AC power plugs and sockets


AC power plugs and sockets
Plugs and sockets may sometimes combine male and female contacts, but the exposed pins or terminals in the socket are not energized. (clockwise from top left: German CEE 7/4 plug and socket, French CEE 7/5 socket)

AC power plugs and sockets are devices for removably connecting electrically operated devices to the power supply. Electrical plugs and sockets differ by country in rating, shape, size and type of connectors. The types used in each country are set by national standards.[1]

Generally the plug is the movable connector attached to an electrically operated device's power cord, and the socket is a fixture on equipment or a building structure. Plugs have male circuit contacts, while sockets have female contacts. The plug has protruding prongs, blades, or pins that fit into matching slots or holes in the socket. Wall-mounted sockets are also called receptacles, outlets, or power points.[2][3]

To reduce the risk of electric shock, plug and socket systems can incorporate a variety of safety features. For example sockets can be designed to accept only compatible plugs and reject all others. There are many systems which block the socket holes with insulators when a plug is not inserted and some systems are designed such that dangerous voltage is never present on an exposed contact. Exposed contacts are present in some sockets, but are used exclusively for grounding (earthing).

Contents

History

Early history

U.S. Patent 774,250. The first electric power plug and receptacle

When electricity was first introduced into the household, it was primarily used for lighting. At that time, many electricity companies operated a split-tariff system where the cost of electricity for lighting was lower than that for other purposes. This led to portable appliances (such as vacuum cleaners, electric fans, and hair driers) being connected to light bulb sockets.

However, as electricity became a common method of lighting houses and operating labour-saving appliances, a safe means of connection to the electric system other than using a light socket was needed. The original two pin electrical plug and socket was invented by Harvey Hubbell and patented in 1904. The original socket into which the user inserted the appliance's plug (of Hubbell's design) itself screwed into the sort of socket used for light bulbs, rather than being directly connected to the building's fixed wiring. (US Patent #774,250) Other manufacturers adopted the Hubbell pattern and by 1915 they were widespread, although in the 1920s and even later, household and light commercial equipment was still powered through cables connected with Edison screw-base adapters to lampholders.[4][5][6]

The grounded consumer plug has several claimants to its invention. The earliest patent for a grounded plug appears to be one applied for on January 11, 1915 by George P. Knapp, on behalf of the Harvey Hubbell company and granted on April 18, 1916.[7] This patent covers the use of a grounding pin which extends further than the other two contacts to ensure that it is engaged first. However, the suggested configuration of the pins was that found in the Australian plug used today primarily in Australasia and China, which was not interoperable with existing two-contact ungrounded plugs. Other grounded plugs that are widely used today were developed later by others so as to be interoperable with ungrounded plugs.

The Schuko-system plug was invented by Albert Büttner, who patented it in 1926.[8] The current American version of the grounded plug, with two vertical blades and a round grounding pin was invented by Philip F. Labre, while he was attending the Milwaukee School of Engineering (MSOE). It is said that his landlady had a cat which would knock over her fan when it came in the window. When she plugged the fan back in, she would get an electric shock. Labre figured out that if the plug were grounded, the electricity would go to earth through the plug rather than through his landlady. He applied a patent on May 12, 1927[9] and was issued a US patent for grounding receptacle and plug in June, 1928.[9] As the need for safer installations became apparent, earthed three-contact systems were made mandatory in most industrial countries.

Proliferation

During the first fifty years of commercial use of electric power, standards developed rapidly based on growing experience. Technical, safety, and economic factors influenced the development of all wiring devices and numerous varieties were invented. Gradually the desire for trade eliminated some standards that had been used only in a few countries. Former colonies may retain the standards of the colonising country, occasionally—as with the UK and a number of its former colonies—after the colonising country has changed its standard. Sometimes offshore industrial plants or overseas military bases use the wiring practices of their controlling country instead of the surrounding region. Hotels and airports may maintain receptacles of foreign standards for the convenience of travellers. Some countries have multiple voltages, frequencies and plug designs in use, which can create inconvenience and safety hazards.

Consolidation

Many countries have settled on one of a few de facto standards, which became formalised as official national standards, although there remain older installations of obsolete wiring in most countries. Some buildings have wiring that has been in use for almost a century and which pre-dates all modern standards.

In Europe, since 1965 the International Commission on the Rules for the Approval of Electrical Equipment (CEE) has published a standard (CEE 7 Specification for Plugs and Socket-Outlets for Domestic and Similar Purposes [10]) describing the plugs and sockets used. In North America the National Electrical Manufacturers' Association publishes standards for plugs and sockets.

There has been some movement towards consolidation of standards for international interoperability. For example, the CEE 7/7 plug has been adopted in several European countries and is compatible with both CEE 7/5 and CEE 7/4 sockets, while the ungrounded and unpolarised Europlug is compatible with an even greater proportion of European and other socket types. IEC 60906-1 has been proposed as a common standard for all 230 V plugs and sockets worldwide but has only been adopted in Brazil to date. IEC 60906-2 recognizes the wide use of the NEMA 5-15 parallel blade plug and socket and recommends it as the standard for all 120 V applications.

Many manufacturers of electrical devices like personal computers put an IEC 60320 inlet on the device, and supply for each country a power cord with an IEC 60320 coupler on one end and a national power plug at the other. The electrical device itself is designed to adapt to a wide range of voltage and frequency standards. This has the practical benefit of reducing the amount of testing required for approval, and reduces the number of different product variations that must be produced to serve world markets.

Application issues

Design features of plugs and sockets have gradually developed to reduce the risk of electric shock and fire. Safety measures may include pin and slot composition to permit only the precise insertion of plug into socket, earth pins longer than power pins so the device becomes earthed before power is connected, electrical insulation of pin shanks to reduce live contact exposure when a plug is partially inserted in a socket, socket slot shutters that open only for the correct plug, as well as built in fuses and switches.

Grounding/earthing

A third contact may be provided for a connection to earth ground, intended to protect against insulation failure of the connected device. A common approach is for electrical sockets to have three holes, which can accommodate either 3-pin earthed or 2-pin non-earthed plugs. When grounded distribution systems became common, earlier ungrounded socket types were either replaced with new standards, or revised to include a grounding pin.

Different types of plugs are used for different IEC appliance classes. The assigned class depends on whether or not the device is earthed, and the degree of insulation it incorporates. Class I, for example, refers to earthed equipment which requires a third contact in the plug and socket, while Class II refers to unearthed equipment protected by double insulation.

Polarization

Some wiring systems have two circuit conductors, both of which have a significant potential with respect to earth ground. Where the wiring system defines a "neutral" conductor that is connected to earth ground, it is an advantage for appliance designers to maintain that distinction. This requires a plug that can only be connected in one way to the wall socket, so that the energized and neutral conductors are not interchanged. Such "polarized" plugs cannot be interchangeable with non-polarized receptacles.

Polarization is maintained by the shape, size, or position of plug pins and socket holes to ensure that a plug fits only one way into a socket. The (single pole) switch of the appliance is then connected in series with the energized wire. For an appliance such as a toaster, putting the exposed heating wires on the neutral side of the switch provides a small measure of extra protection against electrical shock; similarly, lamps with Edison screw bases will connect the screw shell of the lamp socket to the neutral conductor.

Interchange hazards

Plugs and sockets are designed as a system to meet standards for safety and reliability. Some types of receptacles may accept more than one type of plug; where this is an official, approved intention of the receptacle design, all the approved combinations will be tested to the applicable safety standards. Occasionally, plug and receptacle combinations may allow power to flow but may not meet product standards for mating force, grounding, current capacity, life expectancy, or safety. Improvised or user-modified connectors will not meet the product safety standards. Adapters between different standards can overcome mechanical incompatiblity.

Types in present use

Voltage/frequency
Plugs

There are two basic standards for voltage and frequency in the world. One is the North American standard of 120 volts at a frequency of 60 Hz, and the other is the European standard of 220–240 volts at 50 Hz. The differences arose for historical reasons as discussed in the article Mains electricity. Usually NEMA type receptacles and plugs are used on 60 Hz systems, and CEE and other types are used on 50 Hz systems, but exceptions exist.

Countries on other continents have adopted one of these two voltage standards, although some countries use variations or a mixture of standards. The outline maps show the different plug types, voltages and frequencies used around the world,[11] color-coded for easy reference.

Types are sometimes designated by an arbitrary letter designation from a 1998 US government publication,[11] which has no official standing but is useful as a de facto naming standard when comparing different AC power plugs and sockets.

Special purpose sockets may be found in residential, industrial, commercial or institutional buildings. Examples of systems using special purpose sockets include:

  • "Clean" ground for use with computer systems,
  • Emergency power supply,
  • Uninterruptible power supply, for critical or life-support equipment,
  • Isolated power for medical instruments,
  • "Balanced" or "technical" power used in audio and video production studios,
  • Theatrical lighting
  • Outlets for electric clothes dryers, electric ovens, and air conditioners with higher current rating.

Depending on the nature of the system, special-purpose sockets may be just labelled or coloured to identify a reserved use of a system (for example, computer power), or may have different arrangements of pins or keying provisions to make them physically incompatible with general purpose plugs, to prevent use of unintended equipment.

Argentina IRAM 2073 (Argentinian 10 A/250 V) and compatible types

The Argentinian plug is a three-wire earthed plug rated at 10 A (or 20A), 250 V defined by IRAM and used in Class 1 applications in Argentina. This plug is similar in appearance to the Australasian and Chinese plugs. The pin length is same as the Chinese version. The most important difference from the Australasian plug is that the Argentinian plug is wired with the live and neutral contacts reversed.

In Brazil, this kind of plug is still commonly found in high-power appliances like air conditioners, dishwashers, and household oven. Since the adopted IEC 60906-1 standard prescribes a high-current plug version, the original motivation to use the "Argentinian" plug ceased to exist, and the new standard should prevail in the long term.

Australian standard AS/NZS 3112 (Australasian 10 A/240 V)

Australasian switched 3-pin dual power point (socket)
Australian 2005 standard power plug

This plug, used in Australia, New Zealand, Fiji, Argentina, Solomon Islands and Papua New Guinea, has a grounding pin, and two flat current-carrying pins forming an upside down V-shape.[12] The flat blades measure 6.5 by 1.6 mm (0.256 by 0.063 in) and are set at 30° to the vertical at a nominal pitch of 13.7 mm (0.539 in). Australian and New Zealand wall sockets almost always have switches on them for extra safety, as in the UK. An unearthed version of this plug with two angled power pins but no earthing pin is used with small double-insulated appliances, but the powerpoint (wall) outlets always have three pins, including a ground pin.

There are several AS/NZS 3112 plug variants,[13] including ones with larger pins and/or differently shaped ground pins used for devices drawing 15, 20, 25 and 32 amps. These sockets accept plugs of equal or of a lower current capacity, but not of higher capacity. For example, a 10 A plug will fit all sockets but a 20 A plug will fit only 20, 25 and 32 A outlets.

Australasia's standard plug/socket system was originally codified as standard C112 (floated provisionally in 1937, and adopted as a formal standard in 1938), which was superseded by AS 3112 in 1990. As of 2005, the latest major update is AS/NZS 3112:2004, which mandated insulated pins[14] by 2005 at the point of sale in all Australian States and New Zealand. However, equipment and cords made before 2003 can still be used.

British and compatible standards

BS 4573 (UK shaver)

BS 4573 socket

In the United Kingdom and Ireland, there is a two-pin socket for use with electric shavers in bath or shower rooms.[15] It derives from the unearthed version of 5/6 ampere British plug and it has 0.2 in (5.08 mm) diameter pins 58 in (15.88 mm) apart. The sockets for this plug are often designed to accept unearthed CEE 7/16, US or Australian plugs as well. Sockets are often able to supply either 230 V or 115 V. In wet zones, they must contain an isolation transformer compliant with BS 3535.

BS 546 and related types

5 Ampere
BS 546- 5 ampere plug

India and Pakistan have standardised on a plug which was originally defined in British standard BS 546. It has three large round pins in a triangular pattern. The BS 546 standard is also used in parts of the Middle East (Kuwait, Qatar) and parts of Asia and South East Asia that were electrified by the British. This type was also previously used in South Africa, but has been phased out in favour of the 15 A version there. Similarly, in Ghana, Kenya and Nigeria, the plug has been mostly replaced by the British BS 1363. This 5 A plug, along with its smaller 2 A cousin, is sometimes used in the UK for centrally switched domestic lighting circuits, in order to distinguish them from normal power circuits. Both plugs have an unearthed variant, incompatible with 3-prong version because of the distance between pins.

15 Ampere
BS546- 15 ampere plug

The 15 A version of the BS 546 plug has larger pins spaced at 7.05 by 21.1 mm (0.278 by 0.831 in). Live and neutral are spaced 1 in (25.4 mm) apart, and earth is 1+18 in (28.58 mm) away from each of them. In India, Pakistan, Sri Lanka, Nepal and Namibia, the 15 A version is used for larger appliances. Some countries like South Africa use it as the main domestic plug and socket, where sockets always have an on–off switch built into them. It is still commonly found in Hong Kong and Botswana, alongside BS 1363. BS 546 was almost universally used in the UK and Ireland for indoor dimmable theatre and architectural lighting installations, but there is now a widespread move to using CEE 16 A industrial sockets in new installations. It was also often used for non-dimmed but centrally controlled sockets within such installations, or where an unfused plug was desired. This plug is also widely used in Israel, Singapore, Sri Lanka and Malaysia for air conditioners and clothes dryers.

A socket has been developed for the Indian subcontinent that accepts both 5A and 15 A BS 546 plugs, with adjacent holes of the appropriate gauge.

BS 1363

UK (BS1363) socket

The British Standards 1363 plug[16] is used in the United Kingdom and other countries. Compatible plugs standards are IS 401 and 411 (Ireland), MS 589 (Malaysia) and SS 145 (Singapore), and SASO 2203 (Saudi Arabia).

This plug, commonly known as a 13 amp plug, is a large plug that has three rectangular pins forming a triangle. Live and neutral are 17.4 mm (0.685 in) long, and spaced 22.2 mm (0.874 in) apart. 9 mm (0.354 in) of insulation at the trailing ends of the pins prevents accidental contact with a bare connector while the plug is partially inserted. The earth pin is approximately 3.97 by 7.92 mm (0.156 by 0.312 in) and 22.2 mm (0.874 in) long.

The plug has a 1 in (25.40 mm) long fuse to protect the appliance flexible cable from overload. British wiring standards allow up to 32A ring main circuits, so circuit protection of the fixed wiring cannot protect relatively small flexible cable conductors. Sockets are wired with neutral on the left and live on the right (viewed from the front of the socket) so that the fuse in the plug disconnects the live feed if it blows. The same convention is used for all British sockets connected directly to "mains" wiring.

UK wiring regulations (BS 7671) require sockets in homes to have shutters over the live and neutral connections to prevent the insertion of objects other than electric plugs. On Class II appliances, the earth pin is often plastic and serves only to open the shutters and to enforce the correct orientation of live and neutral pins. Opening the shutters with a screwdriver to insert other plugs may be dangerous if the plugs do not have a fuse or do not fit properly.

BS 1363 plugs and sockets started appearing in 1946 and BS 1363 was first published in 1947. By the end of the 1950s, it had replaced the earlier BS 546 in new installations, and by the end of the 1960s, most earlier installations had been rewired to BS 1363 standards. Outlets usually include switches on the live side for convenience and safety.

CEE standards

CEE 7/4 (German "Schuko" 16 A/250 V grounded)

Schuko plug and socket

CEE 7/4, commonly called "Schuko" socket, has a recessed round shape with two symmetrical round receptacles and two grounding clips on the sides of the socket. The Schuko connection system is symmetrical and unpolarised by design, allowing live and neutral to be reversed. Its dimensions are compatible with CEE 7/5 (french plug/socket) except that the female ground contact is omitted. The socket also accepts Europlugs and CEE 7/17 plugs. It supplies up to 16 amperes. It is used in Albania, Austria, Bosnia and Herzegovina, Bulgaria, Chile, Croatia, Estonia, Finland, Germany, Greece, Hungary, Iceland, Indonesia, Italy, Latvia, Luxembourg, Republic_of_Macedonia, the Netherlands, Norway, Pakistan, Portugal, Romania, Russia,[17] Serbia, Slovenia, South Korea, Spain, Sweden, Turkey, Ukraine and Uruguay.

"Schuko" is an abbreviation for the German word Schutzkontakt, which means "Protective (that is, grounded) contact".

Some countries, notably Finland, Norway and Sweden, require child-proof outlet shutters;[citation needed] the German Schuko standard does not have this requirement.

CEE 7/5 (French)

French socket
French plug

France, Belgium, Poland, Czech Republic, Slovakia and some other countries have standardized on a round plug with two round pins measuring 4.8 by 19 mm (0.189 by 0.748 in), spaced 19 mm (0.748 in) apart and with a hole for the socket's ground pin. This standard will also accept Europlugs and CEE 7/17 plugs. Sockets are installed with the earth pin upwards. Although the plug is polarised, there is no universally observed standard for connecting the live and neutral. In the former Czechoslovakia Standard ČSN 33 2180:1979, section 6.2.2. required live to be on the left side of socket. Child-resistant outlet shutters are required by French and Belgian standards, however they are not required in all countries where this type is used.

CEE 7/5 plugs are not compatible with the CEE 7/4 socket because grounding in the CEE 7/5 socket is effected by a round male pin permanently mounted in the socket.

This type has been authorised in Denmark since 1 July 2008, but sockets of this kind are not yet common.

CEE 7/7 plug

CEE 7/7 plug

In order to bridge the differences between German and French standards, the CEE 7/7 plug was developed. It is polarised to prevent the live and neutral connections from being reversed when used with a French CEE 7/5 outlet, but allows polarity reversal when inserted into a German CEE 7/4 socket. The plug is rated at 16 A.

It has grounding clips on both sides to connect with the CEE 7/4 socket and a female contact to accept the grounding pin of the CEE 7/5 socket. It is also used in Spain and Portugal. Currently, appliances are sold with non-rewireable CEE 7/7 plugs attached. This means that the plugs are now identical between countries like France and Germany, but the sockets are different.

CEE 7/16 Europlug

CEE 7/16 plug and old socket

This two-pin plug is popularly known as the Europlug. The plug is ungrounded and has two round 4 mm (0.157 in) pins, which usually converge slightly towards their free ends. It is described in CEE 7/16[18] and is also defined in Italian standard CEI 23-5 and Russian standard GOST 7396. This plug is intended for use with devices that require 2.5 amperes or less. Because it is unpolarised, it can be inserted in either direction into the socket, so live and neutral are connected arbitrarily. The separation and length of the pins allow its safe insertion in most CEE 7/5, CEE 7/4 "Schuko", Israeli, CEE 7/7, Swiss, Danish and Italian outlets, as well as BS 4573 UK shaver sockets. It can be forced into BS 546 (5 amperes) and some BS 1363 sockets, if the shutters are opened, though the connection may be neither reliable in either case, nor safe.

The Europlug itself is used in Class II applications throughout continental Europe. It is also used in the Middle East (Iran), most African nations, South America (Brazil, Chile, Argentina, Peru and Bolivia), Asia (India, Bangladesh, Sri Lanka, Indonesia, Pakistan, South Korea, and the Philippines) as well as Russia and the former Soviet republics, such as Ukraine, Armenia, Georgia, and many developing nations. It is also used alongside the BS 1363 in many nations, particularly former British colonies.

Variations in sockets
Unearthed socket compatible with both Schuko and French plugs

Europlug sockets have no ground provisions and consequently have been phased out in most countries. For example, in Germany, ungrounded outlets are rare, found only in very old installations, whereas in the Netherlands they are common in "dry areas" such as in bedrooms or living rooms. Standards also vary between countries as to whether child-resistant shutters are required. Depending on the country and the age of the socket these sockets may have 4.0 or 4.8 mm receptacles. The latter accept CEE 7/5 and CEE 7/4 plugs in addition to Europlugs, though without ground connection. Countries using the CEE 7/5 and CEE 7/4 standards vary in whether ungrounded Europlug sockets are still permitted in environments where the need for grounding is less critical. Adaptors and trailing sockets and power strips designed to accept only Europlugs with 4 mm (0.157 in) pins may also have plastic barriers in place to prevent CEE 7/17, Schuko or French plugs from entering.

CEE 7/17 (German/French 16 A/250 V ungrounded)
CEE 7/17 plug

This plug also has two round pins but the pins are 4.8 mm (0.189 in) in diameter like CEE 7/5 and CEE 7/4 and the plug has a round plastic or rubber base that stops it being inserted into small sockets intended for the Europlug. Instead, it fits only into large round sockets intended for CEE 7/5 and CEE 7/4. The base has holes in it to accommodate both side contacts and socket earth pins. It is used for large appliances, and in South Korea for all domestic non-earthed appliances. It is also defined in Italian standard CEI 23-5. Can also be inserted in to Israeli SI 32 with some difficulty.

China CPCS-CCC (Chinese 10 A/250 V)

Chinese sockets accepting plug NEMA, Europlug (upper) and Australian (lower, standard)

The standard for Chinese plugs and sockets is set out in GB 2099.1–2008 and GB 1002–2008. As part of China's commitment for entry into the WTO, the new CPCS (Compulsory Product Certification System) has been introduced, and compliant Chinese plugs have been awarded the CCC Mark by this system. The plug is three wire, earthed, rated at 10 A, 250 V and used for Class 1 applications (But a 16 A version also existes). Although the pins on the Chinese plug are 1 mm (0.039 in) longer, the Australasian plug can be used with mainland Chinese socket. The pins in Chinese plugs are slightly thinner than those in Australian plugs, so a plug or adaptor claiming to be suitable for use in both Chinese and Australian plugs may not fit either outlet correctly. A Chinese plug may tend to fit loosely in an Australian socket, while the relatively thick pins of an Australian plug may not fit easily into a Chinese socket.[citation needed] In China, the sockets are installed upside-down relative to the Australasian ones.[citation needed] China also uses American/Japanese NEMA 1–15 sockets and plugs for Class-II appliances. However, the voltage at a Chinese socket of any type is 220.

Danish Section 107-2-D1 (10/13/16 A/250 V earthed)

Danish 107-2-D1, standard DK 2-1a, with round power pins and half round ground pin
Outlet for Danish computer equipment plug's tilted flattened pins and half round ground pin (mainly used in professional environment), standard DK 2-5a

This Danish standard plug is described in the Danish Plug Equipment Section 107-2-D1 Standard sheet (SRAF1962/DB 16/87 DN10A-R). The plug is similar to the French CEE 7/5 except that it has an earthing pin instead of an earthing hole (and vice versa on the socket). This makes the Danish socket more unobtrusive than the French socket which is a cavity into the wall to protect the earthing pin from mechanical damage (and to protect from touching the live pins). The Danish standard provides for outlets to have child-resistant shutters.

The Danish socket will also accept the CEE 7/16 Europlug or CEE 7/17 Schuko-French hybrid plug. CEE 7/4 (Schuko), CEE 7/7 (Schuko-French hybrid), and grounded CEE 7/5 French plugs will also fit into the socket but should not be used for appliances that need earth contact. The current rating on both plugs is 13 A.

A variation (standard DK 2-5a) of the Danish plug is for use only on surge protected computer outlets. It fits into the corresponding computer socket and the normal socket, but normal plugs deliberately don't fit into the special computer socket. The plug is often used in companies, but rarely in private homes.

There is a variation for hospital equipment with a rectangular left pin, it is used for life support equipment.

Traditionally all Danish sockets were equipped with a switch to prevent touching live pins when connecting/disconnecting the plug. Today, sockets without switch are allowed, but then it is a requirement that the sockets have a cavity to prevent touching the live pins. However, the shape of the plugs generally makes it difficult to touch the pins when connecting/disconnecting.

Since the early 1990s grounded outlets have been required in all new electric installations in Denmark. Older outlets need not be grounded, but all outlets, including old installations, must be protected by ground-fault interrupters (HFI or HPFI in Danish) by 1 July 2008.

As of 1 July 2008, wall outlets for French 2-pin, female earth CEE 7/5 are permitted for installations in Denmark.[19] This was done because no electrical equipment sold to private users is equipped with a Danish plug.

Sockets for the Schuko will not be permitted. The reason is that a large number of currently used Danish plugs (coincidentally made by the afore mentioned Lauritz Knudsen monopoly) will jam when inserted into a Schuko socket. This may cause damage to the socket. It may also result in a bad connection of the pins, with resultant risk of overheating and fire. Many international travel adapter sets sold outside Denmark match CEE 7/16 (Europlug) and CEE 7/7 (Schuko-French hybrid) plugs which can readily be used in Denmark.

Israel SI32

Two Israeli plugs and one socket. The left plug is the old standard, the one on the right is the 1989 revision

This plug, defined in SI 32 (IS16A-R), is unique to Israel. It has three flat pins to form a Y-shape. Live and neutral are spaced 19 mm (0.75 in) apart. The plug is rated at 16 A. In 1989, the standard was revised to use three round 4.5 mm (0.177 in) pins in the same locations, allowing the socket to accept the Europlugs used in Europe and Israel for non-earthed appliances. Sockets made since 1989 accept both flat and round pins for compatibility with both old and new plugs. As of 2008, pre-1989 sockets which accept only old-style plugs are very rare in Israel.

This plug is also used in the areas controlled by the Palestinian National Authority in the West Bank and all of the Gaza Strip.

Italian standards

Italian CEI 23-16/VII plug and socket.
Side by side comparison of Italian CEI 23-16/VII plugs rated 16 ampere (left) and 10 ampere (right).
An Italian installation carrying both Italian type CEI 23-16/VII sockets (16A on the left; 10A on the right).

Italy CEI 23-16/VII

The Italian earthed plug/socket standard, CEI 23-16/VII, includes two models rated at 10A and 16A that differ in contact diameter and spacing (see below for details). Both are symmetrical, allowing the live and neutral contacts to be inserted in either direction.

The double standard was initially adopted because in Italy, up to the second half of the twentieth century, the electric power used for lamps (Luce = lighting) and the one used for all other appliances (Forza = electromotive force; or Uso Promiscuo = general purpose) were sold at different fares, charged with different taxes, accounted with separated electricity meters, and sent on different wire lines that ended with different sockets.[20] Even though the two electric lines (and respective fares) were definitively unified during the summer of 1974[21] many houses kept twin wires and twin electricity meters for years thereafter. The two gauges for plugs and sockets thus became a de facto standard which is still in use today and has been standardized with CEI 23-16/VII. Older installations often have sockets that are limited to either the 10A or the 16A style plug, requiring the use of an adapter if the other gauge needs to be connected.

CEE 7/16 unearthed Europlugs are also in common use; they are standardized in Italy as CEI 23-5 and fit most of the appliances with low current requirement and double insulation.

Appliances with CEE 7/7 Schuko-French plugs are often sold in Italy too; however not every socket will accept them since the pins of the CEE 7/7 Schuko-French plugs are thicker than the Italian ones. Adapters are cheap and commonly used to connect CEE 7/7 plugs to CEI 23-16/VII sockets, though the power rating may be mismatched (16A to 10A) and may lead to potentially unsafe connection in some cases.

The current Italian standards provide for outlets to have child-resistant shutters.

10 A

The 10 ampere style extends CEE 7/16 by adding a central earthing pin of the same gauge. Thus, CEI 23-16-VII 10A sockets can accept CEE 7/16 Europlugs. This is the plug shown in the first picture.

16 A

The 16 ampere style looks like a magnified version of the 10A style, identical in shape. However, the pins are 5 millimetres thick (being 4mm thick in 10A type), 8mm apart (while 5.5mm apart in 10A type) and 7mm longer. The packaging of these plugs in Italy may claim they are a "North European" type. In the past they were also referred to as per la forza motrice[22] (for electromotive force, see above) or sometimes industriale (industrial), although the latter has never been a correct definition as factories used preminently three-phase current and specialized connectors.

Multiple standard sockets

A bipasso socket (number 1) and an Italian adapted schuko (number 2 in the photo) in a modern installation.
An Italian VIMAR brand universale socket which can accept CEE 7/4 (German) CEE 7/5 (French) CEE 7/7 (German/French) CEE 7/16 (Europlug) CEE 7/17 (German/French ungrounded) NEMA 1-15 (USA/Japan) and both CEI 23-16/VII 10A and 16A italian plugs.

Given that the plug with which appliances are fitted and sold varies, in modern installations in Italy (and in other countries where CEI 23-16/VII plugs are used) it is likely to find sockets that can accept more than one standard. The simpler type has a central round hole and two 8-shaped holes above and below. This design allows the connection of both styles of CEI 23-16/VII plugs (10A and 16A) and the CEE 7/16 Europlug. The advantage of this socket style is its small, compact face. VIMAR brand claims to have patented this socket first in 1975[23] with their Bpresa model; however soon other brands started selling similar products mostly naming them with the generic term presa bipasso (twin-gauge socket) that is now of common use.

A second, quite common type looks like a CEE 7/4 (German) socket, but adds a central grounding hole. This design can accept CEE 7/4 (German), CEE 7/5 (French), CEE 7/7 (German/French) and CEI 23-16/VII italian 10A plugs. Some of these sockets may also have 8-shaped holes to accept CEI 23-16/VII italian 16A plugs as well. Its drawback is that it’s twice as large as a normal CEI 23-16/VII italian socket.

Other types may push compatibility even further. The VIMAR-brand universale (all purpose) socket, for example, accepts CEE 7/4 (German), CEE 7/5 (French), CEE 7/7 (German/French), both CEI 23-16/VII italian 10A and 16A plugs, and also NEMA 1-15 (USA/Japan) plugs.

Other countries

Outside of Italy, CEI 23-16/VII plugs are found in Albania, Canary island, Chile, Ethiopia, Libya, Maldives, San Marino, São Tomé e Príncipe, Syria, Uruguay, Vatican City, sporadically in North Africa (Tunisia), and occasionally in older buildings in Spain.

North American and IEC 60906-2

NEMA 1-15 (15 A/125 V ungrounded)

Unpolarized NEMA 1–15 plug

This plug and socket, with two flat parallel non-coplanar blades and slots, is used in most of North America and on the east coast of South America on devices not requiring a ground connection, such as lamps and double insulated small appliances. It is standardized in the US by the National Electrical Manufacturers Association (NEMA)[24] Ungrounded NEMA 1–15 sockets have been prohibited in new construction in the United States and Canada since 1962, but remain in many older homes and are still sold for replacement. NEMA 1-15 plugs are still very common because they are also compatible with newer NEMA 5-15 (grounding) sockets.

Initially, both of the the plug blades were the same width, so the plug could be inserted into the socket either way around. Most plugs manufactured from the 1950s onward are polarized by means of a neutral blade wider than the live blade, so the plug can be inserted only the right way. Polarized NEMA1-15 plugs will not fit into unpolarized sockets, which possess only narrow slots. NEMA 1-15 plugs will fit NEMA 5-15 grounded sockets. Some devices that do not distinguish between neutral and live, such as internally isolated electronic power supplies, are still produced with unpolarized pins (both narrow).

Cheater plug adapters allow a grounding 5-15 plug to be fitted to a non-grounded 1-15 receptacle.

JIS C 8303, Class II (Japanese 15 A/100 V ungrounded)
Japanese outlet with ground post, for a washing machine

The Japanese plug and socket appear physically identical to NEMA 1–15. However, the Japanese system incorporates stricter dimensional requirements for the plug housing, different marking requirements, and mandatory testing and approval by MITI or JIS.[25]

Many Japanese outlets and multi-plug adapters are unpolarized — the slots in the sockets are the same size — and will accept only unpolarized plugs. Japanese plugs generally fit into most North American outlets without modification, but polarized North American plugs may require adapters or replacement non-polarized plugs to connect to older Japanese outlets. However, in Japan the voltage is 100 volts, and the frequency in eastern Japan is 50 rather than 60 Hz. Therefore, many North American devices which can be physically plugged into Japanese sockets may not function properly.

NEMA 5-15(15 A/125 V grounded)

NEMA 5–15 plug, left. Decorative-style duplex outlet, center. Ordinary duplex outlet, right.

The NEMA 5-15 plug has two flat parallel blades like NEMA 1-15, but also adds a grounding blade.[24] It is rated for 15 amperes at 125 volts. The ground pin is longer than the live and neutral blades, so the device is grounded before the power is connected. Both current-carrying blades on grounding plugs are narrow, since the ground pin enforces polarity. NEMA 1-15 plugs are also compatible with NEMA 5-15 sockets.

The 5–15 socket is standard in Canada, the United States, and Mexico. It is also used in Central America, the Caribbean, northern South America (Colombia, Ecuador, Venezuela and part of Brazil), Japan, Taiwan and Saudi Arabia. Looking directly at a NEMA 5-15 outlet with the ground at the bottom, the neutral slot is on the left, and the live slot is on the right. Outlets may be installed in any orientation.

In some parts of the United States and all of Canada, tamper-resistant outlets are now required in new construction. These prevent contact by objects like keys or paper clips inserted into the receptacle.[26]

In theater lighting, this connector is sometimes known as PBG for Parallel Blade with Ground, Edison or Hubbell, the name of a common manufacturer.[citation needed]

NEMA 5–20 (North American 20 A/125 V grounded)
5–20RA (Canada) or 5-20R (USA) T-slot receptacle mounted with the ground hole up. The neutral connection is the wider T-shaped slot on the lower right

This is a 20 amperes receptacle. The NEMA 5–20 A has a T-slot for the neutral blade which allows either 15 amperes parallel-blade plugs or 20 amperes plugs to be used.

JIS C 8303, Class I (Japanese 15 A/100 V grounded)

Japan also uses a NEMA 5-15 plug similar to the North American one.[25] However it is less common than its NEMA 1-15 equivalent.

NEMA 14–30

A 30 amperes, 3 wire single-phase grounding receptacle is often used for electric clothes dryers. 240 volts from the split phase system is used for the heating elements, and the motor and controls run on 120 volts.

NEMA 14–50

A 50 amperes 3 wire single-phase grounding outlet is usually installed in kitchens and used for electric cooking ranges and ovens. As for dryers, lighting and motors run on 120 V and the main heating element is connected for 240 V.

Thai 3 pin plug TIS 166-2549 (2006)

Thai multi-standard 3-pin sockets safely accept NEMA 1-15, NEMA 5-15, Europlugs, and also the Thai 3 pin plug. This round-pin plug is similar to the Israeli plug but its pin dimensions are 4.8 mm instead of 4.0 mm, the pins are insulated,[27]and the grounding pin has the same position of NEMA 5-15 one (so the socket can't accept Israeli plugs)

Soviet standard GOST 7396 C 1 (6 A or 16 A /250 V ungrounded)

This Soviet plug, still widely used in modern Russia, has pin dimensions and spacing equal to the Europlug, but lacks the insulation sleeves. Unlike the Europlug, it was rated for 6 A. It has a round body like the French CEE 7/5 or flat body with a round base like CEE 7/17. The round base has no notches. The pins are parallel and do not converge. The body is made of fire resistant thermoset plastic. The corresponding 6 A socket accept the Europlug, but not others as the 4.5 holes are too small to accept the 4.8 mm pins of CEE 7/4, CEE 7/5 or CEE 7/7 plugs.

There were also moulded rubber plugs available for devices up to 16 A similar to CEE 7/17, but with a round base without any notches. They could be altered to fit a CEE 7/5 or CEE 7/4 socket by cutting notches with a sharp knife.

Swiss SEV 1011 (Swiss 10 A/250 V)

regular SEV 1011 plug and covered socket
SEV 1011 plugs and non-SEV 1011 socket showing a potential shock hazard: the appliance is energised although the plug is not fully inserted

Switzerland has its own standard which is described in SEV 1011. (ASE1011/1959 SW10A-R) This plug is similar to the Europlug (CEE 7/16), except that it has an offset earth pin and the pin shanks are not necessarily insulated (the pins of most modern appliances are), so plugs partially inserted into non-recessed sockets present a shock hazard. Sockets used in kitchens, bathrooms and other wet areas are recessed, while those used elsewhere are not (after 2015, only recessed sockets are allowed to be installed in any setting, minimizing the risk of electric shocks). Some plugs and adaptors have a tapered form and can be used in either environment, while others will fit only the non-recessed sockets. Swiss sockets accept Swiss plugs or Europlugs (CEE 7/16). There is also a non-earthed two-pin variant with the same pin shape, size, and spacing as the SEV 1011's live and neutral pins, but with a more flattened hexagonal form. It fits into Swiss sockets and CEE 7/16 sockets, and is rated for up to 10 A.

A less-common variant has 3 square pins and is rated for 16 amperes. Above 16 amperes, equipment must either be hardwired to the electrical supply system with appropriate branch circuit protection, or connected to the mains with an appropriate high power industrial connector.

Proposed common standard

A Brazilian socket for 20 A/250 V, meant for use with larger pins than 10 A version

In 1986, the International Electrotechnical Commission published IEC 60906-1, the specification for a plug that looks similar but is not identical to the Swiss plug. This plug was intended to one day become the common standard for all of Europe and other regions with 230 V mains, but the effort to adopt it as a European Union standard was put on hold in the mid 1990s.[28]

Brazil, which had been using mostly Class II Europlugs (while households also commonly presenting socket fittings for the NEMA 1–15 and NEMA 5–15 standards), set out IEC 60906-1 as the national standard in 2001 under specification NBR 14136.[29] However, this standard was never really enforced or encouraged in that country until 2007, when the adoption of IEC 60906-1 was made optional for manufacturers. Also, it helped domestic consumers that most of Class II plugs fitted in the new IEC 60906-1 socket.

Since January 1, 2010, new electrical appliances in Brazil must now comply with the new IEC 60906-1 requirement. End-user stores and resellers can sell equipment without adoption deadlines, but importers will no longer be allowed to bring in nonconforming devices, nor will manufacturers be able to sell them in Brazil.

There are two types of sockets and plugs in this system: one for 10 A, with a 4mm pin diameter, and another for 20 A, with a 4.8 mm pin diameter, the latter used for heavier appliances such as microwave ovens.[30]

South Africa has also introduced the IEC 60906 standard as SANS 164-2.[31][32]

IEC 60906-2 designated the NEMA 5-15 grounded 15 ampere socket and plug as the standard for 120 volt applications; it is a recognition that the NEMA parallel blade plug and socket is already in universal use in North America.

Comparison of sockets

Type1 Socket standard Power rating Grounded Polarised Fused Insulated pins
A NEMA 1–15 unpolarised 15 A/125 V No No No No
NEMA 1–15 polarised 15 A/125 V No Yes No No
JIS C 8303, Class II 15 A/100 V No No No No
B NEMA 5–15 15 A/125 V Yes* Yes No No
NEMA 5–20 20 A/125 V Yes* Yes No No
JIS C 8303, Class I 15 A/100 V Yes* Yes No No
C CEE 7/16 (Europlug) 2.5 A/250 V No No No Yes
CEE 7/17 16 A/250 V No No2 No No
GOST 7396 C 1 6 A/250 V
16 A/250 V
No No No No
D and M BS 546 (2 pin) 2 A/250 V
5 A/250 V = BS 4573
No No No No
BS 546 (3 pin) 2 A/250 V
5 A/250 V
15 A/250 V = SABS 164
30 A/250 V
Yes Yes No No
E CEE 7/5 16 A/250 V Yes* Yes3 No No
F CEE 7/4 Schuko 16 A/250 V Yes* No No No
G BS 1363, IS 401 & 411, MS 589, SS 145 13 A/230-240 V Yes Yes Yes Yes
H SI 32 16 A/250 V Yes4 Yes No No
TIS 166–2549 16 A/250 V Yes Yes No Yes
I AS/NZS 3112 10 A/240 V
15 A/240 V
20 A/240 V
25 A/240 V
32 A/240 V
Yes* Yes No Yes
CPCS-CCC 10 A/250 V Yes Yes No No
IRAM 2073 10 A/250 V Yes Yes No No
J Swiss SEV 1011 10 A/250 V
16 A/250 V
Yes* Yes No No
K Danish 107-2-D1 13 A/250 V Yes* Yes No No
L CEI 23-16/VII 10 A/250 V
16 A/250 V
Yes* No No Yes
IEC 60906-1 (2 pin) 10 A and 20 A/250 V No No No Yes
IEC 60906-1 (3 pin) 10 A and 20 A/250 V Yes* Yes No Yes
* There are common ungrounded plugs that work with the grounded sockets of this type.
Deep-wall socket prevents human contact with pins.
CEE 7/7 specifies a grounded hybrid plug that will fit into both the CEE 7/4 and CEE 7/5 sockets. CEE 7/17 specifies an ungrounded hybrid plug that will fit into both the CEE 7/4 and CEE 7/5 sockets.
1 Type letters are from a US Department of Commerce report[11] that sees widespread but not universal use to differentiate plug and socket types based on rough mechanical compatibility. Most, but not all common household plugs have an associated letter.
2 There are some CEE 7/17 plugs with special shape which are polarised when used with CEE 7/5 sockets (mechanically only).
3 Plug can only be inserted one way with French CEE 7/5, but lack of wiring convention means that the system is not ploarized.
4 Newer sockets can accept ungrounded Europlugs.

Multi-standard sockets

A standard grounded Thai outlet supporting European 2-pin plugs and earthed and unearthed American plugs, earthed and unearthed Australian plugs and Thai 3 pin plugs. Though this receptacle accepts standard US NEMA 1-15 or 5-15 plugs, the standard Thai voltage is 220 volts

Sockets that take a variety of plug types can be found in various countries where market size or local market conditions make a specific plug standard impractical to implement. These socket accept plugs fitting various European, Asian and North American standards. Since many plug standards are also associated with corresponding voltages, multi-standard sockets do not safeguard against devices being damaged by the wrong voltage. This forces users to be aware of the voltage requirements of their appliances as well as the prevailing local voltage. Devices designed to adapt automatically to whatever voltage and frequency is supplied, and which don't require grounding, are generally safe to use with these sockets.

These sockets have one or more ground holes to allow 3-pin plugs. On properly wired circuits, the ground contact may be actually grounded; however, as with most other forms of plugs, they are not immune to poor wiring. They may also not provide grounding to all types of plugs, as is the case of Schuko or French plugs where the grounding pin that mates with the plug is part of the socket rather than the plug.

Adapters

15 A version of BS 546 travel adapter

To facilitate travelers' use of personal electric devices, adapters are available to permit the interconnection of normally incompatible plugs and sockets. Such adapters overcome only the physical incompatibilities between plugs and sockets built to different standards; often a voltage converter is required for electrical compatibility.

Obsolete types

Old Spanish sockets

Left: Spanish three-pin plug and socket, with easily removable fuse
Right: An adapter to allow CEE 7/17 and CEE 7/4 plugs to be inserted

Some older industrial buildings in Spain used sockets that took a particular type of plug which was rated for higher current and had two flat contacts and a round ground pin, somewhat similar in design to the ones found on American plugs but larger in size.

The live and neutral measure 9 by 2 mm (0.354 by 0.079 in), and are 30 mm (1.181 in) apart. All three pins are 19 mm (0.748 in) long, and the earth pin is a cylinder of 4.8 mm (0.189 in) diameter.

While the plug resembles an American connector, the two flat contacts are much wider apart than on a standard American plug, which will therefore not fit in these sockets.

No domestic appliances were ever sold with these plugs.

UK electric clock connector

British electric clock connector, 3-pin made by MK. Showing the rear of the plug with its 2 A fuse. Different manufacturers' clock connectors were generally not compatible

Fused plugs and sockets of various proprietary and non-interchangeable types are found in older public buildings in the UK, where they are used to feed AC electric wall clocks. They are smaller than conventional socket outlets, commonly being made to fit BESA junction boxes, and are often of very low profile. Early types were available fused in both poles, later types fused in the live only and provided an earth pin. Most are equipped with a retaining screw or clip to prevent accidental disconnection. The prevalence of battery powered quartz controlled wall clocks has meant that this connector is rarely seen in new installations.

NEMA 1-15 style 5-receptacle outlet

Unusual American 5-receptacle NEMA 1-15 style outlet, ca. 1928

This is a very rare 5-way outlet from circa 1928, and is able to accept modern ungrounded polarized NEMA 1-15 plugs because the outlet itself is polarized. However, the outlet itself is still obsolete as the NEMA standard only provides for having at most 3 outlets from a single wallplate.

American 240 V "Australian" style

Left: American "Australian" style duplex outlet
Right: Compatibility of American and Australian 240 V plugs

The American electrical supply manufacturers Hubbell, Eagle, and possibly others made outlets and plugs that would match Australian plugs and sockets exactly. These American outlets date back to at least 1915 (as seen in US Patent 1,179,728 filed in 1915[33]), antedating the NEMA 5-15 sockets and plugs. They were meant for appliances that needed grounding (120 V at 15 amperes), and to be used in laundry rooms for washing machines and gas dryers (to power the motor). These did not become popular because NEMA 1-15 2-blade plugs would not fit.

Split current/voltage ratings

Many older North American receptacles have two different current and voltage ratings, most commonly 10 A 250 V/15 A 125 V. This has to do with a peculiarity of the National Electrical Code from 1923 to the 1950s. Originally, receptacles were rated at 10 A 250 V, because the NEC limited lighting circuits to 10 amperes. In 1923, the code changed to allow lighting circuits to be fused at 15 amperes; however, the old rule still applied to circuits over 125 volts.[34] The higher voltages were rarely used for lighting and appliances. Most receptacles with this rating are of the "T-slot" type. This type of rating was phased out in the 1950s, and finally abolished in the 1960s with the adoption of the current NEMA standards.

Pre-NEMA twist-lock devices can sometimes be found with split 250/600 V ratings. These are also obsolete.

US perpendicular outlet

Perpendicular slot duplex outlet
Perpendicular slot RP-2B outlet 10 A 42 V AC

Another obsolete outlet, made by Bryant, 125 V 15 A and 250 V 10 A rating. A NEMA 5–20 125 V 20 A or 6–15 250 V 15 A plug with a missing ground pin would fit this outlet, but a NEMA 2–20 plug is slightly too big to fit.

The upper slots as seen in the illustration connect to silver-colored wiring screws on the upper side, and the lower slots connect to brass-colored wiring screws on the lower side.

In Australia, the same or similar T-configuration sockets are used for DC power outlets, such as in stand-alone power systems (SAPS) or on boats.

In Soviet Union and now Russia this socket is commonly used for wiring in places where the voltage is lowered for safety purposes, like in schools, gas stations or in wet areas, rated 42 V 10 A AC. Such an unusual connection is intended specifically to make the connection of standard higher-voltage equipment impossible.

US Combination duplex outlet

Left: An extremely old "Nurpolian"-brand black parallel and tandem duplex outlet rated at 250 V 10 A (although this type was normally supplied with 120 V). Right: T-slot duplex outlet.

The parallel and tandem outlet accepts normal parallel NEMA 1–15 plugs and also tandem NEMA 2–15 plugs. Both pair of receptacles are fed internally by the same supply.

A more recent and fairly common version of this type is the T-slot outlet, in which the locations of the tandem and the parallel slots were combined to create T-shaped slots. This version also accepts normal parallel NEMA 1–15 plugs and also tandem NEMA 2–15 plugs. Incidentally, a NEMA 5–20 (125 V, 20 A), a NEMA 6-15 (250 V, 15 A) or 6–20 (250 V, 20 A) plug with a missing ground pin would fit this outlet. This type is no longer available in retail shops since the 1960s.

UK Dorman & Smith (D&S)

D&S Socket

The D&S plugs and sockets were rated at 13 amperes and were one of the early competing types for use on ring main circuits. They were never popular in private houses but were widely deployed in prefabricated houses and council housing. The BBC also used them. D&S supplied the sockets to local authorities at very low cost, with the intention of making money out of the sales of plugs typically priced at 4 times the price of a BS1363 plug. It is not known exactly when D&S ceased manufacturing the plugs and sockets but some local authorities continued to use them in new installations until the late 1950s. Many D&S sockets were still in use until the early 1980s, although the difficulty in obtaining plugs for them after around 1970 often forced their users to replace them with BS1363 sockets. This generally violated local authority regulations on alterations to council housing.[citation needed] The D&S plug suffered from a serious design fault: the live pin was a fuse which screwed into the plug body and tended to come unscrewed on its own in use. A fuse that worked loose could end up protruding from the socket, electrically live and posing a shock hazard, when the plug was removed.

UK Wylex Plug

Wylex 13A Plug

The Wylex plugs and sockets were produced by Wylex Electrical Supplies Ltd. as a competitor to the BS1363 and D&S sockets for use on ring main circuits. The plugs were available in both 5 A and 13 A versions, differing only by the widths of the live and neutral pins, and contained an internal fuse of the same rating as the plug. A plug had a central round earth pin and two flat pins, one on each side of the earth pin, for live and neutral. The two flat pins were slightly offset above and below the line cutting through the horizontal diameter of the earth pin. Wall sockets were rated at 13 amperes and took both 5 A and 13 A plugs. Many 13 A plugs had a socket on the back which took a 5 A plug, but would not take another 13 A plug because the slots for the live and neutral pins were narrower than those of the wall sockets, resulting in a stacked arrangement. Wylex sockets were used in council housing and public sector buildings, and for a short while in private housing. They were particularly popular in the Manchester area although they were installed throughout England, mainly in schools, university accommodation, and government laboratories. Wylex plugs and sockets continued to be manufactured for several years after BS1363 sockets became standard and were commonly used by banks and in computer rooms during the 1960s and 70s for uninterruptible power supplies or "clean" filtered mains supplies. It is not known exactly when Wylex ceased manufacturing its plugs and sockets; however plugs were available in electrical shops of the Manchester area until the mid 1980s.

Lampholder plug

Two Italian bypass lampholder plugs with Edison screw mount. Left: early type (porcelain and brass, circa 1930); right: late type (black plastic, circa 1970)

A lampholder plug fits into the bayonet cap or Edison screw socket of a lampholder in place of a light bulb and enables an electrical appliance to be powered from a wall or ceiling light fitting. They were commonly used during the 1920s to 1960s when wall sockets were scarce in many houses and often nonexistent in some of the rooms (bathrooms, cellars, attics, etc.). Also, as in some countries (like Italy) electricity was supplied on a "split tariff" basis with electricity for lighting being charged at a lower fare than that for other purposes, lampholder plugs enabled the consumers to reduce their electricity costs and were thus in broad use.

Lampholder plugs were and are rarely fused.

In the UK, lighting circuits are protected with a 5 A or 6 A fuse or circuit breaker.[35] Wiring regulations in the UK and some other countries no longer approve lampholder plugs because of the risks of overheating and fire.

Edison screw lampholder adaptors (for NEMA 1-15 plugs) are still easily found and commonly used in the Americas.

Old Greek sockets

Greek old earthed standard adaptor plugs and socket

Called "Tripoliki" (τριπολικές) the 3 Pin round standard similar to Swiss SEV 1011 and post-1989 Israeli/Thai type, virtually abandoned by 1995. Previous to the large-scale adoption of Schuko plugs, this was the only way to use an earthed appliance.

Unusual types

NEMA 2–15 and 2–20

These ungrounded plugs with two flat parallel blades are variants of the 1–15 but are intended to deliver 240 volts instead of 120. The 2–15 has coplanar current blades (rotated 90° from ordinary American plugs), and is used for 240 V service at 15 amperes, while the 2–20 has the two current prongs rotated 90° relative to each other (one vertical, one horizontal) and is used for 240 V service at 20 amperes. NEMA 2 plugs and sockets are rare because they have been prohibited for household use in the United States and Canada for several decades. They have no ground or neutral, and in some cases plugs can be inserted into incorrect-voltage sockets. Prior to the adoption of the NEMA standard, a plug nearly identical to the 2–20 was used for 120 V at 20 A. That obsolete plug would fit into 5–20 and 6–20 sockets, which supply different voltages, but the NEMA 2-20 plug is dimensionally incompatible.

Soviet adaptor plugs

Soviet adaptor plug

Some appliances sold in the Soviet Union had a flat unearthed plug with an additional pass-through socket on the top, allowing stacked arrangement of plugs. This design was very helpful (for the usual Soviet apartment of the 1960s had very few wall sockets), but completely unsafe, as the brass cylinders of the secondary socket were uncovered at the ends (to unscrew them easily), recessed only for 3 mm and provided bad contact because they relied on the secondary plug's bisected expanding pins. The pins of the secondary plug (without insulation sleeves) could not be inserted into the cylinders completely, and were accessible through a 5 mm gap between the primary and secondary plugs.

UK Walsall Gauge plug

Walsall Gauge 13 A plug (bottom) compared to regular BS 1363 plug

Unlike the standard BS 1363 plugs found in the UK, the earth pin is on a horizontal axis and the live and neutral pins on a vertical axis. This style of plug/socket was used by University laboratories (from batteries) and the BBC, and is still in use on parts of the London Underground for 220V DC voltage supply.

Italian Bticino brand Magic security connector

Left: Bticino Magic Security receptacle, detail.
Centre: assortment of Magic Security receptacles (in orange, the industrial three-phase type).
Right: assortment of Magic Security plugs.

This style of connector, produced by Italian brand Bticino, appeared in the 1960s and was intended as an alternative to the Europlug or CEI 23-16/VII connectors then in use.[36] The socket is an almost rectangular receptacle, with one or more lateral key pins and indents to prevent inverting the plug (it is polarised), or connecting plugs and sockets with different ampere ratings. At least four models were produced: three single-phase general purpose connectors rated respectively 10 A, 16 A and 20 A; plus a three-phase industrial connector rated 10 A; all of them have different key-pin positioning so plugs and sockets cannot be mismatched.[37] The socket is closed by a safety lid (bearing the word ‘’Magic’’ on it) which can be opened only with an even pressure on its surface, thus preventing the insertion of objects (except the plug itself) inside the socket. The contacts are blades positioned on both sides of the plug; the plug is energized only when it is inserted fully into the socket.

The obvious drawback of the system is that it is not compatible with Europlugs. As household appliances were never sold fitted with these security plugs and the use of adapters would defeat all of the newly introduced safety features, once this system is adopted all standard plugs must be cut off and replaced with the appropriate security connector. However, the Magic security system had some success at first because its enhanced safety features appealed to customers; standard connectors of the day were considered not safe enough.[36] The decline of the system occurred when safety lids similar to the Magic type were developed (VIMAR Sicury[38]) and then applied to standard sockets by third brands and by Bticino itself.

In Italy, the system was never definitively abandoned and, though rarely seen today, is still marked as available in Bticino’s products catalogue.[39]

In Chile, 10 A Magic connectors are commonly used for computer/laboratory power networks, as well as for communications or data equipment. This allows delicate electronics equipment to be connected to an independent circuit breaker, usually including a surge protector or an uninterruptible power supply backup. The different style of plug makes it more difficult for office workers to connect computer equipment to a standard unprotected power line, or to overload the UPS by connecting other office appliances.

In Iceland, Magic plugs were widely used in homes and businesses alongside Europlug and Schuko installations. Their installation in new homes was still quite common even in the late 1980s.

Single phase electric stove plugs and sockets

Power connector Legrand (400 V, 32 A)
Russian stove connectors rated for 250 V 25 A AC. Left: plug and socket. Center: Socket. Right: Plug.

The plugs and sockets used to power electric stoves from a single-phase line have to be rated for greater current values than ones for three-phase system because all the power has to be transferred through a single line. Electric stoves are often hardwired to the electrical supply system, connected to the mains with an appropriate high power industrial connector or with non-standard high power proprietary domestic connector (as some countries do not have wiring regulations for single-phase electric stoves). In Russia an electric stove can be often seen connected with an 25–32 amperes connector.

See also

References

  1. ^ IEC/TR 60083, Plugs and socket-outlets for domestic and similar general use standardized in member countries of IEC, International Electrotechnical Commission (2006)
  2. ^ Collins Essential English Dictionary 2nd Edition 2006: Power Point
  3. ^ Redesign of a power point socket
  4. ^ Hubbell (2009). "Hubbell History". Hubbell Incorporated. http://www.hubbell.com/Investor/History.aspx. Retrieved 2010-03-20. 
  5. ^ Witte. "The Automobile Storage Battery Its Care and Repair". www.powerstream.com. http://www.powerstream.com/1922/battery_1922_WITTE/battery_WITTE.htm. Retrieved 2007-09-14. 
  6. ^ Crist. "Socket Tutorial". www.mosaicshades.com. http://www.mosaicshades.com/antique2005/sockets/index.htm. Retrieved 2007-09-14. 
  7. ^ U.S. Patent 1,179,728
  8. ^ German patent number DE 370538
  9. ^ a b U.S. Patent 1,672,067
  10. ^ http://webstore.iec.ch/preview/info_iecee-cee-7%7Bed2.0%7Db.pdf IEC Webstore preview Retrieved 2011 Oct 19
  11. ^ a b c "Electric Current Abroad" (PDF). US Department of Commerce, International Trade Administration. 2002. http://www.ita.doc.gov/media/Publications/pdf/current2002FINAL.pdf. 
  12. ^ AS/NZS 3112:2004, Approval and test specification — Plugs and socket-outlets, Standards Australia and Standards New Zealand
  13. ^ "Australian Mains Plug Variants – AS/NZS 3112". Access Communications Pty Ltd. 2007-04-19. http://www.accesscomms.com.au/reference/AustMainsPlugVariants.htm. 
  14. ^ "Mains Plugs with Insulated Pins. Australian Standards AS/NZS3112:2000 & AS/NZS3112:2004 refer [sic"]. Access Communications Pty Ltd. 2007-04-19. http://www.accesscomms.com.au/reference/insulated-pins.htm. 
  15. ^ BS 4573 (1970), British Standard Specification for two-pin reversible plugs and shaver socket-outlets, British Standards Institution
  16. ^ BS 1363 (1995), 13 A plugs, socket-outlets and adaptors Specification for rewirable and non-rewirable 13 A fused plugs, British Standards Institute.
  17. ^ ГОСТ 7396.1-89
  18. ^ EN 50075 (1991), Specification for flat non-wirable two-pole plugs 2.5 A 250 V, with cord, for the connection of class II-equipment for household and similar purposes, European Committee for Standardization (CEN)
  19. ^ 5. udgave af Stærkstrømsbekendtgørelsen afsnit 107-2-D1 "Stikpropper og stikkontakter for danske systemer"
  20. ^ De Cesco G.: Acqua Luce Gas. Manuali pratici del far da sé. I Jolly bricolage. Fratelli Fabbri Editori, Milano, 1975. PP 56-57.
  21. ^ De Cesco G.: Acqua Luce Gas. Manuali pratici del far da sé. I Jolly bricolage. Fratelli Fabbri Editori, Milano, 1975. P 93.
  22. ^ De Cesco G.: Acqua Luce Gas. Manuali pratici del far da sé. I Jolly bricolage. Fratelli Fabbri Editori, Milano, 1975. PP 70-71.
  23. ^ La ricerca della sicurezza. Ma la ricerca continua. www.vimar.eu. Retrieved on 22 Jan 2009.
  24. ^ a b NEMA WD6, Dimensional requirements for plugs and receptacles
  25. ^ a b JIS C 8303-1993,Plugs and Receptacles for Domestic and Similar General Use,Japanese Standards Association (1993)
  26. ^ http://www.childoutletsafety.org/ Retrieved 2009 Jan 21
  27. ^ [1]
  28. ^ "International standardization of electrical plugs and sockets for domestic use". IEC. http://www.iec.ch/zone/plugsocket/ps_history.htm. 
  29. ^ NBR 14136:2002 – Plugues e tomadas para uso doméstico e análogo – Padronização (Plugs and socket-outlets for household use and similar purposes – Specification)
  30. ^ "Norma ABNT NBR 14136:2002" (in Portuguese). http://www.projetoderedes.com.br/artigos/artigo_norma_abnt_14136.php. 
  31. ^ "When Less is More...". http://www.crabtree.co.za/modules_fe/layout1/displayFullNews.asp?newsID=19. 
  32. ^ "SANS 164 standards: a working group perspective". http://www.eepublishers.co.za/images/upload/04%20G%20IT%20-%20SANS.pdf. 
  33. ^ http://patft.uspto.gov/netahtml/PTO/srchnum.htm and type in the patent number in the search box, then click "images"
  34. ^ Terrell Croft, Wiring for Light and Power, McGraw-Hill, 1924, pages 198–199
  35. ^ "Miniature Circuit Breakers". MK Electric. p. 4. http://www.mkelectric.co.uk/Documents/English/EN%20MK%20Technical%20Specifications/Circuit%20Protection/Miniatur%20Circuit%20Breaker.pdf. Retrieved 22 April 2010. 
  36. ^ a b De Cesco G.: Acqua Luce Gas. Manuali pratici del far da sé. I Jolly bricolage. Fratelli Fabbri Editori, Milano, 1975. P 73.
  37. ^ De Cesco G.: Acqua Luce Gas. Manuali pratici del far da sé. I Jolly bricolage. Fratelli Fabbri Editori, Milano, 1975. P 75.
  38. ^ La ricerca della sicurezza. Il brevetto Sicury www.vimar.eu. Retrieved on 12 Feb 2009.
  39. ^ Catalogo online. Installazione civile www.professionisti.bticino.it. Retrieved on 12 Feb 2009.

External links


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Industrial and multiphase power plugs and sockets — Industrial and multiphase plugs and sockets provide a connection to the electrical mains rated at higher voltages and currents than household plugs and sockets. They are generally used when more than two current carrying conductors (polyphase… …   Wikipedia

  • Power strip — Power bar redirects here. For the manufacturer of energy food products, see PowerBar. French/Belgian power strip A power strip (also known as an extension block, power board and by many other variations) is a block of electrical sockets that… …   Wikipedia

  • Power point (disambiguation) — Power Point or Powerpoint frequently refers to Microsoft PowerPoint, a presentation software program, but may also refer to:*Domestic AC power plugs and sockets *Power Points from the Pokémon series *As a synonym for magic point, used in role… …   Wikipedia

  • Power cable — This article is about electric power conductors. For portable equipment, see power cord. A power cable is an assembly of two or more electrical conductors, usually held together with an overall sheath. The assembly is used for transmission of… …   Wikipedia

  • Common electrical adaptors in Hong Kong and the United Kingdom — This page covers electrical adaptors that are common in the UK, as well as regions where British wiring is in use, such as Hong Kong. Modern British adaptors should always have shutters over the live and neutral holes. Whilst the lack of shutters …   Wikipedia

  • Common electrical plug and socket problems in Hong Kong — This article exists to give readers an insight into some problems regarding electrical plugs and sockets in Hong Kong.OverviewBS 1363 is the mainstream wiring system in Hong Kong. In old buildings, the BS 546 system is also common. Due to its… …   Wikipedia

  • Mains power systems — This article includes a list of countries and territories, with the plugs, voltages and frequencies they use for providing electrical power to small appliances and some major appliances. For definitions of terms and further information on each… …   Wikipedia

  • Gender of connectors and fasteners — A male threaded pipe, left, and female threaded elbow. In electrical and mechanical trades and manufacturing, each half of a pair of mating connectors or fasteners is conventionally assigned the designation male or female. The female connector is …   Wikipedia

  • Coaxial power connector — Most common coaxial power connector, male and female, 5.5 x 2.5 mm …   Wikipedia

  • Three-phase electric power — This article deals with where, how and why three phase is used. For information on the basic mathematics and principles of three phase, see three phase. Three phase electric power is a common method of alternating current electric power… …   Wikipedia


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.