Metes and bounds
Metes and bounds is a system or method of describing land, real property (in contrast to personal property) or real estate. The system has been used in England for many centuries, and is still used there in the definition of general boundaries. By custom, it was applied in the original Thirteen Colonies that became the United States, and in many other land jurisdictions based on English common law.
Typically the system uses physical features of the local geography, along with directions and distances, to define and describe the boundaries of a parcel of land. The boundaries are described in a running prose style, working around the parcel in sequence, from a point of beginning, returning back to the same point. It may include references to other adjoining parcels (and their owners), and it, in turn, could also be referred to in later surveys. At the time the description is compiled, it may have been marked on the ground with permanent monuments placed where there were no suitable natural monuments.
The term "metes" refers to a boundary defined by the measurement of each straight run, specified by a distance between the terminal points, and an orientation or direction. A direction may be a simple compass bearing, or a precise orientation determined by accurate survey methods. The term "bounds" refers to a more general boundary description, such as along a certain watercourse, a stone wall, an adjoining public road way, or an existing building.
The system is often used to define larger pieces of property (e.g. farms), and political subdivisions (e.g. town boundaries) where precise definition is not required or would be far too expensive, or previously designated boundaries can be incorporated into the description.
A typical description for a small parcel of land would be: "beginning with a corner at the intersection of two stone walls near an apple tree on the north side of Muddy Creek road one mile above the junction of Muddy and Indian Creeks, north for 150 rods to the end of the stone wall bordering the road, then northwest along a line to a large standing rock on the corner of John Smith's place, thence west 150 rods to the corner of a barn near a large oak tree, thence south to Muddy Creek road, thence down the side of the creek road to the starting point."
The sequence begins with an identified corner serving as benchmark, then gives distance, direction and various boundary descriptions as if one were walking the bounds pacing off the distance to the next corner where there is a change of direction. Generally where watercourses form part of the bounds their meander is taken as a straight line between the established corners and their monuments.
In many deeds, the bearing is described not by a clockwise degree measure out of 360 degrees, but instead by indicating a direction north or south (N or S) followed by a degree measure out of 90 degrees and another direction west or east (W or E). For example, such a bearing might be listed as "N 42°35' W", which means that the bearing is 42°35' counterclockwise (to the west) from north.
This has the advantage of providing the same degree measure regardless of which direction a particular boundary is being followed; the boundary can be traversed in the opposite direction simply by exchanging N for S and E for W. In other words, "N 42°35' W" describes the same boundary as "S 42°35' E", but is traversed in the opposite direction.
In most distance measures, especially those in older deeds and where measuring distances over a furlong, boundary lengths are listed in rods or poles instead of feet or meters. Rods and poles are equivalent measures equaling 16.5 feet. There are four rods in one chain. The old English surveyors actually carried chains 66 feet in length with which to measure lengths, as well as poles 16.5 feet long, and many older legal descriptions of real estate in the United States are given in chains and poles.
Some courts have established a list of priorities to resolve inconsistent descriptions of corners. In descending order starting with the most reliable: (1) natural monuments, (2) artificial monuments such as roads and marked or surveyed lines, (3) adjacent tracts or boundaries, (4) courses or directions, (5) distances, and (6) area or quantity.
Once such a survey is in place, the corners may have to depend on tradition and long use to establish the line along the boundaries between them. In some areas where land was deeded before 1693 the lengths given predate the changes to the length of the furlong and mile by Queen Elizabeth I. In other places references to the official borders of towns, counties, states and even the U.S. may have changed. Compass directions always have to be tied to a table of annual deflections because magnetic north is constantly changing. The description might refer to landmarks such as the large oak tree which could die, rot and disappear; or be confused with a different tree that had grown over time. Streams might dry up, meander or change course. Man-made features such as roads, walls, markers or stakes used to mark corners and determine the line of the boundaries between corners may have been moved. As these features move, change and disappear over time, when it comes time to re-establish the corners along the line of these boundaries (for sale, subdivision, or building construction) it can become difficult, even impossible, to determine the original location of the corner. In the metes and bounds system, corners, distance, direction, monuments and bounds are always carried back to the original intent regardless of where they are now. Court cases are sometimes required to settle the matter when it is suspected the corner markers may have been moved.
These kinds of problems caused the United States to largely replace this system except in the east. Beginning with the Land Ordinance of 1785, it began a transition to the Public Land Survey System (PLSS) used in the central and western states. The eastern, or original states, continue to use the metes and bounds surveys of their founders.
History of use in the United States
This system was imported to the original colonies that formed the United States. It is also used in some states that were previously part of one of the Thirteen Colonies, or where land was allocated before 1785. These include West Virginia, Kentucky, Maine, Tennessee and Vermont.
Use in patent law
In patent law, an application provides background and disclosure necessary to describe an invention, but it is the claims that define the protected aspects. It is therefore said that the claims set out the metes and bounds (see, e.g. in United States patent law, Manual of Patent Examining Procedure § 2173.05(a)) for the protected invention. As a deed might describe a parcel of land, a patent claim carves out systems, methods, etc. that are infringed by something meeting every single one of the claim features. Moreover, an applicant must present an argument for patentability (or, in the United States, an argument against a prima facie case of non-patentability) based only on features found within the claims. The requirement to clearly define the metes and bounds of a claim is found in United States patent law at least at 35 U.S.C. 112, second paragraph, which states, "[t]he specification shall conclude with one or more claims particularly pointing out and distinctly claiming the subject matter which the applicant regards as his invention."
- Public Land Survey System
- Lot and Block survey system
- Township, civil township, survey township
Wikimedia Foundation. 2010.
Look at other dictionaries:
metes and bounds — / mēts ənd bau̇ndz/ n pl [translation of Anglo French metes et boundes]: the boundaries or limits of a tract of land esp. as described by reference to lines and distances between points on the land Merriam Webster’s Dictionary of Law. Merriam… … Law dictionary
metes and bounds — [mēts] n. [see METE2] Law the precisely described boundary lines of a parcel of land, as found in a deed … English World dictionary
metes and bounds — /meets/ the boundaries or limits of a piece of land. [1275 1325; late ME; trans. of AF metes et boundes. See METE2, BOUND3] * * * ▪ land description limits or boundaries of a tract of land as identified by natural landmarks, such as rivers … Universalium
metes and bounds — noun plural Etymology: translation of Anglo French metes et boundes 1. : the boundaries or limits of a tract of land; specifically : the boundaries of land established by reference to natural or artificial monuments along it (as a stream, ditch,… … Useful english dictionary
metes and bounds — A name for a type of property description used to identify parcels of land for which the legal identification is expressed in surveying terms. Metes means measurements and bounds means boundaries. A metes and bounds description gives the length… … Financial and business terms
metes and bounds — noun a) The limits of a piece of land as defined by reference to lines and/or points on the land. b) A description of a piece of land consisting of both measurements (metes) of the land and owners of land which is adjacent to (bounds) it … Wiktionary
metes and bounds — /miyts an bawndz/ The boundary lines of land, with their terminal points and angles. A way of describing land by listing the compass directions and distances of the boundaries. It is often used in connection with the Government Survey System. See … Black's law dictionary
metes and bounds — The boundary lines and marks of a piece of land. A means of description of land in a deed. 23 Am J2d Deeds § 228 … Ballentine's law dictionary
metes and bounds — (Law) precise boundaries of a piece of land as detailed in a deed … English contemporary dictionary
butts and bounds — A phrase used in conveyancing, to describe the end lines or circumscribing lines of a certain piece of land. The phrase metes and bounds has the same meaning. The angles or points where these lines change their direction. See abuttals metes and… … Black's law dictionary