- Vision mixer
A vision mixer (also called video switcher, video mixer or production switcher) is a device used to select between several different
videosources and in some cases composite (mix) video sources together and add special effects. This is similar to what a mixing consoledoes for audio.
Typically a vision mixer would be found in a professional
televisionproduction environment such as a television studio, cable broadcast facility, commercial production facility, remote truck/OB Van or linear video editingbay. The term can also refer to the person operating the device.
"Vision mixer" and "video mixer" are almost exclusively
European terms to describe both the equipment and operators. In the United States, the common name for a device of this kind is "(video) production switcher" and the common name for the operator of the device is known as technical director.
Capabilities and usage in TV Productions
Besides hard cuts (
switching directly between two input signals), mixers can also generate a variety of transitions, from simple dissolves to pattern wipes. Additionally, most vision mixers can perform keying operations and generate color signals (called mattes in this context). Most vision mixers are targeted at the professional market, with newer analog models having component videoconnections and digital ones using SDI. They are used in live and video taped televisionproductions and for linear video editing, even though the use of vision mixers in video editing has been largely supplanted by computerbased non-linear editing.
Older professional mixers worked with
composite videoinputs. There are still a number of consumer video switchers with composite video, S-Videoor even FireWireavailable. These are often used for VJing, presentations, and small multi-camera productions.
The main concept of a professional vision mixer is the "bus", basically a row of buttons with each button representing a video source. Pressing such a button will set the video out of that bus. Older video mixers had two equivalent buses (called the A and B bus, such a mixer is known as an "A/B mixer"). One of these buses could be selected as the main out (or "program") bus. Most modern mixers, however, have one bus that is always the program bus, the second main bus being the preview bus. These mixers are called "flip-flop mixers", since the selected source of the preview and program buses can be exchanged. Both preview and program bus usually have their own
Another main feature of a vision mixer is the "transition lever", also called a "T-bar" or "Fader Bar". This lever, similar to an audio fader, creates a
transitionbetween two buses. Note that in a flip-flop mixer, the position of the main transition lever does not indicate which bus is active, since the program bus is "always" the active or "hot" bus. Instead of moving the lever by hand, a button (commonly labeled "mix" "auto" or "auto trans") can be used, which performs the transition over a user-defined period of time. Another button, usually labeled "cut" or "take", directly swaps the buses without any transition. The type of transition used can be selected in the transition section. Common transitions include dissolves (similar to an audio crossfade) and pattern wipes.
The third bus on a vision mixer is the "key bus". A mixer can actually have more than one of these, but they usually share only one set of buttons. Here, a signal can be selected for keying into the program. The image that will be seen in the program is called the "fill", while the mask used to create the keys' translucence is called the "source". This source, e.g.
chrominance, luminance, pattern (the internal pattern generator is used) or split (an additional video signal similar to an alpha channelis used) and can be selected in the keying section of the mixer. Note that instead of the key bus, other video sources can be selected for the fill signal, but the key bus is usually the most convenient method for selecting a key fill. Usually, a key is turned on and off the same way a transition is. For this, the transition section can be switched from program (or "background") mode to key mode.
These three main buses together form the basic mixer section called "Program/Preset" or "P/P". Bigger production mixers may have a number of additional sections of this type, which are called "Mix/Effects" ("M/E" for short) and numbered. Any M/E section can be selected as a source in the P/P stage, making the mixer operations much more versatile, since effects or keys can be composed "offline" in an M/E and then go "live" at the push of one button.
After the P/P section, there is another keying stage called the "downstream keyer". It is mostly used for keying text or graphics, and has its own "Cut" and "Mix" buttons. The signal before the downstream keyer is called "clean feed". After the downstream keyer is one last stage that overrides any signal with black, usually called "FTB" or "Fade To Black".
Modern vision mixers may also have additional functions, such as
machine control, aux channels for routing signals to other sources than the program out, macro programming and DVE ( Digital Video Effects) capabilities.
Since vision mixers combine various video signals such as
VTRs and video cameras, it is very important that all these sources are properly synchronized. In professional facilities a sync generator feeds all the equipment. Sync can also be achieved by sending out a black burst signal from the switcher (this method is called " " Genlock" "). Signals which cannot be synchronized (either because they originate outside the facility or because the particular equipment doesn’t accept external sync) must go through a frame store synchronizer. Some vision mixers have internal " “frame-syncs” " or they can be a separate piece of equipment, such as a "time base corrector". If the mixer is used for video editing, the editing console (which usually controls the vision mixer remotely) must also be synched. Most larger vision mixers divide the control panel from the actual circuitry because of noise, temperature and cable length considerations. The control panel is located in the production control room, while the main unit, to which all cables are connected, is located in a machine room alongside the other hardware.
Some Manufacturers of vision mixers
NewTek( Video Toaster)
Snell & Wilcox
* Thomson Grass Valley
* Focus Enhancements (Videonics)
*cite web | title=Tools of the trade | work=renewedvision.com | url=http://www.renewedvision.com/support.php?item=tools | accessmonthday=May 10 | accessyear=2007
*cite web | title=Ampex Production Switcher | work=CSU-Pueblo Television Production Handbook | url=http://faculty.colostate-pueblo.edu/samuel.ebersole/handbook/switcher.html| accessmonthday=February 28 | accessyear=2005
* Luff, John: " [http://broadcastengineering.com/mag/broadcasting_production_switchers_2/ Production switchers] ". "Broadcast Engineering",
November 1 2002
* Moore, Jeff: " [http://www.rossvideo.com/synergy/switchers.html Production Switcher Primer] ". "Ross Video Production Switcher Primer".
Wikimedia Foundation. 2010.
Look at other dictionaries:
vision mixer — noun 1. A technician who blends or combines different camera shots in television or films 2. A piece of equipment for doing this • • • Main Entry: ↑vision * * * ˈvision mixer 7 [vision mixer vision mixers] … Useful english dictionary
vision mixer — vaizdų mišrinimo inžinierius statusas T sritis profesijos apibrėžtis Televizijos studijos inžinierius, atsakingas už vaizdų, gaunamų iš jų kūrėjo, perjungimą ir mišrinimą. atitikmenys: angl. mixer; switcher; switchman; video engineer; video… … Inžinieriai, technikai ir technologai. Trikalbis aiškinamasis žodynėlis
Vision mixer — A&V European term for video production switcher … Audio and video glossary
vision mixer — /ˈvɪʒən mɪksə/ (say vizhuhn miksuh) noun a television technician responsible for switching transmission from one camera to another, from camera to film, etc., at the discretion of the director … Australian English dictionary
Software vision mixer — A software vision mixer provides similar functionality to that of a hardware vision mixer. However, certain specific advantages and disadvantages can be outlined.For instance, software vision mixers provide more flexibility for number of channels … Wikipedia
Mixer — may refer to: An electronics device: DJ mixer, a type of audio mixing console used by disc jockeys Electronic mixer, a device for adding or multiplying signal voltages together Frequency mixer, a telecommunications device used to shift the… … Wikipedia
mixer — vaizdų mišrinimo inžinierius statusas T sritis profesijos apibrėžtis Televizijos studijos inžinierius, atsakingas už vaizdų, gaunamų iš jų kūrėjo, perjungimą ir mišrinimą. atitikmenys: angl. mixer; switcher; switchman; video engineer; video… … Inžinieriai, technikai ir technologai. Trikalbis aiškinamasis žodynėlis
vision — n. & v. n. 1 the act or faculty of seeing, sight (has impaired his vision). 2 a a thing or person seen in a dream or trance. b a supernatural or prophetic apparition. 3 a thing or idea perceived vividly in the imagination (the romantic visions of … Useful english dictionary
Mixer — A&V • European term for production switcher. Complete term is vision mixer. • A circuit which can mix two or more video signals. • An audio console for combining audio sources … Audio and video glossary
ingénieur de la vision — vaizdų mišrinimo inžinierius statusas T sritis profesijos apibrėžtis Televizijos studijos inžinierius, atsakingas už vaizdų, gaunamų iš jų kūrėjo, perjungimą ir mišrinimą. atitikmenys: angl. mixer; switcher; switchman; video engineer; video… … Inžinieriai, technikai ir technologai. Trikalbis aiškinamasis žodynėlis