minié bullet was adopted by the U.S. Army.
James Burton at the Enfield Armory
In 1854, Burton left Harpers Ferry to take a job with the Ames Manufacturing Company of
Chicopee, Massachusetts, which supplied both federal armories with precision machinery for the manufacture of firearms. Just one year later, in June 1855, Burton accepted a five-year contract as Chief Engineer of the Royal Small Arms Manufactory in Enfield, England. Here, Burton was responsible for setting up new production machinery purchased in the United States, much of it from Ames.
Burton returned briefly to Harpers Ferry in June 1859 to marry Eugenia Harper Mauzy. The wedding took place in the Harpers Ferry
Presbyterian Churchon Shenandoah Street in the Lower Town. Just four months later, after their return to England, James and Eugenia Burton learned the startling news of John Brown's Raid in a series of emotional letters from Eugenia's parents, George and Mary Mauzy.
James Burton at the Richmond Armory
The sectional divisiveness brought about by John Brown's Raid soon affected the life of James H. Burton. On January 21, 1860, the Virginia assembly passed a bill "For the better defence [sic] of the State." The old
Virginia Manufactory of Arms– renamed the Richmond Armoryin 1861 – was reactivated after being shut down for 38 years. When J.R. Anderson & Company was awarded a large contract to supply machinery for the reactivated manufactory, the firm engaged Burton to engineer the Richmond Armory contract in November 1860. On December 4, Burton returned to Harpers Ferry to obtain model rifled musketpatterns and components for his new employer, returning to Richmond with a large portfolio of drawings.
In June 1861, Burton was appointed superintendent of the Richmond Armory, where his complete familiarity with the machinery for manufacturing
United Statesfirearms proved indispensable to the Confederacy. In fact, much of the machinery at Richmond had been confiscated from the Harpers Ferry Armory by Confederate forces in June 1861 under Burton's own direction.
Burton was commissioned Lieutenant Colonel in the
Confederate States Armyin December 1861, and placed in charge of all Southern armories. In June 1862, Burton left Richmond for Macon, Georgia, where he established a new armory for the Confederacy. One year later Burton traveled to England to "purchase and contract for the machinery, tools and material required for the new Armory." Burton returned to Macon in October 1863, where he awaited delivery of several shipments of machinery from the firm Greenwood & Batleyof Leeds, England. The machinery and tools were finally shipped to Bermudain late 1864, where they awaited reshipment to run the Union naval blockade. But then the Civil War ended.
Burton was taken prisoner along with the Confederate garrison at Macon in April 1865. He subsequently signed the "Oath of Allegiance to the United States" and on October 4, 1865, was granted a Presidential pardon by
After the Civil War
After the war, Burton returned to England to superintend a new armory for Greenwood & Batley. Returning to the United States in 1868, Burton took up residence in
Leesburg, Virginia. He returned to Leeds, England in 1871 to engineer a firearms contract for the Russian Government. But ill health intervened, and in 1873 he returned to Virginia for good and took up farming near Winchester, Virginia. Here, James H. Burton died in 1894, far removed from the weapons technology he had been so instrumental in developing.
* "Colonel James H. Burton Papers" (Manuscript Group #117). Yale University, Sterling Memorial Library, Manuscripts and Archives.
* Edwards, William B, "One-Man Armory: Colonel J.H. Burton." Virginia Cavalcade, Autumn, 1962.
* Gordon, Robert B., "The Burton Drawings at Harpers Ferry." Unpublished manuscript. Smithsonian document JB.mss-200891.
* Lord, Francis A., Civil War Collector's Encyclopedia. Edison, New Jersey: Blue & Grey Press, 1989.
* Smith, Merritt Roe, Harpers Ferry Armory and the New Technology. Ithaca: Cornell University Press, 1977.
* [http://www.nps.gov/archive/hafe/burton.htm James H. Burton at Harpers Ferry]
Wikimedia Foundation. 2010.
Look at other dictionaries:
James Burton (disambiguation) — James Burton may refer to:*James Burton (1761–1837) (1761 1837), British builder and developer *James Burton (Egyptologist) (1788–1862), British egyptologist *James H. Burton (1823 1895), Confederate soldier *James Burton, guitarist *Jim Burton,… … Wikipedia
James Burton — (born August 21, 1939, in Minden, Louisiana) is an American guitarist. Biography A member of the Rock and Roll Hall of Fame since 2001 (his induction speech was given by longtime fan Keith Richards), Burton has also been recognized by the… … Wikipedia
James Burton (Gitarrist) — James Burton James Burton (* 21. August 1939 in Minden, Louisiana) ist ein US amerikanischer Gitarrist. Inhaltsverzeichnis … Deutsch Wikipedia
James Burton — Datos generales Nacimiento Minden, Luisiana (Estados Unidos), 21 d … Wikipedia Español
James burton (guitariste) — Pour James Burton, l égyptologue, voir James Burton James Burton (né le 21 août 1939 à Minden, en Louisiane) est un guitariste américain, membre du Rock and Roll Hall of Fame. Mais est surtout considéré comme le guitariste d Elvis Presley de 1969 … Wikipédia en Français
James Et La Pêche Géante — Titre original James and the Giant Peach Réalisation Henry Selick Scénario Karey Kirkpatrick Musique Randy Newman Production … Wikipédia en Français
James et La Grosse Pêche — James et la Pêche géante James et la Pêche géante Titre original James and the Giant Peach Réalisation Henry Selick Scénario Karey Kirkpatrick Musique Randy Newman Production … Wikipédia en Français
James et la grosse pêche (film, 1996) — James et la Pêche géante James et la Pêche géante Titre original James and the Giant Peach Réalisation Henry Selick Scénario Karey Kirkpatrick Musique Randy Newman Production … Wikipédia en Français
James Alan Hetfield — James Hetfield bei einem Konzert in Wien (2007) James Alan Hetfield (* 3. August 1963 in Downey, Los Angeles County, Kalifornien) ist Sänger, Frontmann, Rhythmusgitarrist (teilweise auch Leadgitarrist) und einer der … Deutsch Wikipedia
James Iredell, Jr. — (* 2. November 1788 in Chowan County, North Carolina; † 13. April 1853 ebenda) war ein amerikanischer Politiker und 23. Gouverneur von North Carolina. Inhaltsverzeichnis 1 Frühe Jahre 2 Politischer Aufstieg 3 … Deutsch Wikipedia