Stationary steam engine

A stationary steam engine, preserved at Tower Bridge in London. This is one of two tandem cross-compound hydraulic pumping engines formerly used to raise and lower the bridge.

Stationary steam engines are fixed steam engines used for pumping or driving mills and factories, and for power generation. They are distinct from locomotive engines used on railways, traction engines for heavy steam haulage on roads, steam cars (and other motor vehicles), agricultural engines used for ploughing or threshing, and marine engines.

They were introduced during the 18th century and widely made for the whole of the 19th century and most of the first half of the 20th century, only declining as electricity supply and the internal combustion engine became more widespread.

Contents

Types of stationary steam engine

Double-acting stationary steam engine. The piston is on the left, the crank is mounted on the flywheel axle on the right.
Mill engine, Queen Street Mill, Burnley. William Roberts horizontal tandem compound engine - 'Peace'.

There are different patterns of stationary steam engines, distinguished by the layout of the cylinders and crankshaft:

  • Beam engines have a rocking beam providing the connection between the vertical cylinder and crankshaft.
  • Table engines have the crosshead above the vertical cylinder and the crankshaft below.
  • Horizontal engines have a horizontal cylinder.
  • Vertical engines have a vertical cylinder.
  • Inclined engines have an inclined cylinder.

Stationary engines may be classified by secondary characteristics as well:

  • High speed engines are distinguished by fast-acting valves.
  • Corliss engines are distinguished by special rotary valve gear.
  • Uniflow engines have admission valves at the cylinder heads and exhaust ports at the midpoint.

When stationary engines had multiple cylinders, they could be classified as:

  • Simple engines, with multiple identical cylinders operating on a common crankshaft.
  • Compound engines which use the exhaust from high-pressure cylinders to power low-pressure cylinders.

An engine could be run in simple or condensing mode:

  • Simple mode meant the exhaust gas left the cylinder and passed straight into the atmosphere
  • In condensing mode, the steam was cooled in a separate cylinder, and changed from vapour to liquid water, creating a vacuum that assisted with the motion. This could be done with a water-cooled plate that acted as a heat sink, or pumping-in a spray of water.

In order of evolution:

[1]

Stationary engines may also be classified by their application:

Stationary engines could be classified by the manufacturer

  • Boulton & Watt
  • George Saxon & Co

See also

References

Bibliography

Vol 1, Yorkshire (2000)
Vol 2, Scotland and Northern England (2000)
Vols 3:1, 3:2, Lancashire (2001)
Vol 4, Wales, Cheshire,& Shropshire (2002)
Vol 5, The North Midlands (2002)
Vol 6, The South Midlands (2003)
Vol 7, The South and South West (2003)
Vol 8, Greater London and the South East (2003)
Vol 9, East Anglia & adjacent counties (2004)
Vol 10, Marine Engines (and readers' notes, indexes to the series etc) (2005)

This series reproduces some 1,500 images from the Steam Engine Record made by George Watkins between 1930 and 1980, which is now in the Watkins Collection at English Heritage's National Monuments Record at Swindon, Wilts.

External links


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Steam engine — Steam en gine ([e^]n j[i^]n). An engine moved by steam. [1913 Webster] Note: In its most common forms its essential parts are a piston, a cylinder, and a valve gear. The piston works in the cylinder, to which steam is admitted by the action of… …   The Collaborative International Dictionary of English

  • Steam engine — A steam engine is a heat engine that performs mechanical work using steam as its working fluid. [ [http://www.britannica.com/EBchecked/topic/564472/steam engine steam engine Britannica Online Encyclopedia ] ] Steam engines have a long history,… …   Wikipedia

  • steam engine — steam engine, adj. an engine worked by steam, typically one in which a sliding piston in a cylinder is moved by the expansive action of the steam generated in a boiler. [1745 55] * * * Machine that uses steam power to perform mechanical work… …   Universalium

  • Portable steam engine — Steam engine Steam en gine ([e^]n j[i^]n). An engine moved by steam. [1913 Webster] Note: In its most common forms its essential parts are a piston, a cylinder, and a valve gear. The piston works in the cylinder, to which steam is admitted by the …   The Collaborative International Dictionary of English

  • Semiportable steam engine — Steam engine Steam en gine ([e^]n j[i^]n). An engine moved by steam. [1913 Webster] Note: In its most common forms its essential parts are a piston, a cylinder, and a valve gear. The piston works in the cylinder, to which steam is admitted by the …   The Collaborative International Dictionary of English

  • Corliss steam engine — A Corliss steam engine – the valve gear is on the right of the cylinder block, on the left of the picture A Corliss steam engine (or Corliss engine) is a steam engine, fitted with rotary valves and with variable valve timing patented in 1849 …   Wikipedia

  • Model steam engine — Stationary model steam engine by Märklin, 1915 …   Wikipedia

  • Newcomen steam engine — Animation of a schematic Newcomen steam engine. – Steam is shown pink and water is blue. – Valves move from open (green) to closed (red) The atmospheric engine invented by Thomas Newcomen in 1712, today referred to as a Newcomen steam engine (or… …   Wikipedia

  • Fireman (steam engine) — A boilerman, sometimes called a fireman or stoker Fireman or stoker is the job title for someone whose job is to tend the fire for the running of a steam engine. On steam locomotives the term fireman is usually used, while on steamships and… …   Wikipedia

  • Uniflow steam engine — The uniflow type of steam engine uses steam that flows in one direction only in each half of the cylinder. Thermal efficiency is increased in the compound and multiple expansion types of steam engine by separating expansion into steps in separate …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.