Terminate and Stay Resident

Terminate and Stay Resident (TSR) is a computer system call in DOS computer operating systems that returns control to the system as if the program has quit, but keeps the program in memory. Many software vendors use the call to create the appearance of multitasking, by transferring control back to the terminated program on automatic or externally-generated events, such as pressing a certain key on the keyboard. Some TSR programs are effectively device drivers for hardware not directly supported by the operating system, while others are small utility programs offering frequently-used functionality such as scheduling and contact directories.

Contents

Brief history

Normally in the MS-DOS operating system, only one program can be running at any given time, and when it wants to stop running, it relinquishes the control to DOS's shell program, COMMAND.COM, using the system call INT 21H/4CH.[1] The memory and system resources used by the program are marked as unused, effectively making it impossible to summon parts of it again without reloading it from scratch. However, if a program ends with the system call INT 27H or INT 21H/31H, the operating system does not reuse a certain specified part of the program's memory.

Using TSR

The original call, INT 27H, is called 'terminate but stay resident', hence the name 'TSR'. Using this call, a program can make up to 64KB of its memory resident. MS-DOS version 2.0 introduced an improved call, INT 21H/function 31H ('Keep Process'), which removed this limitation and let the program return an exit code. Before making this call, the program can install one or several interrupt handlers pointing into itself, so that it can be called again. Installing a hardware interrupt vector allows such a program to react to hardware events. Installing a software interrupt vector allows it to be called by the currently running program. Installing a timer interrupt handler allows a TSR to run periodically (see ISA and programmable interval timer, especially the section "IBM PC compatible").

The typical method of utilizing an interrupt vector involves reading its present value (the address), storing it within the memory space of the TSR, and installing a pointer to its own code. The stored address is called after the TSR has received the interrupt and has finished its processing, in effect forming a singly linked list of interrupt handlers, also called interrupt service routines, or ISRs. This procedure of installing ISRs is called chaining or hooking an interrupt or an interrupt vector.

By chaining the interrupt vectors TSR programs could take complete control of the computer. A TSR could have one of two behaviors:

  • Take complete control of an interrupt by not calling other TSRs that had previously altered the same interrupt vector.
  • Cascade with other TSRs by calling the old interrupt vector. This could be done before or after they executed their actual code. This way TSRs could form a chain of programs where each one calls the next one.

The 'terminate and stay resident' method was used by most MS-DOS viruses which could either take control of the PC or stay in the background. Viruses would react to disk I/O or execution events by infecting executable (.EXE or .COM) files when they were run and data files when they were opened.

Parts of DOS itself, especially in DOS versions 5.0 and later, used this same technique to perform useful functions, such as the DOSKEY command-line editor and various other installable utilities which were installed by running them at the command line (manually or from AUTOEXEC.BAT) rather than as drivers through CONFIG.SYS.

A TSR program can be loaded at any time; sometimes, they are loaded immediately after the operating system's boot, by being explicitly loaded in the AUTOEXEC.BAT batch program, or alternatively at the user's request (for example, Borland's SideKick and Turbo Debugger or Quicken's QuickPay). These programs will, as 'TSR' implies, stay resident in memory while other programs are executing. Most of them[verification needed] do not have an option for unloading themselves from memory, so calling TSR means the program will remain in memory until a reboot. However unloading is possible externally, using utilities like the MARK.EXE/RELEASE.EXE combo by TurboPower Software or soft reboot TSRs which will catch a specific key combination and release all TSRs loaded after them. As the chain of ISRs is singly linked, there is no provision for discovering the previous handler's address, or to inform its predecessor that it needs to update its "next address to which to jump" not to point to the TSR which desires to remove itself. This gave rise to TSR cooperation frameworks such as TesSeRact and AMIS.[2]

Interrupts sharing

To manage problems with many TSR programs sharing the same interrupt, a method called Alternate Multiplex Interrupt Specification (AMIS) was proposed by Ralf Brown as an improvement over previously used services offered via INT 2Fh. AMIS provides ways to share software interrupts in a controlled manner. It is modeled after IBM's Interrupt Sharing Protocol, originally invented for sharing hardware interrupts of an x86 processor.

AMIS services are available via Int 2Dh [2] (see Ralf Brown's Interrupt List).

The proposal never gained a widespread traction among programmers in its days. It existed alongside several other competing specifications of varying sophistication [3].

Faults

While very useful, or even essential to overcome DOS's limitations, TSR programs had a reputation as troublemakers. Many of the programs effectively hijacked the operating system in varying, documented or undocumented ways, often causing systems to crash on their activation or deactivation when used with particular application programs or other TSRs. As explained above, some viruses were coded as TSRs, and were deliberately troublesome. Additionally, all program code in DOS systems, even those with large amounts of physical RAM, had to be loaded into the first 640 KB of RAM (the conventional memory). TSRs were no exception, and took chunks from that 640 KB that were thus unavailable to application programs. This meant that writing a TSR was a challenge of achieving the smallest possible size for it, and checking it for compatibility with a lot of software products from different vendors—often a very frustrating task.

In the late 1980s and early 1990s, many video games on the PC platform pushed up against this limit and left less and less space for TSRs—even essential ones like CD-ROM drivers—and arranging things so that there was enough free RAM to run the games, while keeping the necessary TSRs present, became a black art. Many gamers had several boot disks with different configurations for different games. In latter versions of MS-DOS "boot menu" scripts allowed various configurations to be selectable via a single "boot disk". In the mid- to later 1990s, while many games were still written for DOS, the 640K limit was eventually overcome by putting parts of the game's data and/or program code above the first 1 MB of memory and using the code below 640K to access the extended memory (using extra-DOSian methods), with code being swapped into the lowest 1 MB of RAM as overlays. Because programming with many overlays is a challenge in and of itself, once the program was too big to fit entirely into about 512 KB, use of extended memory was almost always done using a third-party DOS extender implementing VCPI or DPMI, because it becomes much easier and faster to access memory above the 1 MB boundary, and possible to run code in that area, when the x86 processor is switched from real mode to protected mode. However, since DOS and all DOS programs run in real mode (VCPI or DPMI makes a protected mode program look like a real mode program to DOS and the rest of the system by switching back and forth between the two modes), DOS TSRs and device drivers also run in real mode, and so any time one gets control, the "DOS extender" has to switch back to real mode until it relinquishes control, incurring a time penalty.

Return

With the arrival of expanded memory boards and especially of Intel 80386 processors in the second half of the 1980s, it became possible to use memory above 640 KB to load TSRs. This required complex software solutions, named expanded memory managers, but provided some additional breathing room for several years. Famous memory managers are QRAM and QEMM by Quarterdeck, 386Max by Qualitas, CEMM by Compaq and later EMM386 by Microsoft. The memory areas usable for loading TSRs above 640 KB are called "upper memory blocks" (UMBs) and loading programs into them is called loading high. Later, memory managers started including programs which would try to automatically determine how to best allocate TSRs between low and high memory (Quarterdeck's Optimize or Microsoft's MemMaker) in order to try to maximize the available space in the first 640 KB.

Decline

With the development of games using DOS extenders (a notable early example was Doom) which bypassed the 640 KB barrier, many of the issues relating to TSRs disappeared, and with the widespread adoption of Microsoft Windows and especially Windows 95 (followed by Windows 98) — which rendered most TSRs unnecessary and some TSRs incompatible — the TSR faded into the obsolescence, though Win16 applications could do TSR-like tricks such as patching the IDT because real-mode Windows allowed it. The TSR has now almost disappeared completely, as multitasking operating systems such as Windows XP, Windows Vista, Mac OS X, and Linux provide the facilities for multiple programs and device drivers to run simultaneously without the need for special programming tricks, and the modern notion of protected memory makes the kernel and its modules exclusively responsible for modifying an interrupt table.

See also

External links

References

  1. ^ [1] HelpPC reference: INT 21,0 - Program Terminate
  2. ^ a list of TSR libraries also known as frameworks.

Wikimedia Foundation. 2010.

Look at other dictionaries:

  • terminate and stay resident — see ↑TSR • • • Main Entry: ↑terminate …   Useful english dictionary

  • Terminate and Stay Resident — Terminate and Stay Resident,   TSR Programm …   Universal-Lexikon

  • Terminate and Stay Resident — Die Abkürzung TSR stammt aus dem DOS Umfeld und steht für „Terminate and Stay Resident“. Dieses Konzept wurde als Vorläufer zu späteren Multitaskinganwendungen entwickelt, damit bestimmte Aufgaben (Uhr, Treiber, Systemdienste) permanent im… …   Deutsch Wikipedia

  • Terminate and Stay Resident — program located in a computer s memory and which may be activated by pressing a combination of keys, TSR …   English contemporary dictionary

  • terminate and stay resident program — rezidentinė programa statusas T sritis informatika apibrėžtis Programa, kuri lieka ↑operatyviojoje atmintyje ir po to, kai su ja baigiamas darbas. Gali būti paleista veikiant kitai programai, kada reikia atlikti kokį nors pagalbinį veiksmą,… …   Enciklopedinis kompiuterijos žodynas

  • terminate-and-stay-resident program —    Abbreviated TSR. A small accessory or utility program that stays loaded in memory, even when it is not actually running. A TSR can be invoked quickly to perform a specific task. TSR s are often used with single tasking operating systems such… …   Dictionary of networking

  • resident program — rezidentinė programa statusas T sritis informatika apibrėžtis Programa, kuri lieka ↑operatyviojoje atmintyje ir po to, kai su ja baigiamas darbas. Gali būti paleista veikiant kitai programai, kada reikia atlikti kokį nors pagalbinį veiksmą,… …   Enciklopedinis kompiuterijos žodynas

  • List of computing and IT abbreviations — This is a list of computing and IT acronyms and abbreviations. Contents: 0–9 A B C D E F G H I J K L M N O P Q R S T U V W X Y …   Wikipedia

  • HISTORICAL SURVEY: THE STATE AND ITS ANTECEDENTS (1880–2006) — Introduction It took the new Jewish nation about 70 years to emerge as the State of Israel. The immediate stimulus that initiated the modern return to Zion was the disappointment, in the last quarter of the 19th century, of the expectation that… …   Encyclopedia of Judaism

  • Characters in the Resident Evil films — This is a list of characters characters introduced in the Resident Evil film series. The original Resident Evil was not based on any particular game in the series and the cast was composed entirely of original characters made for the film. The… …   Wikipedia


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.