Proctor compaction test
The Proctor compaction test and the related modified Proctor compaction test, named for engineer
Ralph R. Proctor(1933), are tests to determine the maximum practically-achievable density of soils and aggregates, and are frequently used in geotechnical engineering.
The test consists of compacting the soil or aggregate to be tested into a standard mold using a standardized compactive energy at several different levels of moisture content. The maximum dry density and optimum moisture content is determined from the results of the test.
Soil in place is tested for in-place dry bulk density, and the result is divided by the maximum dry density to obtain a "relative compaction" for the soil in place.
History and its origin
Proctor's fascination with geotechnical engineering began when taking his undergraduate studies at University of Berkeley California. He was interested in the publications of Sir
Alec Skemptonand his ideas on in situ behavior of natural clays. Skempton formulated concepts and porous water coefficients that are still widely used today. It was Proctor’s idea to take this concept a step further and formulate his own experimental conclusions to determine a solution for the in situ behaviors of clay and ground soils that cause it to be unsuitable for construction. His idea, which was later adopted and expounded upon by Skempton, involved the compaction of the soil to establish the maximum practically-achievable density of soils and aggregates (the "practically" stresses how the value is found experimentally and not theoretically).
In the early 1930s, he finally created a solution for determining the maximum density of soils. He found that in a controlled environment (or within a control volume), the soil could be compacted to the point where the air could be completely removed, simulating the effects of a soil in situ conditions. From this, the dry density could be determined by simply measuring the weight of the soil before and after compaction, calculating the moisture content, and furthermore calculating the dry density. Ralph R. Proctor went on to teach at the University of Arkansas.
Compaction is the process of increasing the
bulk densityof a soil or aggregate by driving out air. For any soil, for a given amount of compactive effort, the density obtained depends on the moisture content. At very high moisture contents, the maximum dry density is achieved when the soil is compacted to nearly saturation, where (almost) all the air is driven out. At low moisture contents, the soil particles interfere with each other; addition of some moisture will allow greater bulk densities, with a peak density where this effect begins to be counteracted by the saturation of the soil.
The original Proctor test, ASTM D698 / AASHTO T99, uses a 4-inch diameter mold which holds 1/30th cubic foot of soil, and calls for compaction of three separate lifts of soil using 25 blows by a 5.5 lb hammer falling 12 inches, for a compactive effort of 12,400 ft-lbf/ft³. The "Modified Proctor" test, ASTM D1557 / AASHTO T180, uses the same mold, but uses a 10 lb. hammer falling through 18 inches, with 25 blows on each of five lifts, for a compactive effort of about 56,000 ft-lbf/ft³. Both tests allow the use of a larger mold, 6 inches in diameter and holding 1/13.333 ft³, if the soil or aggregate contains too large a proportion of gravel-sized particles to allow repeatability with the 4-inch mold. To insure the same compactive effort, the number of blows per lift is increased to 56.
California Department of Transportationhas developed a similar test, California Test 216, which measures the maximum wet density, and controls the compactive effort based on the weight, not the volume, of the test sample. The primary advantage of this test is that maximum density test results are available sooner, as evaporation of the compacted sample is not necessary.
There is also a test (ASTM D4253) which uses a vibrating table using standard vibrations for a standard time to densify the soil. This test method prevents particle breakage, but is only usable for granular soils. The test method also includes a method to determine the "minimum" density of the soil; density of soils in place are compared against the maximum and minimum to obtain a "relative density".
Wikimedia Foundation. 2010.
Look at other dictionaries:
Proctor (disambiguation) — A Proctor is the name of certain important university officials. Proctor is also the title of an advocate in a court of admiralty.The Percival Proctor was a British radio trainer and communications aircraft of the Second World War, which remained … Wikipedia
Soil compaction — occurs when weight of livestock or heavy machinery compresses soil, causing it to lose pore space. Affected soils become less able to absorb rainfall, thus increasing runoff and erosion. Plants have difficulty in compacted soil because the… … Wikipedia
Cone penetration test — A CPT truck operated by the USGS. The cone penetration test (CPT) is an in situ testing method used to determine the geotechnical engineering properties of soils and delineating soil stratigraphy. It was initially developed in the 1950s at the… … Wikipedia
Essai proctor — L essai Proctor, de l ingénieur Ralph R. Proctor (1933) est un essai qui permet de déterminer la densité maximale du sol et des granulats analysés. Il est fréquemment utilisé en ingénierie géotechnique et en laboratoire d analyse de sol. L essai… … Wikipédia en Français
Essai Proctor — L essai Proctor, de l ingénieur Ralph R. Proctor (1933) est un essai qui permet de déterminer la densité maximale du sol et des granulats analysés. Il est fréquemment utilisé en ingénierie géotechnique et en laboratoire d analyse de sol. Sommaire … Wikipédia en Français
Ralph R. Proctor — Ralph Roscoe Proctor (* 16. Dezember 1894 in Grayslake; † 12. Oktober 1962) war ein US amerikanischer Bauingenieur, bekannt als Erfinder des Proctor Versuchs. Proctor war nach zwei Jahren Studium des Bauingenieurwesens an der University of… … Deutsch Wikipedia
Porosity — or void fraction is a measure of the void (i.e., empty ) spaces in a material, and is a fraction of the volume of voids over the total volume, between 0–1, or as a percentage between 0–100%. The term is used in multiple fields including… … Wikipedia
Consolidation (soil) — Consolidation is a process by which soils decrease in volume. According to Karl Terzaghi consolidation is any process which involves decrease in water content of a saturated soil without replacement of water by air.  In general… … Wikipedia
Hydrometer — Not to be confused with Hygrometer. Hydrometer from Practical Physics Schematic drawing of a hydrometer. The lower the densi … Wikipedia
Angle of repose — For the Wallace Stegner novel, see Angle of Repose (novel). For the friction angle between two solid objects, see Friction. For the Sleepytime Gorilla Museum song of the same name, see In Glorious Times. Angle of repose The angle of repose or,… … Wikipedia