Compression fitting

A compression fitting 15 mm isolating valve

Compression fittings are used in plumbing and electrical conduit systems to join two tubes or thin-walled pipes together. In instances where two pipes made of dissimilar materials are to be joined (most commonly PVC and copper), the fittings will also be made of one or more compatible materials appropriate for the connection. Compression fittings for attaching tubing (piping) commonly have ferrules (or olives in the UK) in them.

Compression fittings are also used extensively for hot and cold water faucets (taps) and toilet stop valves; compression fittings are well suited to this application, as these valves are usually located in confined spaces where copper pipe would be difficult to solder without creating a fire hazard.

Compression fittings are the industry standard for chemical, oil and gas, R&D, Bio-tech, and the semiconductor industry.[citation needed] They are used due to their ability to provide leak tight seals. These fittings can be remade.

Contents

How they work

The compression fitting is composed of an outer compression nut and an inner compression ring; or ferrule that is usually made of brass or copper. Ferrules vary in shape and material but are most commonly in the shape of a ring with beveled edges and they are most commonly made out of brass or according to the pipe material. To work properly, the ferrule must be oriented correctly; typically the ferrule is fitted such that the longest sloping face of the ferrule faces away from the nut.

When the nut is tightened, the ferrule is compressed between the nut and the receiving fitting; the ends of the ferrule are clamped around the pipe, and the middle of the ferrule bows away from the pipe, making the ferrule effectively thicker. The result is that the ferrule seals the space between the pipe, nut, and receiving fitting, thereby forming a tight joint.

Thread sealants such as joint compound (pipe "dope") or thread seal tape (PTFE tape, or Teflon tape) are inappropriate for use on compression fitting threads; while such sealants protect against leaks in normal threaded connections, they serve little purpose in compression fittings and may actually serve to weaken them.[citation needed] The compression of the ferrule (rather than the sealing of the threads) is the means of sealing the joint in a compression fitting, and extraneous sealants frequently interfere with this condition; for instance, thread seal tape can provide a means for a gap to form between the ferrule and the nut.

It is important to the integrity of a compression fitting that excessive force be avoided when tightening the nut. If the nut is overtightened, the ferrule frequently deforms improperly causing the joint to fail. Indeed, overtightening is the most common cause of leaks in compression fittings. A good rule of thumb is to tighten the nut first by hand until it is too difficult to continue and then tighten the nut a half-turn more with the aid of a wrench; the actual amount varies with the size of the fitting, as a larger one requires less tightening. The fitting is then tested: If slight weeping is observed, the fitting is slowly tightened until the weeping stops.

The most important component in a compression fitting is the ferrule itself, which is extremely prone to damage. Care should be used when installing it (although if it becomes defective, it is easy to install a replacement). Master plumbers have been known in some instances to replicate the sealing action of the ferrule by using an artfully "woven" piece of thread seal tape. This is usually attempted as a temporary solution to prevent a leak until new parts can be procured.

Types of fittings

There are two common types of compression fitting, standard (British, type-A/non-manipulative) and flare fittings (British, type-B/manipulative). Standard fittings require no modifications to the tubing. Flare fittings require modification of the tubing with a special tool. Standard fittings are generally used for water and compressed air connections, while flare fittings are used for gas and high pressure lines.

A standard fitting can be installed using an ordinary wrench to tighten the surrounding nut. To remove it, a specialized puller is often used to slide the nut and ferrule off the tube.

Advantages

Compression fittings are popular because they do not require soldering, so they are comparatively quick and easy to use. They require no special tools or skills to operate. They work at higher pressures and with toxic gases. Compression fittings are especially useful in installations that may require occasional disassembly or partial removal for maintenance etc, since these joints can be broken and remade without affecting the integrity of the joint. They are also used in situations where a heat source, in particular a soldering torch, is prohibited.

Disadvantages

Compression fittings are not as robust as soldered fittings. They should be used in applications where the fitting will not be disturbed and not subjected to flexing or bending. A soldered joint is highly tolerant of flexing and bending (such as when pipes knock or shake from sudden pressure changes). Compression fittings are much more sensitive to these type of dynamic stresses. They are also bulkier, and may be considered less aesthetically pleasing than a neatly soldered joint.

See also

Notes and references

External links


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Fitting — can refer to: # Any machine, piping or tubing part that can attach or connect two or more larger parts. For examples, see coupling, compression fitting or piping and plumbing fittings. # The process of applying regression analysis to data. This… …   Wikipedia

  • Compression shorts — are undergarments usually worn by athletes. They are form fitting garments and when worn cover the athlete s waist to mid or lower thigh. These garments are often made from a spandex type material, similar to cycling shorts. A major benefit of… …   Wikipedia

  • Compression sportswear — is clothing usually worn by athletes. They may be shorts, tights or underwear. They are form fitting garments and when worn cover the athlete s waist to mid or lower thigh. These garments are often made from a spandex type material. The main… …   Wikipedia

  • Compression seal fitting — A Compression seal fitting, also known as a sealing gland, is intended to seal some type of element (probe, wire, conductor, pipe, tube, fiber optic cable) when the element must pass through a pressure or environmental boundary. A compression… …   Wikipedia

  • compression clothing — /kəmˈprɛʃən kloʊðɪŋ/ (say kuhm preshuhn klohdhing) noun form fitting clothing made from a stretchy fabric and worn by athletes, which keeps the muscles warm and draws sweat away from the body, thus preventing rashes …   Australian English dictionary

  • Flare fitting — Flare fittings are a type of compression fitting used with metal tubing, usually ductile (soft) copper, though other materials are also used.Tube flaring is considered a forging operation. [Manufacturing and Engineering Technology: Serope… …   Wikipedia

  • Cutting ring fitting — before assembly Cutting ring fitting assembled. 1 Body 2 …   Wikipedia

  • Push to pull compression fittings — Push to Pull, or Push to Connect, compression fittings are a type of compression fitting that allows air line to be attached without the use of tools. These compression fittings act the same way as regular air line fittings but use a reusable… …   Wikipedia

  • Pipe fitting — is the occupation of installing or repairing piping or tubing systems that convey liquid, gas, and occasionally solid materials. This work involves selecting and preparing pipe or tubing, joining it together by various means, and the location and …   Wikipedia

  • Nerve compression syndrome — Trapped nerve redirects here. For other uses, see Trapped nerve (disambiguation). Nerve compression syndrome Classification and external resources ICD 9 355.9 MeSH …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.