- Schrader valve
The Schrader valve, invented by
August Schraderin the 1890s, consists of a valve steminto which a valve core is threaded, and is used on virtually all automobile tiresand wider rimmed bicycletires. The valve core is a poppet valveassisted by a spring. Schrader valves are also used on the fuel railof some direct fuel injection engines and on some refrigerationand air conditioningsystems, in a fitting larger than those used on tires, to allow servicing, including recharging with refrigerant. In addition, Schrader valves are sometimes used on irrigationsystems to provide a place to temporarily attach a portable pressure gauge and they are often found on the buoyancy compensator hose of SCUBAregulator systems, allowing the user to remove the hose and attach the hose while in use.
A Schrader valve consists of a hollow cylindrical metal tube, typically
brass, with the exterior end threaded. The interior end takes a variety of forms depending on its application. A new development is Schrader valve stems with integrated transmitters for tire pressure monitoring systems (TPMS).
In the center of the exterior end is a metal pin pointing along the axis of the tube; the pin's end is approximately flush with the end of the valve body.
Generally, all Schrader valves used on tires have threads and bodies of a single standard size at the exterior end, so caps and tools generally are universal for the valves on all pneumatic tires on automobiles, bicycles, and even lawnmowers, hand trucks and wheelbarrows (at least in the United States). Most air hose fittings for inflating tires, generally referred to as chucks, actually are not threaded; instead, they seal to the threads by compressing a rubber collar around the threads, or they simply seal to the end of the valve tube with a gasket (usually of rubber) which is sealed by manual pressure. For the former type, the threads are still important because they have essentially the same effect as concentric ridges around the valve tube, giving the rubber something to conform around for a firm grip against the force of pressure, which would tend to push the fitting off of the valve. Both tire chucks and tire gauges include a built in fixed pin to depress the valve core's stem as you apply the tool to the valve.
Depressing the pin is also the method for manually relieving the pressure retained by the valve (for example, when a tire is over-inflated or needs to be deflated but the core removal tool is unavailable). As mentioned above, a pressure gauge, when pressed firmly onto the end of a valve, depresses the pin to open the valve so that the pressure inside can be measured. Deliberately not pressing the gauge firmly is a common practice when a tire is to be intentionally deflated.
The valve cap
A valve cap is essential on a Schrader valve because if one is not fitted, dirt and water can enter the outside of the valve, potentially jamming it or contaminating the sealing surfaces and causing a leak. Rock salt and other chemical deicers used in the winter are especially damaging for the brass components in the Schrader valve.
Metal valve caps usually have, in addition to a handy deflating tool, a small rubber insert to permit a good seal against the valve body; a cap of this kind also helps to prevent air escaping from a slightly leaking valve. However, the vast majority of Schrader valves used for tires are fitted with plain black plastic caps which effectively serve only to keep contaminants out of the valve stem.
There are also special pressure monitoring valve caps available that use a spring loaded piston to raise a green flag when the pressure is at or above the correct setting. Upon losing pressure the green flag is retracted to reveal a red pin, hopefully catching the attention of the owner before fuel is wasted by running the tire under-inflated.
Recently, colored plastic valve stem caps have appeared. Certain automobile tire dealerships are promoting the use of dry
nitrogento inflate tires. Eliminating oxygen and water is said to prolong the life of both tires and wheels. These dealers install green caps to signify that the tires are filled with nearly pure (typically about 95%) nitrogen.
Other vendors are selling caps in a variety of other colors for purely decorative purposes. The decorative category even includes caps that light up when the wheels move.
Presta vs. Schrader
Presta and Schrader valves are both good at sealing high pressures. Their chief differences are that Schrader valves are larger and have springs that close the valve except when the pin is depressed. Schrader valves are used in car tires, bicycle tires, mountain bike air shocks, and in many types of compressed gas and compressed liquid systems. Presta valves are used only for bicycle tires.
Schrader valves used for bicycle tires have a greater diameter than Presta valves and the larger diameter hole required for a Schrader valve will weaken a narrow wheel rim. For this reason, Schrader valves are not used in the narrow wheel rims of racing bicycles. Another disadvantage of the Schrader valve is that, when inflating a tire, the air chuck must depress the pin before air can flow. The chuck and its use is therefore more complex. The Presta valve relies solely on internal air pressure—not a spring—to keep it shut (although it can be manually tightened after inflation). Schrader valves close and stay shut regardless of pressure until the pin is depressed.
A rim drilled for Presta valves may be converted to accept Schrader valves, by drilling it out with a 21/64" drill bit, but care must be taken to de-burr the resulting hole to prevent damage to the tire and innertube.
Screw on adapters are available at bike shops to give a Presta valve the diameter required for using standard air fittings.
Schrader valves are classified by their material, diameter of intended rim hole, length, and shape.
*TR-4 - straight metal stem (8 mm dia.)
*TR-6 - straight metal stem (8 mm dia.)
*TR-13 - straight rubber stem (11.5 mm dia.)
*TR-15 - straight rubber stem (16 mm dia.)
*TR-87 - short 90° metal stem (10 mm dia.)
*TR-87C - tall 90° metal stem (10 mm dia.)
The standard Schrader valve has the following threads:
*Metric: 7.7 mm OD, thread root diameter is 6.9 mm x 0.794 mm pitch.
*English: 0.305 in OD, thread root diameter 0.302 in x 32 tpi (threads per inch)
Internal thread (to accept the threaded valve core)
*Metric: 5.30 mm OD x 0.706 mm pitch
*English: 0.209 in OD x 36 tpi.
For refrigeration, a 1/4" male
flare fittingis used, with the same internal thread as above.
* [http://www.schraderbridgeport.com Schrader-Bridgeport website]
Wikimedia Foundation. 2010.
Look at other dictionaries:
Schrader valve —  A bicycle tire valve similar to the type found on automobile tires. Also see Presta valve.  A spring loaded valve, similar to a tire valve, located inside the service valve fitting to hold refrigerant in the system. Special adapters with… … Dictionary of automotive terms
Schrader — may refer to:People: *August Schrader (1820 ?), German American inventor *Barry Schrader (born 1945), American composer *Carol Schrader (born 1951), American TV presenter *Clement Schrader (1820–1875), German Jesuit theologian *David Schrader… … Wikipedia
Valve (velo) — Valve (vélo) Sur un vélo, une valve est un élément inséparable de la chambre à air visible sur la jante et qui permet de gonfler ou de dégonfler la roue. Il existe principalement trois types de valves de chambre à air de vélo : les valves… … Wikipédia en Français
Valve stem — For the shaft which transmits motion from the outside to the inside of a valve, see Valve#Stem. A valve stem is a self contained valve which opens to admit gas to a chamber (such as air to inflate a tire), and is then automatically closed and… … Wikipedia
Valve — This article is about the flow control device. For the game developer, see Valve Corporation. For the electronic component, see Vacuum tube. For other uses, see Valve (disambiguation). These water valves are operated by handles. A valve is a… … Wikipedia
Valve (vélo) — Sur un vélo, une valve est un élément inséparable de la chambre à air visible sur la jante et qui permet de gonfler ou de dégonfler la chambre à air. Il existe principalement trois types de valves de chambre à air de vélo : les valves… … Wikipédia en Français
valve — A device used to either open or close an opening to allow or prevent the flow of a liquid or gas from one place to another. There are many different types. See ABS relay valve accumultor valve air valve carburetor air control valve air gulp valve … Dictionary of automotive terms
Schrader — Cette page d’homonymie répertorie les différents sujets et articles partageant un même nom. Schrader est un nom de famille d origine germanique. Il s agit d une variante de Schröder. August Schrader (1820 ?), entrepreneur germano américain … Wikipédia en Français
August Schrader — (1820 ?) was an enterprising German American immigrant who set up a shop dealing in rubber products in Manhattan, New York CIty, USA. His original shop was located at 115 John Street. In 1845, he began supplying fittings and valves for rubber… … Wikipedia
Poppet valve — A poppet valve is a valve consisting of a hole, usually round or oval, and a tapered plug, usually a disk shape on the end of a shaft also called a valve stem. The shaft guides the plug portion by sliding through a valve guide. In most… … Wikipedia