High-intensity discharge lamp
A High-intensity discharge (HID) lamp is a type of electrical lamp which produces light by means of an electric arc between
tungsten electrodes housed inside a translucent or transparent fused quartzor fused aluminatube. This tube is filled with both gasand metalsalts. The gas facilitates the arc's initial strike. Once the arc is started, it heats and evaporates the metal salts forming a plasma, which greatly increases the intensity of light produced by the arc and reduces its power consumption. High-intensity discharge lamps are a type of arc lamp.
Compared with fluorescent and incandescent lamps, HID lamps have higher
luminous efficacysince a greater proportion of their radiation is in visible light as opposed to heat.Their overall luminous efficacy is also much higher: they give a greater amount of light output per watt of electricity input.
Various different types of chemistry are used in the arc tubes of HID lamps, depending on the desired characteristics of light intensity, correlated color temperature,
color rendering index(CRI), energy efficiency, and lifespan. Varieties of HID lamp include:
The light-producing element of these lamp types is a well-stabilized arc discharge contained within a refractory envelope (
arc tube) with wall loading in excess of 3 W/cm² (19.4 W/in²).
Mercury vapor lamps were the first commercially available HID lamps. Originally they produced a bluish-green light, but more recent versions can produce light with a less pronounced color tint. However, mercury vapor lamps are falling out of favor and being replaced by sodium vapor and metal halide lamps.
Metal halide and ceramic metal halide lamps can be made to give off neutral white light useful for applications where normal color appearance is critical, such as TV and movie production, indoor or nighttime sports games, automotive headlamps, and aquarium lighting.
Low-pressure sodium vapor lamps are extremely efficient. They produce a deep yellow-orange light and have an effective CRI of nearly zero; items viewed under their light appear monochromatic. This makes them particularly effective as photographic
safe lights. High-pressure sodium lamps tend to produce a much whiter light, but still with a characteristic orange-pink cast. New color-corrected versions producing a whiter light are now available, but some efficiency is sacrificed for the improved color.
Electronic control gear
Like fluorescent lamps, HID lamps require a ballast to start and maintain their arcs. The method used to initially strike the arc varies: mercury vapor lamps and some metal halide lamps are usually started using a third electrode near one of the main electrodes while other lamp styles are usually started using pulses of high voltage.
HID lamps are typically used when high levels of light over large areas are required, and when energy efficiency and/or light intensity are desired. These areas include
gymnasiums, large public areas, warehouses, movie theaters, football stadiums [ [http://catalogue.ausport.gov.au/fulltext/1998/wa/fo_outdoor_lighting.pdf Focus on Outdoor Lighting, page 4] ] , outdoor activity areas, roadways, parking lots, and pathways. More recently, HID lamps, especially metal halide, have been used in small retail and residential environments. HID lamps have made indoor gardening practical, particularly for plants that require a good deal of high intensity sunlight; HID lamps are a common choice of light source for marijuanagrowing operations. They are also used to reproduce tropical intensity sunlight for indoor aquariums.
Most HID lamps produce significant
UV radiation, and require UV-blocking filters to prevent UV-induced degradation of lamp fixture components, fading of dyed items illuminated by the lamp. Exposure to HID lamps operating with faulty or absent UV-blocking filters causes injury to humans and animals, such as sunburnand arc eye. Many HID lamps are designed so as to quickly extinguish if their outer UV-shielding glass envelope is broken.
Beginning in the early 1990s, HID lamps have been employed in motor vehicle headlamps. This application has met with mixed responses from motorists, who appreciate the improved nighttime visibility from HID headlamps but object to the glare they can cause. Internationalized European vehicle regulations require such headlamps to be equipped with lens cleaners and an automatic self-leveling system to keep the beams aimed correctly regardless of vehicle load and attitude, but no such devices are required in North America, where inherently more glaring beam patterns are also permitted. Retrofitting HID bulbs in headlamps not originally designed to accept them results in extremely high levels of glare, and is illegal throughout most of the world. [ [http://www.danielsternlighting.com/tech/bulbs/Hid/conversions/conversions.html Headlamp HID kits — technical and legal factors] ]
HID lamps are used in high-performance bicycle headlamps as well as
flashlights and other portable lights, because presently they produce the greatest amount of light per unit of electricity. As the HID lights use less than half the power of an equivalent tungsten-halogen light, a significantly smaller and lighter-weight power supply can be used.
HID lamps are also used on many general aviation aircraft for landing and taxi lights.
End of life
At the end of life, many types of high-intensity discharge lamps exhibit a phenomenon known as "cycling". These lamps can be started at a relatively low
voltage. As they heat up during operation, however, the internal gas pressure within the arc tube rises and a higher voltage is required to maintain the arc discharge. As a lamp gets older, the voltage necessary to maintain the arc eventually rises to exceed the voltage provided by the electrical ballast. As the lamp heats to this point, the arc fails and the lamp goes out. Eventually, with the arc extinguished, the lamp cools down again, the gas pressure in the arc tube is reduced, and the ballast can once again cause the arc to strike. The effect of this is that the lamp glows for a while and then goes out, repeatedly.
More sophisticated ballast designs detect cycling and give up attempting to start the lamp after a few cycles. If power is removed and reapplied, the ballast will make a new series of startup attempts.
Hydrargyrum medium-arc iodidelamp
List of light sources
first = John | last = Waymouth | year = 1971
title = Electric Discharge Lamps | publisher = The M.I.T. Press
location = Cambridge, MA | id = ISBN 0-262-23048-8
author=National Highway Traffic Safety Administration
title=Glare from headlamps and other front mounted lamps
work=Federal Motor Vehicle Safety Standard No. 108
publisher=US Department of Transportation
Wikimedia Foundation. 2010.
Look at other dictionaries:
High-Intensity Discharge Lamp — A lamp that consists of a sealed arc tube inside a glass envelope, or outer jacket. The inner arc tube is filled with elements that emit light when ionized by electric current. A ballast is required to provide the proper starting voltage and to … Energy terms
High Intensity Discharge — Gasentladungslampen sind Lichtquellen, die zur Lichterzeugung eine Gasentladung verwenden und dabei die spontane Emission durch atomare oder molekulare elektronische Übergänge und die Rekombinationsstrahlung eines durch elektrische Entladung… … Deutsch Wikipedia
High-intensity discharge (HID) lamp — A lamp that produces light by passing electricity through gas, which causes the gas to glow. Examples of HID lamps are mercury vapor lamps, metal halide lamps, and high pressure sodium lamps. HID lamps have extremely long life and emit far more … Energy terms
High-Pressure Sodium Lamp — A type of High Intensity Discharge (HID) lamp that uses sodium under high pressure as the primary light producing element. These high efficiency lights produce a golden white color and are used for interior industrial applications, such as in… … Energy terms
Gas-discharge lamp — See also: Gas filled tube Germicidal lamps are simple low pressure mercury vapor discharges in a fused quartz envelope. Gas discharge lamps are a family of artificial light sources that generate light by sending an electrical discharge through an … Wikipedia
High efficiency ballast — A lighting conservation feature consisting of an energy efficient version of a conventional electromagnetic ballast. The ballast is the transformer for fluorescent and high intensity discharge (HID) lamps, which provides the necessary current,… … Energy terms
lamp — lampless, adj. /lamp/, n. 1. any of various devices furnishing artificial light, as by electricity or gas. Cf. fluorescent lamp, incandescent lamp. 2. a container for an inflammable liquid, as oil, which is burned at a wick as a means of… … Universalium
Lamp (electrical component) — A lamp is a replaceable component such as an incandescent light bulb, which is designed to produce light from electricity. These components usually have a base of ceramic, metal, glass or plastic, which makes an electrical connection in the… … Wikipedia
lamp — Synonyms and related words: Chinese lantern, Finsen light, Moore light, arc light, battery lamp, broadside, candle, candlelight, cresset, dark lantern, electric candle, electric lamp, electric light bulb, electric torch, electric arc lamp,… … Moby Thesaurus
Hydrargyrum medium-arc iodide lamp — Hydrargyrum medium arc iodide, or HMI, is a mercury halide gas discharge medium arc length lamp with a multi line spectra emission. The name implies that hydrargyrum, an archaic term for Mercury (Hg), is held as a vapour mixed with other rare… … Wikipedia