Groundwater model

Groundwater models are computer models of groundwater flow systems, and are used by hydrogeologists. Groundwater models are used to simulate and predict aquifer conditions.

Characteristics

An unambiguous definition of "groundwater model" is difficult to give, but there are many common characteristics. A groundwater model may be a scale model or an electric model of a groundwater situation or aquifer. Usually, however, a groundwater model is meant to be a (computer) program for the calculation of groundwater flow and level. Some groundwater models include (chemical) quality aspects of the groundwater.

Groundwater models may be used to predict the effects of hydrological changes (like groundwater abstraction or irrigation developments) on the behavior of the aquifer and are often named groundwater simulation models. As the calculations are based on mathematical equations, often with numerical (approximate) solutions, these models are also called mathematical/numerical groundwater models.

For the calculations one needs (hydrological) inputs, (hydraulic) parameters, initial and boundary conditions.

The input is usually the inflow into the aquifer or the recharge, which varies in time and from place to place.

The parameters usually concern the physical properties used in the model that are more or less constant with time but variable in space.

Important parameters are the topography, thicknesses of soil layers and their horizontal/vertical hydraulic conductivity (permeability for water), porosity and storage coefficient, capillarity of the unsaturated zone (see hydrogeology).

Some parameters may be influenced by changes in the groundwater situation, like the thickness of a soil layer that may reduce when the water table drops and/the hydraulic pressure is reduced. This phenomenon is called subsidence. The thickness, in this case, is variable in time and not a parameter proper.

Initial conditions and boundary conditions can be related to levels, pressures, and hydraulic head on the one hand (head conditions), or to groundwater recharge, discharge, inflow and outflow on the other hand (flow conditions).

The applicability of a groundwater model to a real situation depends on the accuracy of the input data and the parameters. Determination of these requires considerable study, like collection of hydrological data (rainfall, evapotranspiration), and determination of the parameters mentioned before including pumping tests. As many parameters are quite variable in space, expert judgment is needed to arrive at representative values.

The models can also be used for the "if-then analysis": if the value of a parameter is A, then what is the result, and if the value of the parameter is B instead, what is the influence? This analysis may be sufficient to obtain a rough impression of the groundwater behavior, but it can also serve to do a "sensitivity analysis" to answer the question: which factors have a great influence and which have less influence. With such information one may direct the efforts of investigation more to the influential factors.

When sufficient data have been assembled, it is possible to determine some of missing information by "calibration". This implies that one assumes a range of values for the unknown or doubtful value of a certain parameter and one runs the model repeatedly while comparing results with known corresponding data.

For example if salinity figures of the groundwater are available and the value of hydraulic conductivity is uncertain, one assumes a range of conductivities and the selects that value of conductivity as "true" that yields salinity results close to the observed ones. This procedure is similar to the measurement of the flow in a river or canal by letting very saline water of a known salt concentration drip into the channel and measuring the resulting salt concentration downstream.

Dimensions

Groundwater models can be one dimensional, two dimensional, semi three dimensional and truly three dimensional.

One dimensional models can be used for the vertical flow in a system of parallel horizontal layers.

2-dimensional models apply to a vertical plane while it is assumed that the groundwater conditions repeat themselves in other parallel vertical planes. Spacing equations of subsurface drains are an example of a two-dimensional groundwater model (see for example the page "Groundwater energy balance" where drainage equations based on the energy balance of groundwater flow are discussed).

3-dimensional models require discretization of the entire flow domain, as (mostly) the underlying mathematics cannot be solved analytically so that numerical methods are to be used. To that end the flow region must be subdivided into smaller elements (or cells), in horizontal and vertical sense, within which the parameters are maintained constant (Fig. 3). The flow of groundwater between neighboring cells can be calculated horizontally and vertically using groundwater flow equations.

"Semi 3-dimensional" groundwater models have a grid over the land surface only. The 2-dimensional grid network consists of polygons, rectangles, squares, or triangles (Fig. 4). Hence, the flow domain is subdivided into vertical prisms. The prisms can be discretized into horizontal layers with different characteristics that may also vary between the prisms. The groundwater flow between neighboring prisms is calculated using horizontal groundwater flow equations. Vertical flows are found by applying one-dimensional flow equations in a vertical sense or from the water balance: excess of horizontal inflow over horizontal outflow (or vice versa) is translated into vertical flow. Like the truly 3-dimensional models, such models also permit the introduction of horizontal and vertical subsurface drainage systems (Fig. 2).

Groundwater modeling software & references

* Analytic Element Method
* FEFLOW
* MODFLOW:* GMS:* Visual MODFLOW
* SahysMod, Spatial agro-hydro-salinity-aquifer model
* ZOOMQ3D

ee also

* Aquifer
* Hydrogeology
* Groundwater
* Groundwater flow equation
* Groundwater energy balance
* Watertable control
* Groundwater drainage by wells
* Salinity control


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Groundwater recharge — Water balance Groundwater recharge or deep drainage or deep percolation is a hydrologic process where water moves downward from surface water to groundwater. This process usually occurs in the vadose zone below plant roots and is often expressed… …   Wikipedia

  • Drainage model — may refer to: a surface drainage model or rainfall runoff model      see surface runoff, runoff model (reservoir) , or a software site providing free download of a conceptual rainfall runoff model (RainOff) based on a… …   Wikipedia

  • Global climate model — AGCM redirects here. For Italian competition regulator, see Autorità Garante della Concorrenza e del Mercato. Climate models are systems of differential equations based on the basic laws of physics, fluid motion, and chemistry. To “run” a model,… …   Wikipedia

  • Climate model — This article is about the theories and mathematics of climate modeling. For computer driven prediction of Earth s climate, see Global climate model. Climate models are systems of differential equations based on the basic laws of physics, fluid… …   Wikipedia

  • Atmospheric model — A 96 hour forecast of 850 mbar geopotential height and temperature from the Global Forecast System An atmospheric model is a mathematical model constructed around the full set of primitive dynamical equations which govern atmospheric motions. It… …   Wikipedia

  • Hydrological transport model — An hydrological transport model is a mathematical model used to simulate river or stream flow and calculate water quality parameters. These models generally came into use in the 1960s and 1970s when demand for numerical forecasting of water… …   Wikipedia

  • Runoff model (reservoir) — A runoff model is a mathematical model describing the rainfall runoff relations of a rainfall catchment area or watershed. More precisely, it produces the surface runoff hydrograph as a response to a rainfall hydrograph as input. In other words,… …   Wikipedia

  • MohidLand hydrology model — Overview= MOHID Land is a executable of the MOHID Water Modelling System. Watershed mathematical model or Hydrological transport model designed to simulate Drainage basin and aquifer. In MOHID Land, different processes occurring in a basin are… …   Wikipedia

  • MODFLOW — simulation MODFLOW is the U.S. Geological Survey modular finite difference flow model, which is a computer code that solves the groundwater flow equation. The program is used by hydrogeologists to simulate the flow of groundwater through aquifers …   Wikipedia

  • Watertable control — is the practice of controlling the water table in agricultural land by subsurface drainage with proper criteria to improve the crop production. Contents 1 Description and definitions 1.1 Purpose 1.2 Optimization 1.3 …   Wikipedia


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.