Blade geometry


Blade geometry

The term Blade geometry refers to the physical properties of a sword blade: cross-section and taper.

Cross-Section

The cross section of a blade is the primary way of determining its function and place in history.

Early Middle Ages

Early Viking and medieval European blades tended to have a lenticular cross-section. This is primarily a lozenge or apple seed type of design that lacks a strong central ridge in the middle of the blade. The flexibility these blades have illustrates the purpose that they served, as primarily cutting weapons, that could also be used with the thrust.

Late Middle Ages

With the improvement in the defensive capabilities of armor in the High and Late Middle Ages, the cross-section of the sword blade adapted to suit the needs of warriors. Swords began to favour rigidity over flexibility as more rigid blades allowed for the stronger thrusts that were used to pierce armour. These blades were made with a diamond cross-section, which could be more or less acute, depending on the purpose of the blade. Weapons such as the Estoc, for example, would have little to no cutting edge, but they would be very rigid and strong on the thrust. This is opposed by the Longsword which was usually a multi purpose weapon used for both thrusting and cutting.

The diamond cross-section could also be hollow ground for additional strength on the thrust. A hollow ground blade has a very strong central ridge which provides its rigidity and thrusting power.

Taper

There are two types of physical blade taper, distal and profile.

Distal tapering refers to a blade's cross-section thinning from its base to its tip. This is used to create the handling characteristics of individual blades and the amount of distal taper varies depending upon the intended purpose of the blade. It should be noted that many modern replica blades are not made with any distal taper, resulting in a blade that, when wielded, will feel unresponsive and heavy.

Profile taper refers to narrowing upon the edges of the flat of the blade. Blades with a more gradual taper are meant for cutting, whereas blades with an acute taper are usually meant for thrusting

References

http://www.myarmoury.com/feature_properties.html


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Blade — For other uses, see Blade (disambiguation). Knife blades A blade is that portion of a tool, weapon, or machine with a cutting edge and/or a pointed tip that is designed to cut and/or puncture, stab, slash, chop, slice, thrust, or scrape animate… …   Wikipedia

  • Bicycle and motorcycle geometry — Rake (angle) redirects here. For cutting geometry, see Rake angle. Bike wheelbase, head angle, fork offset (AKA rake), and trail Bicycle and motorcycle geometry is the collection of key measurements (lengths and angles) that define a particular… …   Wikipedia

  • Solid geometry — In mathematics, solid geometry was the traditional name for the geometry of three dimensional Euclidean space mdash; for practical purposes the kind of space we live in. It was developed following the development of plane geometry. Stereometry… …   Wikipedia

  • Straight razor — A straight razor with square point and a double transverse stabiliser Main article: Razor A straight razor is a razor with a blade that can fold into its handle.[1] …   Wikipedia

  • Longsword — For other uses, see Longsword (disambiguation). Longsword Swiss longsword, ca. 1500 (Morges museum) Type Sword …   Wikipedia

  • Wide chord — A wide chord fan engine is a term to describe a modern turbofan jet engine having a ducted fan with a specific blade geometry In layman s terms, they would be described as having wider blades than other jet engines.OverviewThe main fan on a jet… …   Wikipedia

  • Torque converter — A torque converter is a modified form of fluid coupling that is used to transfer rotating power from a , such as an internal combustion engine or electric motor, to a rotating driven load. Like a basic fluid coupling, the torque converter… …   Wikipedia

  • Multivector — p vector redirects here. For other uses, see K vector (disambiguation). In multilinear algebra, a multivector or clif is an element of the (graded) exterior algebra on a vector space, Λ * V. This algebra consists of linear combinations of simple… …   Wikipedia

  • Wallace Sword — The Wallace Sword is an antique claymore purported to have belonged to William Wallace (1270 – 1305), a knight and Scottish patriot who led a resistance to the English occupation of Scotland during the Wars of Scottish Independence. It is said to …   Wikipedia

  • Kriegsmesser — A Kriegsmesser was a large, curved, single edged two handed sword typically around the same length as the longsword or hand and a half sword. They were popular in the 15th and 16th century Germany. The name literally translates from German to War …   Wikipedia


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.