- Centimetre gram second system of units
The

**centimetre-gram-second system**(**CGS**) is a system of physical units. It is always the same for mechanical units, but there are several variants of electric additions. It was replaced by the MKS, ormetre -kilogram -second system, which in turn was replaced by theInternational System of Units (SI), which has the three base units of MKS plus theampere , mole,candela andkelvin .**History**The system goes back to a proposal made in 1833 by the German mathematician

Carl Friedrich Gauss and was in 1874 extended by the British physicistsJames Clerk Maxwell and William Thomson with a set of electromagnetic units. The sizes (order of magnitude) of many CGS units turned out to be inconvenient for practical purposes, therefore the CGS system never gained wide general use outside the field of electrodynamics and was gradually superseded internationally starting in the 1880s but not to a significant extent until the mid-20th century by the more practical MKS (**m**etre-**k**ilogram-**s**econd) system, which led eventually to the modern SI standard units.CGS units are still occasionally encountered in technical literature, especially in the United States in the fields of

electrodynamics andastronomy . SI units were chosen such that electromagnetic equations concerning spheres contain 4π, those concerning coils contain 2π and those dealing with straight wires lack π entirely, which was the most convenient choice for electrical-engineering applications. In those fields where formulas concerning spheres dominate (for example,astronomy ), it has been argued that the CGS system can be notationally slightly more convenient. it can also sometimes be a willy.Starting from the international adoption of the MKS standard in the 1940s and the SI standard in the 1960s, the technical use of CGS units has gradually disappeared worldwide, in the

United States more slowly than in the rest of the world. CGS units are today no longer accepted by the house styles of most scientific journals, textbook publishers and standards bodies, although they are commonly used in astronomical journals such as theAstrophysical Journal .The units gram and centimetre remain useful within the SI, especially for instructional physics and chemistry experiments, where they match well the small scales of table-top setups. In these uses, they are occasionally referred to as the system of “LAB” units. However, where derived units are needed, the SI ones are generally used and taught today instead of the CGS ones.

**CGS units in mechanics**In mechanics, both CGS and SI systems are built in an identical way. The only difference between the two systems is the scale of two out of the three base units needed in mechanics (centimetre versus metre and gram versus kilogram), while the third unit (measure of time:

second ) is the same in both systems . The laws and definitions of mechanics that are used to obtain allderived unit s from the three base units are the same in both systems, for example::$v=frac\{x\}\{t\}$ (deifnition of

velocity ):$F=mfrac\{d^2x\}\{dt^2\}$ (Newton's first law of motion)

:$E\; =\; Fcdot\; dx$ (

energy defined in terms of work):$p\; =\; frac\{F\}\{L^2\}$ (

pressure defined as force per unit area):$eta\; =\; au/frac\{dv\}\{dx\}$ (dynamic

viscosity defined asshear stress per unit velocitygradient ).This explains why, for example, the CGS unit of pressure, barye, is related to the CGS base units of length, mass, and time in the same way as the SI unit of pressure, Pascal, is related to the SI base units of length, mass, and time:

:1 Ba = 1 g/(cm·s

^{2}):1 Pa = 1 kg/(m·s

^{2}).However, expressing a CGS derived unit in terms of the SI base units involves a combination of the scale factors that relate the two systems:

:1 Ba = 1 g/(cm·s

^{2}) = 10^{-3}kg/(10^{-2 }m·s^{2}) = 10^{-1}kg/(m·s^{2}) = 10^{-1}Pa.The mantissas derived from the

speed of light are more precisely 299792458, 333564095198152, 1112650056, and 89875517873681764.A centimetre of capacitance is the capacitance between a sphere of radius 1 cm in vacuum and infinity. The capacitance "C" between two concentric spheres of radii "R" and "r" is: $frac\{1\}\{frac\{1\}\{r\}-frac\{1\}\{R$.By taking the limit as "R" goes to infinity we see "C" equals "r".

**Electrostatic units (ESU)**In one variant of the CGS system,

(Electrostatic units **ESU**), charge is defined via the force it exerts on other charges, and current is then defined as charge per time. It is done by setting theCoulomb force constant $k\_C\; =\; 1$, so thatCoulomb’s law does not contain an explicit prefactor.The ESU unit of charge,

orstatcoulomb **esu charge**, is therefore defined as follows: Bquote|two equal point charges spaced 1centimetre apart are said to be of 1 statcoulomb each if the electrostatic force between them is precisely 1dyne . In CGS electrostatic units, a statcoulomb is equal to a centimetre times square root of dyne:: $(mathrm\{1,statcoulomb\; =\; 1,esu,\; charge\; =\; 1,cmsqrt\{dyne\}=1,g^\{1/2\}\; cdot\; cm^\{3/2\}\; cdot\; s^\{-1)$.Dimensionally in the CGS ESU system, charge "q" is therefore equivalent to m^{1/2}L^{3/2}t^{−1}and is not an independent dimension of physical quantity. This reduction of units is an application of theBuckingham π theorem .**Other variants**There were at various points in time about half a dozen systems of electromagnetic units in use, most based on the CGS system. [

*cite journal*] These include

author = Bennett, L. H.; Page, C. H.; and Swartzendruber, L. J.

title = Comments on units in magnetism

year = 1978

journal = Journal of Research of the National Bureau of Standards

volume = 83

issue = 1

pages = 9–12

doi =**electromagnetic units**(**emu**, chosen such that theBiot-Savart law has no explicit prefactor), Gaussian units, andHeaviside-Lorentz unit s.Further complicating matters is the fact that some physicists and engineers in the United States use hybrid units, such as

volt s percentimetre for electric field. In fact, this is essentially the same as the SI unit system, by the variant to translate all lengths used into cm, e.g. 1 m = 100 cm. More difficult is to translate electromagnetic quantities from SI to cgs, which is also not hard, e.g. by using the three relations $q\text{'}=q/sqrt\{4pi\; epsilon\_0\}$, $mathbf\; E\text{'}=mathbf\; Ecdot\; sqrt\{4pi\; epsilon\_0\}$, and $mathbf\; B\text{'}=mathbf\; Bcdotsqrt\{4pi/\; mu\_0\}$, where $epsilon\_0(,,equiv\; 1/(c^2mu\_0))$ and $mu\_0$ are the well-known vacuum permittivities and "c" the corresponding light velocity, whereas $q,\; ,,mathbf\; E$ and $mathbf\; B$ are the electrical charge, electric field, and magnetic induction, respectively, "without primes" in a SI system and "with primes" in a CGS system.However, the above-mentioned example of "hybrid units" can also simply be seen as a practical example of the previously described "LAB" units usage since electric fields near small circuit devices would be measured across distances on the order of magnitude of one centimetre.

= Physical constants in CGS unitsCite book | year=1978 | author= A.P. French, Edwind F. Taylor| title= An Introduction to Quantum Physics | publisher=W.W. Norton & Company] =**Pro and contra**A key virtue of the Gaussian CGS system is that electric and magnetic fields have the same units, $4piepsilon\_0$ is replaced by $1$, and the only dimensional constant appearing in the equations is $c$, the speed of light. The Heaviside-Lorentz system has these desirable properties as well (with $epsilon\_0$ equalling 1), but is a "rationalized" system (as is SI) in which the charges and fields are defined in such a way that there are many fewer factors of $4\; pi$ appearing in the formulas, and it is in Heaviside-Lorentz units that the

Maxwell equations take their simplest possible form.At the same time, the elimination of $epsilon\_0$ and $mu\_0$ can also be viewed as a major disadvantage of all the variants of the CGS system. Within

classical electrodynamics , this elimination makes sense because it greatly simplifies the Maxwell equations. Inquantum electrodynamics , however, thevacuum is no longer just empty space, but it is filled with virtual particles that interact in complicated ways. Thefine structure constant in Gaussian CGS is given as $alpha=e^2/hbar\; c$ and it has been cause to much mystification how its numerical value $alpha\; approx\; 1/137.036$ should be explained. In SI units with $alpha\; =\; e^2/4\; pi\; epsilon\_0hbar\; c$ it may be clearer that it is in fact the complicated quantum structure of the vacuum that gives rise to a non-trivial vacuum permittivity. However, the advantage would be purely pedagogical, and in practice, SI units are essentially never used in quantum electrodynamics calculations. In fact the high energy community uses a system where every quantity is expressed by only one unit, namely by "eV", i.e. lengths "L" by the corresponding reciprocal quantity $frac\{hbar\; \}\{m\_Lcdot\; c\}\; equiv\; L=frac\{hbar\; c\}\{E\_L\}$, where the Einstein expression corresponding to $m\_L$, $E\_L=m\_L,,c^2$, is an "energy", which thus can naturally be expressed in "eV" ($hbar$ is Planck's constant divided by $2pi$).**See also***

Scientific units named after people

*Units of measurement

*SI electromagnetism units

*SI units **References and notes****General literature***

*

*

*Wikimedia Foundation.
2010.*

### Look at other dictionaries:

**Centimetre–gram–second system of units**— CGS redirects here. For other uses, see CGS (disambiguation). The centimetre–gram–second system (abbreviated CGS or cgs) is a metric system of physical units based on centimetre as the unit of length, gram as a unit of mass, and second as a unit… … Wikipedia**centimetre-gram-second system**— /ˌsɛntəmitə græm ˈsɛkənd sɪstəm/ (say .sentuhmeetuh gram sekuhnd sistuhm) noun a system of units based on the centimetre, gram and second as the primary units of length, mass, and time, and now superseded for scientific purposes by the… … Australian English dictionary**centimetre-gram-second**— centimetre gram secˈond adjective Formerly applied to a system of scientific measurement with the centimetre, gram and second as units of length, mass and time (abbrev CGS or cgs) • • • Main Entry: ↑centimetre … Useful english dictionary**Metre-tonne-second system of units**— The metre tonne second or mts system of units is a system of physical units. It was invented in France, hence the unit names sthène and pièze, and was adopted only by the Soviet Union in 1933, and abolished there in 1955. It was built on the same … Wikipedia**International System of Units**— SI redirects here. For other uses, see Si (disambiguation). Cover of brochure The International System of Units The International System of Units[1] (abbreviated SI from French: Système international d unités[2]) is the modern … Wikipedia**MKS system of units**— The MKS system of units is a physical system of units that expresses any given measurement using fundamental units of the metre, kilogram, and/or second (MKS). Historically the MKS system of units succeeded the cgs system of units and laid the… … Wikipedia**International System of Units (SI)**— ▪ Table International System of Units (SI) Base units unit abbreviation physical quantity metre m length second s time kilogram kg mass ampere A electric current kelvin K thermodynamic temperature candela cd luminous intensity mole mol amount of… … Universalium**Centimetre**— 1 centimetre = SI units 10×10−3 m 10 mm US customary / Imperial units 32.81×10^−3 ft 0.39370 in A centimetre (American spelling: centimeter, symbol cm) i … Wikipedia**Second**— This article is about the unit of time. For other uses, see Second (disambiguation). A light flashing approximately once per second. The second (SI unit symbol: s; informal abbreviation: sec) is a unit of measurement of time, and is the… … Wikipedia**gram**— gram1 /gram/, n. a metric unit of mass or weight equal to 15.432 grains; one thousandth of a kilogram. Abbr.: g Also, esp. Brit., gramme. [1790 1800; < F gramme < LL gramma a small weight < Gk grámma something drawn, a small weight] gram2 … Universalium