Image-guided radiation therapy

Image-guided radiation therapy (IGRT) is the process of frequent two and three-dimensional imaging, during a course of radiation treatment, used to direct radiation therapy utilizing the imaging coordinates of the actual radiation treatment plan. The patient is localized in the treatment room in the same position as planned from the reference imaging dataset. An example of Three-dimensional (3D) IGRT would include localization of a cone-beam computed tomography (CBCT) dataset with the planning computed tomography (CT) dataset from planning. Similarly Two-dimensional (2D) IGRT would include matching planar kilovoltage (kV) radiographs fluoroscopy or megavoltage (MV) images with digital reconstructed radiographs (DRRs) from the planning CT.

This process is distinct from the use of imaging to delineate targets and organs in the planning process of radiation therapy. However, there is clearly a connection between the imaging processes as IGRT relies directly on the imaging modalities from planning as the reference coordinates for localizing the patient. The variety of image gathering hardware used in planning includes Computed Tomography(CT), Magnetic Resonance Imaging (MRI), and Positron Emission Tomography (PET) among others. Through advancements in imaging technology, combined with a further understanding of human biology at the molecular level, the impact of IGRT on radiotherapy treatment continues to evolve.

Goals and Clinical Benefits

The goal of the IGRT process is to improve the accuracy of the radiation field placement, and to reduce the exposure of healthy tissue during radiation treatments. In years past, larger planning target volume (PTV) margins were used to compensate for localization errors during treatment. (Jaffray et al. 1999) This resulted in healthy human tissues receiving unnecessary doses of radiation during treatment. PTV margins are the most widely used method to correct geometric uncertainties. By improving precision and accuracy through IGRT, radiation is decreased to surrounding healthy tissues, allowing for increased radiation to the tumour for control. (Jaffray et al. 1999)

Currently, certain radiation therapy techniques employ the process of Intensity Modulation Radiotherapy. (IMRT) This form of radiation treatment uses computers and linear accelerators to sculpt a three-dimensional radiation dose map, specific to the target’s location, shape and motion characteristics. Because of the level of precision required for IMRT, detailed data must be gathered about tumour locations. The single most important area of innovation in clinical practice is the reduction of the planning target volume margins around the location. The ability to avoid more normal tissue and/or employ dose escalation strategies is a direct by-product of the ability to execute therapy with the most accurate geometric precision. (Jaffray et al. 1999)

IGRT will continue to increase the amount of data collected throughout the course of therapy. Over the course of time, whether for an individual or a population of patients, this information will allow for the continued assessment and further refinement of treatment techniques. The clinical benefit for the patient is the ability to monitor and adapt to changes that may occur during the course of radiation treatment. Such changes can include tumour shrinkage or expansion, or changes in shape of the tumour and surrounding anatomy. (Jaffray et al. 1999)

Rationale for IGRT

Radiation therapy is a local treatment that is designed to treat the defined tumour and spare the surrounding normal tissue from receiving doses above specified dose tolerances. There are many factors that may contribute to differences between the planned dose distribution and the delivered dose distribution. One such factor is uncertainty in patient position on the treatment unit. IGRT is a component of the radiation therapy process that incorporates imaging coordinates from the treatment plan to be delivered in order to ensure the patient is properly aligned in the treatment room. (Dawson & Sharpe 2006)

The localization information provided through IGRT approaches can also be used to facilitate robust treatment planning strategies and enable patient modelling, which is beyond the scope of this article.

History of “guidance” for treatment

Surface and Skin marks

Guiding the placement of the treatment field is not a new concept. Since the advent of fractionated radiation therapy for the treatment of disease, techniques have been employed to help ensure the accurate placement of a treatment field. [http://www.radiologyinfo.org/index.cfm?bhcp=1]

In general, at the time of 'planning' (whether a clinical mark up or a full simulation) the intended area for treatment is outlined by the radiation oncologist. Once the area of treatment was determined, marks were placed on the skin. The purpose of the ink marks was to align and position the patient daily for treatment to improve reproducibility of field placement. By aligning the markings with the radiation field (or its representation) in the radiation therapy treatment room, the correct placement of the treatment field could be identified. (Dawson & Sharpe 2006)

Over time, with improvement in technology – light fields with cross hairs, isocentric lasers – and with the shift to the practice of 'tattooing' - a procedure where ink markings are replaced with a permanent mark by the application of ink just under the first layer of skin using a needle in documented locations - the reproducibility of the patient’s setup improved. [http://www.radiologyinfo.org/index.cfm?bhcp=1]

Portal imaging

It is difficult to establish the initial use of portal imaging to define radiation field placement. From the early days of radiation therapy, X-rays or Gamma rays were used to develop large format radiographic films for inspection. With the introduction of Cobalt-60 machines in the 1950s, radiation went deeper inside the body, but with lower contrast and poor subjective visibility. Today, using advancements in digital imaging devices, the use of electronic portal imaging has developed into both a tool for accurate field placement and as a quality assurance tool for review by radiation oncologists during check film reviews. (Dawson & Sharpe 2006)

Electronic Portal Imaging

Electronic portal imaging is the process of using digital imaging, such as a CCD video camera, liquid ion chamber and amorphous silicon flat panel detectors to create a digital image with improved quality and contrast over traditional portal imaging. The benefit of the system is the ability to capture images, for review and guidance, digitally. These systems are in use throughout clinical practice. Current reviews of Electronic Portal Imaging Devices (EPID) show acceptable results in imaging irradiations and in most clinical practice, provide sufficiently large fields-of-view. (Jaffray et al. 1999)

Imaging for treatment guidance

Fluoroscopy

Fluoroscopy is an imaging technique that uses a fluoroscope, in coordination with either a screen or image-capturing device to create real-time images of patients’ internal structures.

Computed tomography (CT)

A medical imaging method employing tomography where digital geometry processing is used to generate a three-dimensional image of the internal structures of an object from a large series of two-dimensional X-ray images taken around a single axis of rotation. CT produces a volume of data, which can be manipulated, through a process known as windowing, in order to demonstrate various structures based on their ability to attenuate and prevent transmission of the incident X-ray beam.

Conventional CT

With the growing recognition of the utility of CT imaging in using guidance strategies to match treatment volume position and treatment field placement, several systems have been designed that place an actual conventional 2-D CT machine in the treatment room alongside the treatment linear accelerator. The advantage is that the conventional CT provides accurate measure of tissue attenuation, which is important for dose calculation. (e.g. CT on rails) (Dawson & Sharpe 2006)

Cone beam

cone-beam computed tomography (CBCT) based image guided systems have been integrated with medical linear accelerators to great success. With improvements in flat-panel technology, CBCT has been able to provide volumetric imaging, and allows for radiographic or fluoroscopic monitoring throughout the treatment process. Cone beam CT acquires many projections over then entire volume of interest in each projection. Using reconstruction strategies pioneered by Feldkamp, the 2D projections are reconstructed into a 3D volume analogous to the CT planning dataset.

MVCT

Megavoltage Computed Tomography is a medical imaging technique that uses the Megavoltage range of X-rays to create an image of bony structures or surrogate structures within the body. The original rational for MVCT was spurred by the need for accurate density estimates for treatment planning. Both patient and target structure localization were secondary uses. A test unit using a single linear detector, consisting of 75 cadmium tunstate crystals, was mounted on the linear accelerator gantry. The test results indicated a spatial resolution of .5m, and a contrast resolution of 5% using this method. While another approach could involve integrating the system directly into the MLA, it would limit the number of revolutions to a number prohibitive to regular use.

Optical Tracking

The use of a camera to relay positional information of objects within its inherent coordinate system by means of a subset of the electromagnetic spectrum of wavelengths spanning ultra-violet, visible, and infrared light. Optical navigation has been in use for the last 10 years within image guided surgery (neurosurgery, ENT, and orthopaedic) and has increased in prevalence within radiotherapy to provide real-time feedback through visual cues on graphical user interfaces (GUIs). For the latter, a method of calibration is used to align the camera’s native coordinate system with that of the isocentric reference frame of the radiation treatment delivery room. Optically tracked tools are then used to identify the positions of patient reference set-up points and these are compared to their location within the planning CT coordinate system. A computation based on least-squares methodology is performed using these two sets of coordinates to determine a treatment couch translation that will result in the alignment of the patient’s planned isocenter with that of the treatment room. These tools can also be used for intrafraction monitoring of patient position by placing an optically tracked tool on a region of interest to either initiate radiation delivery (i.e. gating regimes) or action (i.e. repositioning).

Correction Strategies for patient positioning during IGRT

There are two basic correction strategies used while determining the most beneficial patient position and beam structure: on-line and off-line correction. Both serve their purposes in the clinical setting, and have their own merits. Generally, a combination of the both strategies is employed. Often, a patient will receive corrections to their treatment via on-line strategies during their first radiation session, and physicians make subsequent adjustments off-line during check film rounds. (Jaffray et al. 1999)

On-line

The On-line strategy makes adjustment to patient and beam position during the treatment process, based on continuously updated information throughout the procedure. (Dawson & Sharpe 2006) The on-line approach requires a high-level of integration of both software and hardware. The advantage of this strategy is a reduction in both systematic and random errors. An example is the use of a marker-based program in the treatment of prostate cancer at Princess Margaret Hospital. Gold markers are implanted into the prostate to provide a surrogate position of the gland. Prior to each day’s treatment, portal imaging system results are returned. If the centre of the mass has moved greater than 3mm, then the couch is readjusted and a subsequent reference image is created. (Jaffray et al. 1999)

Off-line

The Off-line strategy determines the best patient position through accumulated data gathered during treatment sessions. These strategies utilize sophisticated CT hardware to create future procedures. Additionally, physicians and staff measure the success of treatment, and devise treatment guides during check film rounds using information from the EPIDs. The strategy requires greater coordination of clinic-wide systems than on-line strategies. However, the use of off-line strategies reduces the risk of systematic errors.

Future Areas of Study

*The debate between the benefits of on-line versus off-line strategies continues to be contended.
*Whether further research into biological functions and movements can create a better understanding of tumour movement in the body before, between and during treatment.
*When rules or algorithms are used, large variations in PTV margins can be reduced. Margin “recipes” are being developed that will create linear equations and algorithms that account for “normal” variations. These rules are created from a normal population, and are applied to the treatment plan off-line. Possible side effects include random errors from uniqueness of the target
*With a greater amount of data being collected, how systems must will be established for the categorizing and storing of information.

ee also

*Radiation Therapy

*CT scanner
*Fluoroscopy
*Medical Radiography
*Compton scattering
*Cobalt-60
*Cone beam Reconstruction
*PET
*MRI
*ICRU

External links

* [http://www.radiationatpmh.com/body.php?id=45 Image Guided Radiation Therapy, Radiation Medicine Program, Princess Margaret Hospital]
* [http://www.igrt.ca IGRT Education Course, Princess Margaret Hospital]
* [http://www.sttarr.ca STTARR]

References

*Cossmann, Peter H. Advances in Image-guided Radiotherapy - The Future is in Motion. European Oncology Review 2005 - July (2005)
*citation |last= Dawson |first= LA | author-link = | last2 = Sharpe| first2 = MB | contribution =|title= Image-guided radiotherapy: rationale, benefits, and limitations |year= 2006 |periodical= Lancet Oncol. |month=October |volume= 7 |issue= 10 |page= 848-858 |
*cite book |last= Jaffray |first= DA |coauthors= JP Bissonnette, T Craig |contribution= |title= Modern Technology of Radiation Oncology |origyear= 1999 |publish Medical Physics Publishing, |location= Madison, WI |chapter= X-ray Imaging for Verification and Localization in Radiation Therapy in Modern Technology of Radiation Oncology (suppl. 1) |isbn= 0-944838-38-3
*cite book |last= Sharpe |first= MB |coauthors= T Craig, DJ Moseley |contribution= |title= Frontiers in Radiation Therapy Oncology |origyear= 2007 |publish Medical Physics Publishing, |location= Madison, WI |chapter= Image Guidance: Treatment Target Localization Systems in IMRT-IGRT-SBRT – Advances in the Treatment Planning and Delivery of Radiotherapy. |volume= 40|isbn= 978-3805581998
*http://cancer.stanfordhospital.com/forPatients/services/radiationTherapy/intensityModulatedRadiother/default
*http://www.medicalimagingmag.com/issues/articles/2006-10_01.asp
*http://www.radiologyinfo.org/index.cfm?bhcp=1


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Radiation therapy — Radiation (medicine) redirects here. It is not to be confused with Radiation (pain) or Radiology. Radiation therapy Intervention ICD 10 PCS D ICD 9 CM …   Wikipedia

  • Particle therapy — Intervention ICD 9: 92.26 Particle therapy is a form of external beam radiotherapy using beams of energetic protons, neutrons, or positive ions for cancer treatment. The most common …   Wikipedia

  • Laser interstitial thermal therapy — The term laser interstitial thermal therapy (LITT, also referred to as laser induced interstitial thermotherapy or laser induced thermotherapy or interstitial laser therapy) is a surgical procedure in which destruction of soft tissues in the body …   Wikipedia

  • External beam radiotherapy — otherwise known as teletherapy, is the most frequently used form of radiotherapy. The patient sits or lies on a couch and an external source of radiation is pointed at a particular part of the body. Kilovoltage (also known as Superficial or Deep) …   Wikipedia

  • Elekta — (OMX|SSE806|EKTA B) provides clinical solutions for the treatment of cancer and brain disorders. The company also develops tools and treatment planning systems for radiation therapy and radiosurgery, as well as workflow enhancing software systems …   Wikipedia

  • Radioterapia — Saltar a navegación, búsqueda Acelerador Clinac 2100 C100, para tratamiento de radioterapia La radioterapia es una forma de tratamiento basado en el empleo de radiaciones ionizantes (rayos X o radiactividad, la que incluye los rayos gamm …   Wikipedia Español

  • University of Iowa Hospitals and Clinics — Infobox Hospital Name = University of Iowa Hospitals and Clinics Org/Group = Caption = Location = 200 Hawkins Drive Region = Iowa City State = Iowa Country = US HealthCare = Medicare/Medicaid/Privatecite… …   Wikipedia

  • St. Vincent's Medical Center — Infobox Hospital Name = St. Vincent s Medical Center Org/Group = Ascension Health http://www.danisconstruction.com/images/Whats New/St%20Vincents%20Medical%20Center.jpg] Caption = Where The Experts Care… …   Wikipedia

  • Magnetic resonance imaging — MRI redirects here. For other meanings of MRI or Mri, see MRI (disambiguation). Magnetic resonance imaging Intervention Sagittal MR image of the knee ICD 10 PCS B?3?ZZZ …   Wikipedia

  • Cyberknife — The CyberKnife is a frameless robotic radiosurgery system used for treating benign tumors, malignant tumors and other medical conditions.[1][2] The system was invented by John R. Adler, a Stanford University Professor of Neurosurgery and… …   Wikipedia


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.