Chloralkali process

The chloralkali process is an industrial process for the electrolysis of sodium chloride solution (brine). Depending on the method several products beside hydrogen can be produced. If the products are separated, chlorine and sodium hydroxide are the products; by mixing, sodium hypochlorite or sodium chlorate are produced, depending on the temperature. Higher temperatures are needed for the production of sodium chlorate instead of sodium hypochlorite. Industrial scale production began in 1892.

When using calcium chloride or potassium chloride, the products contain calcium or potassium instead of sodium.

The process has a high energy consumption, for example over 4 billion kWh per year in West Germany 1985, and produces equal (molar) amounts of chlorine and sodium hydroxide, which makes it necessary to find a use for the product for which there is less demand, usually the chlorine.



There are three production methods in use. While the mercury cell method produces chlorine-free sodium hydroxide, the use of several tonnes of mercury leads to serious environmental problems. In normal production cycle a few hundred pounds of mercury per year are emitted which accumulate in the environment. Additionally, the chlorine and sodium hydroxide produced via the mercury-cell chloralkali process are themselves contaminated with trace amounts of mercury. The membrane and diaphragm method use no mercury, but the sodium hydroxide contains chlorine which has to be removed.

Membrane cell

Basic membrane cell used in the electrolysis of brine.

The most common chlorlakali process involves the electrolysis of aqueous sodium chloride (a brine) in a membrane cell.

Saturated brine is passed into the first chamber of the cell where the chloride ions are oxidised at the anode to chlorine:

2ClCl2 + 2e

At the cathode, hydrogen in the water is reduced to hydrogen gas, releasing hydroxide ions into the solution:

2H2O + 2e → H2 + 2OH

The non-permeable ion exchange membrane at the center of the cell allows the sodium ions (Na+) to pass to the second chamber where they react with the hydroxide ions to produce caustic soda (NaOH). The overall reaction for the electrolysis of brine is thus:

2NaCl + 2H2OCl2 + H2 + 2NaOH

A membrane cell is used to prevent the reaction between the chlorine and hydroxide ions. If this reaction were to occur the chlorine would be disproportionated to form chloride and hypochlorite ions:

Cl2 + 2OH → Cl + ClO + H2O

Above about 60°C, chlorate can be formed:

3Cl2 + 6OH → 5Cl + ClO3 + 3H2O

Because of the corrosive nature of chlorine production, the anode has to be made from a non-reactive metal such as titanium, whereas the cathode can be made from Nickel.

In the membrane cell, the anode and cathode are separated by an ion-permeable membrane. Saturated brine is fed to the compartment with the anode (the anolyte). A DC current is passed through the cell and the NaCl splits into its constituent components. The membrane passes Na+ ions to the cathode compartment (catholyte), where it forms sodium hydroxide in solution. The membrane allows only positive ions to pass through to prevent the chlorine from mixing with the sodium hydroxide. The chloride ions are oxidised to chlorine gas at the anode, which is collected, purified and stored. Hydrogen gas and Hydroxide ions are formed at the cathode.

Diaphragm cell

In the diaphragm cell process, there are two compartments separated by a permeable diaphragm, often made of asbestos fibers. Brine is introduced into the anode compartment and flows into the cathode compartment. Similarly to the Membrane Cell, chloride ions are oxidized at the anode to produce chlorine, and at the cathode, water is split into caustic soda and hydrogen. The diaphragm prevents the reaction of the caustic soda with the chlorine. A diluted caustic brine leaves the cell. The caustic soda must usually be concentrated to 50% and the salt removed. This is done using an evaporative process with about three tonnes of steam per tonne of caustic soda. The salt separated from the caustic brine can be used to saturate diluted brine. The chlorine contains oxygen and must often be purified by liquefaction and evaporation.

Mercury cell

In the mercury-cell process, also known as the Castner-Kellner process, a saturated brine solution floats on top of the cathode which is a thin layer of mercury. Chlorine is produced at the anode, and sodium is produced at the cathode where it forms a sodium-mercury amalgam with the mercury. The amalgam is continuously drawn out of the cell and reacted with water which decomposes the amalgam into sodium hydroxide and mercury. The mercury is recycled into the electrolytic cell. Mercury cells are being phased out due to concerns about mercury poisoning from mercury cell pollution such as occurred in Canada (see Ontario Minamata disease) and Japan (see Minamata disease).

Manufacturer Associations

The interests of chloralkali product manufacturers are represented at regional, national and international levels by associations such as Euro Chlor and The World Chlorine Council.

Laboratory procedure

Electrolysis can be done with two beakers, one containing a brine and one containing pure water. A salt bridge can be made of a length of bent hose (a metal pipe should not be used) to connect the two beakers. Plug the ends with tissue or cloth. Put any electrode in the solution that you want to produce sodium hydroxide and hydrogen with. Put an electrode made from a carbon rod (or a pencil lead) into the solution that you want to produce the chlorine gas. If you want the hydrochloric and hypochlorous acid from the chlorine dissolution, put its electrode in the pure water solution. If you want the sodium hydroxide and hydrogen gas, put its electrode into the pure water solution. Connect the "any" electrode to the negative terminal of a 12 volt power supply.

See also


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Industrial process — Industrial processes are procedures involving chemical or mechanical steps to aid in the manufacture of an item or items, usually carried out on a very large scale.Industrial processes are the key components of heavy industry.Most processes make… …   Wikipedia

  • Castner–Kellner process — The Castner–Kellner process is a method of electrolysis on an aqueous alkali chloride solution (usually sodium chloride solution) to produce the corresponding alkali hydroxide,[1] invented by American Hamilton Castner and Austrian[2] Karl Kellner …   Wikipedia

  • Sodium hydroxide — Sodium hydroxide …   Wikipedia

  • Mercury (element) — gold ← mercury → thallium Cd ↑ Hg ↓ Cn …   Wikipedia

  • Iridium — (pronEng|ɪˈrɪdiəm) is a chemical element that has the symbol Ir and atomic number 77. A very hard, brittle, silvery white transition metal of the platinum family, iridium is the second densest element and is the most corrosion resistant metal,… …   Wikipedia

  • Ontario Minamata disease — is a neurological syndrome caused by severe mercury poisoning. It occurred in the Canadian province of Ontario in 1970 and severely affected two First Nation communities located in Northwestern Ontario following consumption of local fish that… …   Wikipedia

  • Alkali manufacture — This is a historical article. For current information see Sodium hydroxide#Manufacture and Chloralkali process. Alkali manufacture is the process by which an alkali is made. Typical alkalis, produced commercially, include sodium hydroxide, sodium …   Wikipedia

  • Ammonia — For other uses, see Ammonia (disambiguation). Ammonia …   Wikipedia

  • Electrolysis of water — is the decomposition of water (H2O) into oxygen (O2) and hydrogen gas (H2) due to an electric current being passed through the water. Simple setup for demonstration of electrolysis of water at home. Contents …   Wikipedia

  • Downs cell — The Downs process is an electrochemical method for the commercial preparation of metallic sodium, in which molten NaCl is electrolyzed in a special apparatus called the Downs cell.[1] How it works Schematic diagram of the Downs cell …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.