Atmospheric diving suit

. Divers do not even need to be skilled swimmers.

The ADS has variously been referred to as an armored diving suit, armored diving dress, articulated diving suit, Iron Duke, Iron Mike, and 'deep-sea diving robot'. The term 'atmospheric diving suit' itself did not come into widespread use until the invention of the JIM suit in the early 1970s.

Atmospheric Diving Suits in current use include the Newtsuit/Hardsuit, and the WASP, both of which are self-contained and incorporate propulsion units. The Newtsuit/Hardsuit is constructed from cast aluminum (forged aluminum in version constructed for the US Navy for submarine rescue), while the WASP is of glass reinforced plastic body tube, (GRP) construction. The upper hull is made from cast aluminum. The bottom dome is machined aluminum.

History

* 1715: John Lethbridge constructs his " diving engine". Essentially a wooden barrel about convert|6|ft|m in length (1.8m) with two holes for the diver's arms sealed with leather cuffs, and a convert|4|in|mm|sing=on viewport of thick glass. It was reportedly used to dive as deep as 60 feet (18m), and was used to salvage substantial quantities of silver from the wreck of the East Indiaman "Vansittart" which sank in 1718 off the Cape Verdes.cite web | last = Thornton | first = Lt. Mike | authorlink = | coauthors = Dr. Robert Randall, Kurt Albaugh, P.E. | title = Then and Now: Atmospheric Diving Suits | work = | publisher = UNDERWATER MAGAZINE | date = March/April 2001 | url = http://www.underwater.com/archives/arch/marapr01.01.shtml | format = | doi = | accessdate = 2008-05-08]

* 1838: Englishman W. H. Taylor designed the first armored suit with real joints, which were designed as leather pieces with rings in the shape of a spring (also known as accordion joints). The diver's hands and feet were to be covered with leather. Taylor also devised a ballast tank attached to the suit that could be filled with water to attain negative buoyancy. While it was patented, the suit was never actually produced. It is considered that its weight and bulk would have rendered it nearly immobile underwater.

* 1856: Lodner D. Phillips, designs the first wholly enclosed ADS. His design comprised a barrel-shaped upper torso with domed ends and included ball and socket joints in the articulated arms and legs. The arms had joints at shoulder and elbow, and the legs at knee and hip. The suit included a ballast tank, a viewing port, entrance through a manhole cover on top, a hand-cranked propeller, and rudimentary manipulators at the ends of the arms. Air was to be supplied from the surface via hose. There is no indication, however, that Lodner's suit was ever constructed.

* 1882: the Carmagnolle brothers of Marseilles, France, patent the first properly anthropomorphic design of ADS featuring rolling convolute joints consisting of partial sections of concentric spheres formed to create a close fit and kept watertight with a waterproof cloth. The suit had 22 of these joints: four in each leg, six per arm, and two in the body of the suit. The helmet possessed 25 individual convert|2|in|mm|sing=on glass viewing ports spaced at the average distance of the human eyes. [cite journal | last = | first = | authorlink = | coauthors = | title = The Carmagnolle Brothers Armoured Dress | journal = Historical Diving Times | volume = | issue = 37 | pages = | publisher = | location = | date = Autumn 2005 | url = | doi = | id = | accessdate = ]

* 1894: Australian inventors John Buchanan and Alexander Gordon of Melbourne develop an armored suit. The construction was based on a frame of spiral wires covered with waterproof material. The design was improved by Alexander Gordon by attaching the suit to the helmet and other parts and incorporating jointed radius rods in the limbs. This resulted in a flexible suit which could withstand high pressure. The suit was produced by Siebe Gorman and trialed in Scotland in 1898.

* 1914: MacDuffy constructs the first ADS to use ball bearings to provide joint movement. The suit was tested at New York to a depth of 214 feet (65m), but was not very successful.

* 1915: Harry L. Bowdoin of Bayonne, N.J., patents a new type of oil-filled rotary jointed ADS. The joints use a small duct to the interior of the joint to allow equalization of pressure. The suit was designed to have four joints in each arm and leg, and one joint in each thumb, for a total of eighteen. Four viewing ports and a chest-mounted lamp were intended to assist underwater vision. Unfortunately there is no evidence that Bowdoin's suit was ever built, or that it would have worked if it had been.

* 1915: the German firm Neufeldt and Kuhnke build two atmospheric diving suits based on their patented ball and socket joint, using ball bearings to transfer the pressure load, the bearings sealed by rubber skirts. The suit achieved fame during the salvage of gold and silver bullion from the wreck of the SS Egypt, an 8,000 ton Peninsular and Oriental liner that sank in May 1922. The suit was relegated to duties as an observation chamber at the wreck's depth, and was successfully used to direct mechanical grabs which opened up the bullion storage. The German Navy tested the second-generation suit to 530 feet (161m) in 1924, but limb movement was very difficult and the joints were judged not to be fail-safe, in that if they were to fail, there was a possibility that the suit's integrity could be impaired. The German Navy possessed several Neufeldt and Kuhnke suits, called "Panzertaucher" (armored diver) during World War II, which later found their way into Allied hands after the war, and there are unconfirmed reports that the Russian Navy built copies.

*1917: Benjamin F. Leavitt of Traverse City, Michigan, dives on the SS Pewabic which sank in convert|182|ft|m in Lake Huron in 1865, salvaging 350 tons of copper ore. In 1923 he went on to salvage the wreck of the British schooner "Cape Horn" which lay in convert|220|ft|m of water off Pichidangui, Chile, salvaging $600,000 worth of copper. Leavitt's suit was of his own design and construction and he had previously dived to convert|361|ft|m in it in Lake Michigan. The suit used manganese bronze to resist corrosion and weighed only convert|350|lb|kg complete, which reduced to convert|75|lb|kg underwater, and was lined with sheet rubber for insulation. The arms and legs were constructed of flexible copper tubing with ball bearing joints at knee and elbow, while the helmet had four convert|0.5|in|mm windows of shatterproof glass and was equipped with a telephone. The most innovative aspect of Leavitt's suit was the fact that it was completely self-contained and needed no umbilical, breathing mixture being supplied from a tank mounted on the back of the suit. The breathing apparatus incorporated a scrubber and an oxygen regulator and could last for up to a full hour. [cite book | last = Marx | first = Robert F. | authorlink = | coauthors = | title = The History of Underwater Exploration | publisher = Courier Dover Publications | date = 1990 | location = | pages = pp. 79 - 80 | url = | doi = | id = | isbn = 0486264874]

*1919: Boston mechanic Charles H. Jackson constructs an ADS which in 1920 is used by John Turner to reach a depth of convert|360|ft|m.

* 1922: British engineer Joseph Salim Peress patents the first spherical type joint which uses a fluid to equalize pressure, and in 1932 built an ADS which was referred to as the Tritonia, and is now commonly called "Jim I." It was successfully used on the wreck of the RMS Lusitania at a depth of convert|312|ft|m. Peress's expertise was later harnessed to help develop the JIM suit, named after Peress's chief diver Jim Jarrett. This was the first practical working ADS.

* 1952: Alfred A. Mikalow constructs an ADS employing ball and socket joints, specifically for the purpose of locating and salvaging sunken treasure. The suit was reportedly capable of diving to depths of convert|1000|ft|m and was used successfully to dive on the sunken vessel SS City of Rio de Janeiro in convert|328|ft|m of water near Fort Point, San Francisco. Mikalow's suit had various interchangeable instruments which could be mounted on the end of the arms in place of the usual manipulators. It carried seven convert|90|cuft|m3|sing=on high pressure cylinders to provide breathing gas and control buoyancy. The ballast compartment covered the gas cylinders. For communication, the suit used hydrophones. [cite book | last = Burke | first = Edmund H. | authorlink = | coauthors = | title = The Diver's World: An Introduction | publisher = Van Nostrand | date = 1966 | location = | pages = p. 112 | url = | doi = | id = | isbn = ]

* 1969: the JIM suit, possibly the most well-known ADS, is invented by the English firm DHB Construction. [cite journal |author=Carter Jr, RC |title=Evaluation of JIM: A One-Atmosphere Diving Suit. |journal=US Naval Experimental Diving Unit Technical Report |volume=NEDU-05-76 |date=1976 |url=http://archive.rubicon-foundation.org/4790 |accessdate=2008-07-22 ] The first suit was completed in November 1971 and underwent trials aboard HMS Reclaim in early 1972. In 1976 the JIM suit set a record for the longest working dive below 490 feet (149m), lasting five hours and 59 minutes at a depth of 905 feet (275m). The first JIM suits were cast of magnesium because of its high strength-to-weight ratio and weighed around 1,100 pounds in air (including the diver), but the magnesium casting was eventually replaced with glass reinforced plastic (GRP) construction. The GRP suit was known as the JAM suit. A lighter more anthropomorphic suit was built of aluminum or GRP, and was known as the SAM suit. The aluminum model was rated to 1,000 feet (300m) and the GRP suit was rated to 2,000 feet (610m). JIM was eventually surpassed by the WASP Suit (Its sister ADS), and the NEWT Suit, as oil platforms gradually removed subsea walk-ways. Such walk-ways were essential to bottom-walking suits, as JIM was never fitted with any kind of propulsion.

* 1987: the Newt Suit, developed by the Canadian engineer Phil Nuytten. The Newt Suit is constructed to function like a 'submarine you can wear', allowing the diver to work at normal atmospheric pressure even at depths of over 300 metres. Made of cast aluminium, it has fully-articulated joints so the diver can move more easily underwater. The life-support system provides 6–8 hours of air, with an emergency back-up supply of an additional 48 hours.

* 1997: the ADS 2000, developed jointly with [http://www.oceanworks.com OceanWorks International Corp.] and the US NAVY is an evolution of the Newt Suit to meet US Navy requirements. The ADS2000 provides increased depth capability for the US Navy's Submarine Rescue Program. Manufactured from forged T6061 aluminum alloy it uses an advanced articulating joint design based on the Newt Suit joints. Capable of operating in up to convert|2000|ft|m of seawater for a normal mission of up to six hours it has a self contained, automatic life support system. Additionally, the integrated dual thruster system allows the pilot to navigate easily underwater.

* 2006: the ADS 2000, becomes fully operational and certified by the US Navy during full depth diving off southern California. The existing US Navy program has four ADS 2000 Suits and three self erecting Launch and Recovery Systems. The system is designed to fly away to a rescue site on various military and commercial aircraft.

External links

* [http://www.oceanworks.com/atmosphericDivingSystems.php OceanWorks International's HARDSUIT 1200]
* [http://www.oceanworks.com/hsCommercial.php OceanWorks International's HARDSUIT 2000]
* [http://www.oceaneering.com/diving.asp?id=924 WASP Suit]
* [http://www.nwrain.net/~newtsuit/home/newtsuit/ns_ovr.htm Hard Suit]
* [http://www.divingheritage.com/armoredkern8.htm Photo of Buchanan-Gordon ADS]
* [http://www.divingheritage.com/armored6.htm Photo Of MacDuffy's ADS (1914)]
* [http://www.divingheritage.com/armoredkern1.htm Early Armored Suits]
* [http://www.divingheritage.com/armoredkern2.htm Photos of 1882 Carmagnolle ADS]
* [http://www.divingheritage.com/armored.htm Historic Armored Suits]
* [http://www.divingheritage.com/atmospheric.htm Atmospheric suits]
* [http://www.aberdeenquest.com/Artwork/NewtSuit.asp NewtSuit]
* [http://www.navy.mil/search/display.asp?story_id=25000 US Navy Chief goes to convert|2000|ft|m]
* [http://www.therebreathersite.nl/12_Atmospheric%20Diving%20Suits/Atmospheric%20Diving%20Suits.htm ADS database in therebreathersite.nl]

References

*


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Diving suit — Two divers, one wearing a 1 atmosphere diving suit and the other standard diving dress, preparing to explore the wreck of the RMS Lusitania, 1935 A diving suit is a garment or device designed to protect a diver from the underwater environment.… …   Wikipedia

  • Diving equipment — Surface supplied commercial diving equipment on display at a trade show Diving equipment is equipment used by underwater divers for the purpose of facilitating diving activities. This may be equipment primarily intended for this purpose, or… …   Wikipedia

  • Diving watch — Omega Seamaster model 2220.80, with a water resistance of 300 m (1,000 ft). The second crown (at 10 o clock) is a helium release valve. A diving watch is a watch designed for underwater diving that features, as a minimum, a water… …   Wikipedia

  • Diving cylinder — Diving cylinders to be filled at a diving air compressor station …   Wikipedia

  • Diving physics — explains the effects that divers and their equipment are subject to underwater. Contents 1 Laws of physics for diving 2 Physical effects of water for divers 3 Physical phenomena of interest to divers …   Wikipedia

  • Timeline of diving technology — This is a timeline of underwater technology. The entries marked ## are about decompression tables.[1] Contents 1 Pre industrial 2 19th century 2.1 Rebreathers appear …   Wikipedia

  • Decompression (diving) — Divers decompressing in the water at the end of a dive Decompression in the context of diving derives from the reduction in ambient pressure experienced by the diver during the ascent at the end of a dive or hyperbaric exposure and refers to both …   Wikipedia

  • Deep diving — The meaning of the term deep diving is a form of technical diving.[1] It is defined by the level of the diver s diver training, diving equipment, breathing gas, and surface support: in recreational diving, PADI define anything from 18 metres / 60 …   Wikipedia

  • JIM suit — acted as their main inspiration. The suit was named after Jim Jarrett, Peress chief diver. History The petrochemical industry was unwilling to finance their research, but a grant was obtained from the British government, and a new company, DHB… …   Wikipedia

  • Environmental suit — An environmental suit is a suit designed specifically for a particular environment, usually one otherwise hostile to humans. An environment suit is typically a one piece garment, and many types also feature a helmet or other covering for the head …   Wikipedia


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.