Contact patch is the portion of a vehicle's tire that is in actual contact with the road surface. It is most commonly used in the discussion of pneumatic tires, (i.e. pressurized tires), where the term is strictly used to describe the portion of the tire’s tread that touches the road surface. The term “footprint” is used almost synonymously.
The following discussion only applies to pneumatic tires.
Contact patch size
The contact patch is the only connection between the road and the vehicle. The size and shape of the contact patch as well as the pressure distribution within the contact patch are important to the ride qualities and handling characteristics of a vehicle. Since the wear characteristics of tires is a highly competitive area between tire manufacturers, a lot of the research done concerning the contact patch is considered highly proprietary and, therefore, very little is published on the subject.
Because pneumatic tires are flexible, the contact patch is different when the vehicle is in motion from when it is static. Because it is so much easier to make observations of the contact patch without the tire in motion, it is more common to conduct studies of the static contact patch.
Statically, the size, shape, and pressure distribution are functions of many things, the most important of which are the load on the tire and the inflation pressure:
- The larger the load on the tire, the larger the contact patch.
- The larger the inflation pressure, the smaller the contact patch.
Unfortunately, these two properties are not linearly proportional to the area of the contact. Put another way, a 10% change in load or inflation pressure usually does not result in a 10% change in the contact patch. This makes intuitive sense, because while you can alter the load or pressure freely, the contact patch size will always be limited by the tire geometry.
- Camber thrust
- Cornering force
- Frictional contact mechanics
- Ground pressure
- Pneumatic trail
- Slip (vehicle dynamics)
- ^ Summary Report: Evaluation of Tire Size and inflation Pressure on Tire Contact Stress and Pavement Response by Emmanuel Fernando, August 2006.
- ^ Summary: Inflation Pressure Retention Effects on Tire Rolling Resistance, Vehicle Fuel Economy and CO2 Emissions presented to the California Air Resources Board July 4, 2008 by Walter Waddell
Wikimedia Foundation. 2010.
Look at other dictionaries:
contact patch — the tire contact patch is the part of the tire that touches the road. On tall tires the contact patch is longer than wide. On short tires, the opposite is true … Mechanics glossary
contact patch — the area of contact between a tire on an automotive vehicle and the road surface. * * * … Universalium
contact patch — the area of contact between a tire on an automotive vehicle and the road surface … Useful english dictionary
contact patch — The area of a tire s tread that touches the ground … Dictionary of automotive terms
patch — contact patch … Mechanics glossary
patch —  To repair a component.  The added part used to repair a component, e.g., a rubber disc glued to a tube to cover a nail hole.  The footprint of a tire in its contact with the ground. See contact patch balance patch plug patch … Dictionary of automotive terms
Patch clamp — Pour les articles homonymes, voir Patch. Patch clamp est un terme anglais désignant une technique électrophysiologique d enregistrement des courants ioniques transitant à travers les membranes cellulaires. Cette technique consiste à mettre en… … Wikipédia en Français
Contact dermatitis — Classification and external resources Rash resulting from skin reactions. ICD 10 L … Wikipedia
Contact Energy — Type Public (NZX: CEN) Industry Electricity generation Electricity retailing … Wikipedia
patch test — n a test for determining allergic sensitivity that is made by applying to the unbroken skin small pads soaked with the allergen to be tested and that indicates sensitivity when irritation develops at the point of application compare INTRADERMAL… … Medical dictionary