ASTM F 571
ASTM F 571 is a standard practice for installation of exit devices in security areas. This standard was created by the American Standard for Testing and Materials (ASTM). ASTM International which was funded in 1898, is an international standards developing organization that develops and publishes standards for a wide range of materials, products, systems, and services. This standard was published by ASTM F12.50 which is a committee specializes about locking devices. This standard practice deals with information regarding the installation of exit devices used in areas of security in order to reach the more great security level without violating the requirements of NFPA 101. NFPA is the National Fire Protection Association. In this paper NFPA 101, the NFPA introduce a code writing process and its performance-based activities.
The main keywords to present this standard are exit device; exit device installation; security; and security areas.
* [http://www.veridion.net/ Veridion information security compliance directory]
* [http://www.astm.org/ ASTM International]
Wikimedia Foundation. 2010.
Look at other dictionaries:
ASTM D6751 — 08 details standards and specifications for biodiesels blended with middle distillate fuels. This specification standard specifies various test methods to be used in the determination of certain properties for biodiesel blends. Some of the tests… … Wikipedia
NOACK Volatility Test — The NOACK Volatility Test, otherwise known as ASTM D 5800, determines the evaporation loss of lubricants in high temperature service. The more motor oils vaporize, the thicker and heavier they become, contributing to poor circulation, reduced… … Wikipedia
Farbeindringprüfung — 1. Reinigung 2. Farbe auftragen und eindringen lassen 3. Oberflächliches reinigen 4. Entwickler auftragen Die Eindringprüfung (nach DIN EN 571 1: Eindringprüfung, allgemeine Grundlagen) ist eine zerstörungsfreie Werkstoffprüfung, bei der die… … Deutsch Wikipedia
Dye penetrant inspection — 1. Section of material with a surface breaking crack that is not visible to the naked eye. 2. Penetrant is applied to the surface. 3. Excess penetrant is removed. 4. Developer is applied, rendering the crack visible. Dye penetrant inspection… … Wikipedia
Texture (crystalline) — In materials science, texture is the distribution of crystallographic orientations of a polycrystalline sample. A sample in which these orientations are fully random is said to have no texture. If the crystallographic orientations are not random … Wikipedia
Hafnium — lutetium ← hafnium → tantalum Zr ↑ Hf ↓ Rf … Wikipedia
HSL and HSV — Fig. 1. HSL (a–d) and HSV (e–h). Above (a, e): cut away 3D models of each. Below: two dimensional plots showing two of a model’s three parameters at once, holding the other constant: cylindrical shells (b, f) of constant saturation, in this case… … Wikipedia
Autoignition temperature — The autoignition temperature or kindling point of a substance is the lowest temperature at which it will spontaneously ignite in a normal atmosphere without an external source of ignition, such as a flame or spark. This temperature is required to … Wikipedia
Titane — Scandium ← Titane → Vanadium … Wikipédia en Français
Conversion of units — is the conversion between different units of measurement for the same quantity, typically through multiplicative conversion factors. Contents 1 Techniques 1.1 Process 1.2 Multiplication factors … Wikipedia