Electricity generation is the process of converting non-electrical
energyto electricity. For electric utilities, it is the first process in the delivery of electricity to consumers. The other processes, electric power transmissionand electricity distribution, are normally carried out by the electrical power industry. Electricity is most often generated at a power stationby electromechanical generators, primarily driven by heat engines fueled by chemical combustionor nuclear fissionbut also by other means such as the kinetic energy of flowing water and wind. There are many other technologies that can be and are used to generate electricity such as solar photovoltaics.
Centralised power generation became possible when it was recognized that
alternating currentpower lines can transport electricityat very low costs across great distances by taking advantage of the ability to raise and lower the voltageusing power transformers.
Electricity has been generated at central stations since 1881. The first power plants were run on water power or coal, [ [http://www.ieee-virtual-museum.org/collection/event.php?id=3456876&lid=1 Pearl Street Station: The Dawn of Commercial Electric Power] ] and today we rely mainly on
coal, nuclear, natural gas, hydroelectric, and petroleumwith a small amount from solar energy, tidal harnesses, wind generators, and geothermal sources.
The demand for electricity is met in several ways. Large centralized generators have been the primary method thus far.
Distributed generationuses a larger number of smaller generators throughout the electricity network. Some use waste heat from industrial processes, others use fuels that would otherwise be wasted, such as landfill gas.
Wind and solar generation tend to be distributed because of the low density of the natural energy they collect.
Methods of generating electricity
There are seven fundamental methods of directly transforming other forms of energy into electrical energy:
Static Electricity, the physical separation and transport of charge ("eg." triboelectric effectand lightning)
Electromagnetic induction(as in an electrical generator, dynamoor alternator) transforms mechanical energy into electricity
Electrochemistry(direct transformation of chemical energyinto electricity, as in a battery, fuel cellor nerve impulse.)
Photoelectric effect(transforming photon energy, as in solar cells)
Thermoelectric effect(direct thermal energy differential to electric conversion, as in thermocouplesand thermopiles)
Piezoelectric effect(from the mechanical strain of electrically anisotropicmolecules/crystals)
*Nuclear transformation, charged particle creation and acceleration ("eg."
Betavoltaicsor alpha particleemission) Static electricitywas the first form discovered and investigated, and the electrostatic generatoris still used even in modern devices such as the Van de Graaff generatoror MHD generators. Electrons are physically (mechanically) separated and transported to increase their electric potential.
The vast majority of commercial electric generation is done via electromagnetic induction:
mechanical energyis used to supply the energy to rotate an electrical generator. There are many different methods of developing the mechanical energy, such as heat engines, hydro, wind or tidal generators "etc.")
Note that the direct conversion of
nuclear energyto electricity ( beta decay) is not how a nuclear power plant produces electricity; instead it uses the heat of a nuclear reaction to run a heat engine, and transforms the heat engine's resulting mechanical energy into electricity via magnetic induction (a generator).
Most electric generation is driven by
heat engines. The combustion of fossil fuelssupplies most of the heat to these engines, with a significant fraction from nuclear fissionand some from renewable sources.
All turbines are driven by a fluid acting as an intermediate energy carrier. A lot of all of the heat engines just mentioned are
turbines. Other types of turbines can be driven by wind or falling water.
*Steam - Water is boiled by:
**the burning of fossil fuels (coal, natural gas, or petroleum). In hot gas (gas turbine), turbines are driven directly by gases produced by the
combustionof natural gas or oil. Combined cyclegas turbine plants are driven by both steam and natural gas. They generate power by burning natural gas in a gas turbineand use residual heat to generate additional electricity from steam. These plants offer efficiencies of up to 60%.
**Renewables. The steam generated by:
***The sun as the heat source:
solar parabolic troughs and solar power towers concentrate sunlight to heat a heat transfer fluid, which is then used to produce steam.
Geothermal power. Either steam under pressure emerges from the ground and drives a turbine or hot water evaporates a low boiling liquid to create vapour to drive a turbine.
* Other renewable sources:
**Water (hydroelectric) - Turbine blades are acted upon by flowing water, produced by hydroelectric dams or tidal forces.
**Wind - Most
wind turbines generate electricity from naturally occurring wind. Solar updraft towers use wind that is artificially produced inside the chimney by heating it with sunlight, and are more properly seen as forms of solar thermal energy.
Small electricity generators are often powered by
reciprocating engines burning diesel, biogasor natural gas. Diesel enginesare often used for back up generation, usually at low voltages. Biogas is often combusted where it is produced, such as a landfill or wastewater treatment plant, with a reciprocating engine or a microturbine, which is a small gas turbine.
Main PhotovoltaicsUnlike the solar heat concentrators mentioned above, photovoltaic panels convert sunlight directly to electricity. Although sunlight is free and abundant, solar electricity is still usually more expensive to produce than large-scale mechanically generated power due to the cost of the panels. Low-efficiency silicon solar cells have been decreasing in cost though, and multijunction cells with close to 30% conversion efficiency are now commercially available. Over 40% efficiency has been demonstrated in experimental systems. [ [http://www.doe.gov/news/4503.htm "New World Record Achieved in Solar Cell Technology"] (press release,
2006-12-05), U.S. Department of Energy.] Until recently, photovoltaics were most commonly used in remote sites where there is no access to a commercial power grid, or as a supplemental electricity source for individual homes and businesses. Recent advances in manufacturing efficiency and photovoltaic technology, combined with subsidies driven by environmental concerns, have dramatically accelerated the deployment of solar panels. Installed capacity is growing by 40% per year led by increases in Germany, Japan, California and New Jersey.
Other generation methods
Various other technologies have been studied and developed for power generation. Solid-state generation (without moving parts) is of particular interest in portable applications. This area is largely dominated by thermoelectric (TE) devices, though thermionic (TI) and
thermophotovoltaic(TPV) systems have been developed as well. Typically, TE devices are used at lower temperatures than TI and TPV systems. Piezoelectricdevices are used for power generation from mechanical strain, particularly in power harvesting. Betavoltaicsare another type of solid-state power generator which produces electricity from radioactive decay.Fluid-based magnetohydrodynamic (MHD) power generation has been studied as a method for extracting electrical power from nuclear reactorsand also from more conventional fuel combustion systems.
Electrochemical electricity generation is also important in portable and mobile applications. Currently, most electrochemical power comes from closed electrochemical cells ("batteries") [ [http://www.eere.energy.gov/news/archive.cfm/pubDate=%7Bd%20'2003-09-24'%7D#6490 World's Largest Utility Battery System Installed in Alaska] (press release,
2003-09-24), U.S. Department of Energy. "13,670 nickel-cadmium battery cells to generate up to 40 megawatts of power for about 7 minutes, or 27 megawatts of power for 15 minutes."] , which are arguably utilized more as storage systems than generation systems, but open electrochemical systems, known as fuel cells, have been undergoing a great deal of research and development in the last few years. Fuel cells can be used to extract power either from natural fuels or from synthesized fuels (mainly electrolytic hydrogen) and so can be viewed as either generation systems or storage systems depending on their use.
In 2005, USA continued to remain as the top producer of electricity with a global share of at least 25% followed by China, Japan and Russia.
Emissions from electricity generation account for a signifcant portion of world greenhouse gas emissions; in the United States, electricity generation accounts for nearly 40 percent of emissions, the largest of any source.
Transportation emissions are close behind, contributing about one-third of U.S. production of carbon dioxide[http://seattletimes.nwsource.com/html/nationworld/2003732690_carbon03.html] .
Directive on Electricity Production from Renewable Energy Sources
Emissions & Generation Resource Integrated Database (eGRID)
List of countries by electricity production from renewable source
Electric power transmission
Environmental concerns with electricity generation
Eugene Green Energy Standard
Virtual power plant
World energy resources and consumption
* [http://www.nrel.gov/analysis/power_databook/ Power Technologies Energy Data Book]
* [http://www.electricitygeneration.co.uk Electricity Generation] -- Guide to various methods of electricity generation, including both renewable and conventional sources.
Wikimedia Foundation. 2010.
Look at other dictionaries:
Electricity Generation — The process of producing electricity by transforming other forms or sources of energy into electrical energy; measured in kilowatt hours … Energy terms
Electricity generation — The process of producing electric energy or the amount of electric energy produced by transforming other forms of energy, commonly expressed in kilowatthours(kWh) or megawatthours (MWh). U.S. Dept. of Energy, Energy Information Administration … Energy terms
Electricity generation, gross — See Gross generation. U.S. Dept. of Energy, Energy Information Administration s Energy Glossary … Energy terms
Electricity generation, net — See Net generation. U.S. Dept. of Energy, Energy Information Administration s Energy Glossary … Energy terms
Environmental concerns with electricity generation — Modern technology uses large amounts of electrical power. This is normally generated at power plants which convert some other kind of energy into electrical power. Each such system has advantages and disadvantages, but many of them pose… … Wikipedia
Offsite-produced energy for heat, power, and electricity generation — This measure of energy consumption, which is equivalent to purchased energy includes energy produced off site and consumed onsite. It excludes energy produced and consumed onsite, energy used as raw material input, and electricity losses. U.S … Energy terms
Standby electricity generation — Involves use of generators during times of high demand on utilities to avoid extra peak demand charges. U.S. Dept. of Energy, Energy Information Administration s Energy Glossary … Energy terms
Electricity — (from the Greek word ήλεκτρον, (elektron), meaning amber, and finally from New Latin ēlectricus , amber like ) is a general term that encompasses a variety of phenomena resulting from the presence and flow of electric charge. These include many… … Wikipedia
Electricity distribution — is the penultimate stage in the delivery (before retail) of electricity to end users. It is generally considered to include medium voltage (less than 50 kV) power lines, electrical substations and pole mounted transformers, low voltage (less than … Wikipedia
generation — gen‧e‧ra‧tion [ˌdʒenəˈreɪʆn] noun 1. [uncountable] MANUFACTURING the process of producing energy or power: • the generation of electricity 2. [uncountable] COMMERCE the process of producing or increasing income, profits, sa … Financial and business terms