Navistar DT engine
Navistar DT engine Production 1984-present Configuration Inline-6 Displacement 360-570 cubic inches Cylinder bore 4.59 inches Fuel type Diesel Power output 170-350hp
The Navistar DT engine family is a line of mid-range inline-6 diesel engines. With horsepower ratings ranging from 170 hp (130 kW) to 350 hp (260 kW), the Navistar DT engines are used primarily in medium-duty truck and bus applications, although some versions have been developed for heavy-duty regional-haul and severe-service applications. Prior to 1986 Navistar International, then known as International Harvester Company, used the DT engine in farm and construction equipment.
The DT engines are of a wet-sleeve design. This means that the cylinder wall (sleeve) is a separately machined part that fits into the cylinder bores cast into the engine block. The cylinder sleeve is in contact with the engine coolant, hence the "wet"-sleeve.
Navistar claims that the wet-sleeve design enhances durability because the consistent wall thickness of the sleeve allows for consistent heat transfer, ensuring the cylinders stay round during thermal expansion. Additionally, they state that the hardened cylinder sleeve is more durable and wear resistant than a softer, cast-in wall. Also, the replaceable cylinder sleeves protect the block from damage (e.g. in case of foreign objects entering the cylinder) and can easily be replaced, which Navistar claims enables simpler restoration to original specifications. The wet-sleeve design also allows the engine to be rebuilt easily to factory specifications, sometimes without even removing the engine from the vehicle.
This design is opposed to parent bore engines, where the cylinder walls are machined out of the bores cast into the block. International states that the uneven thickness of the cylinder walls causes the cylinders to become out of round during thermal expansion, increasing wear. Also, damage to the cylinder wall requires more extensive work to repair.
From 1984 until late 1995, the DT engines used a Bosch pump-line-nozzle (PLN) mechanical direct fuel injection system. 1984 through 1992 DTs used a Bosch MW style pump, while the 1993-1995s used a Bosch P style pump, and starting what was called New Generation Diesel engine design, which is still the same basic block design. Mechanical injection was still utilized in trucks up into the 1997 year, but this is rare. In 1994, due to tightening emissions regulations, the engines were redesigned to use electronically controlled unit direct fuel injection. From 1994 to 2004, the engines used HEUI (Hydraulically actuated Electronically controlled Unit Injection) injectors, co-developed by Navistar and Caterpillar.  From 2004 to 2009, the engines use International's Electro-Hydraulic Generation Two (G2) unit injectors.
The Navistar DT engines are currently available in three configurations. These have been updated to comply with the United States Environmental Protection Agency's 2007 emissions regulations. These variants have been renamed to conform to International's new MaxxForce engine brand.
- MaxxForce DT: 7.6 L (466 cu in) displacement, bore x stroke 4.59 x 4.68 in (116.5 x 118.9 mm); with horsepower ratings from 210–300 hp (160–220 kW). The MaxxForce DT is available in standard and high torque configurations, which provide extra torque. 
- MaxxForce 9: 9.3 L (570 cu in) displacement, bore x stroke 4.59 x 5.75 in. (116.5 x 146.1 mm); with horsepower ranging from 300–330 hp (220–250 kW). This engine is similar to the MaxxForce DT, but the piston stroke is increased to raise displacement to 9.3 liters. 
- MaxxForce 10: Same displacement as MaxxForce 9, with horsepower ranging from 310–350 hp (230–260 kW). This engine features stronger components, such as steel-crowned two-piece pistons, strengthened engine block, and a titanium turbocharger turbine to cope with the extra power and stress of severe-service and heavy-duty applications. 
The engines are also available for defense applications under the MaxxForce D brand. The MaxxForce DT is known as the MaxxForce D7.6I6, and the MaxxForce 10 is known as the MaxxForce D9.3I6. Modifications from the civilian versions include diamond-coated injectors to enable the engines to run on JP-8 fuel.
The DT engine has also historically been available in the following variants; these have all been discontinued.
- 530E (8.7L); available in standard and high-torque configurations. Replaced in 2004 by DT/HT 570, which were replaced in 2007 by the MaxxForce 9 and 10, respectively. Used electro-hydraulic unit injection.
- DT 466E: Introduced in 1994, added electronic control to previous, non-electronic DT 466, superseded by model year 2005-and-later DT 466 with variable geometry turbocharger (see below). Also changed over from mechanical fuel injection to electro-hydraulic unit injection.
- DT 408 (6.7L): a smaller version of the DT family. Used mechanical fuel injection.
- DT 360 (5.9L): a still-smaller variant. Also used mechanical injection.
- DTA 360: Same as above, but with an aftercooler, the "A" stands for "aftercooled".
- DTA 466: Same as earlier mechanical-injection DT 466, but with an aftercooler.
- Turbo 400 engine: version used in IH farm and construction equipment, with many different sizes.
In 2004, the entire DT family of engines was updated to meet 2004 emissions standards set out by the United States Environmental Protection Agency. Changes to the engines included a new turbocharger (called EVRT, for "Electronic Variable Response Turbocharger") with movable turbo vanes to improve boost and reduce lag, a new, electronically controlled hydraulic unit fuel injection system, cooled Exhaust Gas Recirculation to reduce emissions, and new four-valve cylinder heads. 
In 2007, the DT engines were updated once again to comply with stricter 2007 emissions standards. The DT 466, DT 570, and HT 570 engines will be renamed MaxxForce DT, MaxxForce 9, and MaxxForce 10, respectively. New features include closed-crankcase ventilation and new wiring harnesses. The MaxxForce engines are available in model year 2008 International trucks and IC Corporation school buses.
In 2010 the DT engines will be updated once again for compliance with the forthcoming 2010 emissions standards. They will all receive new, twin turbochargers, with higher-rated versions of the MaxxForce DT and all MaxxForce 9 and 10 engines receiving intercooling and aftercooling. Upgrades to fuel injectors, the EGR system, and cooling are also part of the 2010 modifications.
- International CXT (DT 466/MaxxForce DT)
- International 8500 (HT 570)
- International 7300, 7400, 7500 (DT 466, DT 570, HT 570)
- International 4300, 4400 (DT 466/MaxxForce DT, DT 570/MaxxForce 9)
- International MaxxPro
- IC Corporation FE 300 (DT 466/MaxxForce DT)
- IC Corporation RE 300 (DT 466/MaxxForce DT, DT 570/MaxxForce 9)
- IC Corporation CE 300 (DT 466/MaxxForce DT)
- Navistar VT engine
- Navistar T444E engine
- Navistar International Corporation
- List of Navistar engines
International Truck product line Military vehicles Commercial Vehicles Trucks Bus Chassis Current Discontinued
3000 • 3200 • 3300
S-Series "Schoolmaster" • 1853FC • 3600 • 3800 • 3900
OtherList of International Harvester vehicles
List of International Harvester/Navistar engines
(to 1986)345 V8 • 392 V8 • MV 404 • MV 446
Diesel enginesList of International Harvester/Navistar engines
Wikimedia Foundation. 2010.
Look at other dictionaries:
Navistar T444E engine — Navistar T444E Manufacturer Navistar International Also called Ford PowerStroke diesel Production 1994 2003 Predecessor International Harvester IDI Successor Navistar VT365 Ford 6.0L PowerStroke V8 … Wikipedia
Navistar VT engine — International VT365 Manufacturer International Truck and Engine Corp., a Division of Navistar International Corporation Also called Power Stroke Production 2003–2006 Predecessor International T444E Successor 6.4 L Ford V8 … Wikipedia
Navistar International — Corporation Type Public NYSE: NAV … Wikipedia
Navistar 7000 series — A parked 7000 MV 4 1/2 ton cargo truck Type Medium Truck Place of origin … Wikipedia
Mahindra Navistar — Automotives Ltd Type Private Industry Automotive Founded … Wikipedia
Ford Power Stroke engine — Infobox Automobile engine name=Ford Power Stroke engine aka=International Truck and Engine Corporation manufacturer=Navistar Inc. production=1994 ndash; class=OHV 90° V8 Diesel predecessor= similar=Duramax V8 B series I6Introduced in mid 1994… … Wikipedia
Ford 335 engine — Ford 335 V8 Manufacturer Ford Motor Company Also called Ford Cleveland V8 Production 1970–1985 … Wikipedia
Cummins B Series engine — Cummins B Series Manufacturer Cummins Also called ISB Production 1984–present Configuration I4 and I6 diesel engines Fuel type Diesel O … Wikipedia
Straight-6 — The straight 6 or inline 6 engine (often abbreviated I6 or L6) is a six cylinder internal combustion engine with all six cylinders mounted in a straight line along the crankcase. The single bank of cylinders may be oriented in either a vertical… … Wikipedia
International Harvester — For the song by Craig Morgan, see International Harvester (song). For the Swedish progg band, see Träd, Gräs Stenar. International Harvester Company Industry Agricultural, Automotive Successor Navistar International Corporation … Wikipedia