A computer file is a block of arbitrary information, or resource for storing information, which is available to a computer program and is usually based on some kind of durable storage. A file is durable in the sense that it remains available for programs to use after the current program has finished. Computer files can be considered as the modern counterpart of paper documents which traditionally are kept in offices' and libraries' files, and this is the source of the term.
The word "file" was used publicly in the context of computer storage as early as February, 1950. In an RCA (Radio Corporation of America) advertisement in Popular Science Magazine describing a new "memory" vacuum tube it had developed, RCA stated:
- "...the results of countless computations can be kept "on file" and taken out again. Such a "file" now exists in a "memory" tube developed at RCA Laboratories. Electronically it retains figures fed into calculating machines, holds them in storage while it memorizes new ones - speeds intelligent solutions through mazes of mathematics."
In 1952 "file" was used in referring to information stored on punched cards. In early usage people regarded the underlying hardware (rather than the contents) as the file. For example, the IBM 350 disk drives were called "disk files". Systems like the Compatible Time-Sharing System introduced the concept of a file system, which managed several virtual "files" on one storage device, giving the term its present-day meaning. File names in CTSS had two parts, a user-readable "primary name" and a "secondary name" indicating the file type. This convention remains in use by several operating systems today, including Microsoft Windows. Although the current term "register file" shows the early concept of files, it has largely disappeared.
On most modern operating systems, files are organized into one-dimensional arrays of bytes. The format of a file is defined by its content since a file is solely a container for data, although, on some platforms the format is usually indicated by its file extension, specifying the rules for how the bytes must be organized and interpreted meaningfully. For example, the bytes of a plain text file (.txt in Windows) are associated with either ASCII or UTF-8 characters, while the bytes of image, video, and audio files are interpreted otherwise. Most files also allocate a few bytes for metadata which allows a file to remember some basic information about itself.
At any instant in time, a file might have a size, normally expressed as number of bytes, that indicates how much storage is associated with the file. In most modern operating systems the size can be any non-negative whole number of bytes up to a system limit. However, the general definition of a file does not require that its instant size has any real meaning, unless the data within the file happens to correspond to data within a pool of persistent storage. A special case is a zero byte file; these files are either an accident (a result of an aborted disk operation) or serve as some kind of flag in the file system.
For example, the file to which the link /bin/ls points in a typical Unix-like system probably has a defined size that seldom changed. Compare this with /dev/null which is also a file, but its size may be obscure.
Organizing the data in a file
Information in a computer file can consist of smaller packets of information (often called "records" or "lines") that are individually different but share some trait in common. For example, a payroll file might contain information concerning all the employees in a company and their payroll details; each record in the payroll file concerns just one employee, and all the records have the common trait of being related to payroll—this is very similar to placing all payroll information into a specific filing cabinet in an office that does not have a computer. A text file may contain lines of text, corresponding to printed lines on a piece of paper. Alternatively, a file may contain an arbitrary binary image (a BLOB) or it may contain an executable.
The way information is grouped into a file is entirely up to how it is designed. This has led to a plethora of more or less standardized file structures for all imaginable purposes, from the simplest to the most complex. Most computer files are used by computer programs which create, modify or delete the files for their own use on an as-needed basis. The programmers who create the programs decide what files are needed, how they are to be used and (often) their names.
In some cases, computer programs manipulate files that are made visible to the computer user. For example, in a word-processing program, the user manipulates document files that the user personally names. Although the content of the document file is arranged in a format that the word-processing program understands, but the user is able to choose the name and location of the file and provide the bulk of the information (such as words and text) that will be stored in the file.
Many applications pack all their data files into a single file called archive file, using internal markers to discern the different types of information contained within. The benefits of the archive file are to lower the number of files for easier transfer, to reduce storage usage, or just to organize outdated files. The archive file must often be unpacked before next using.
At the most basic level there are only two types of file operations; read and write. For example: adding text to a document involves; opening the file (read), inputting the text and saving the file (write)
Files on a computer can be created, moved, modified, grown, shrunk and deleted. In most cases, computer programs that are executed on the computer handle these operations, but the user of a computer can also manipulate files if necessary. For instance, Microsoft Word files are normally created and modified by the Microsoft Word program in response to user commands, but the user can also move, rename, or delete these files directly by using a file manager program such as Windows Explorer (on Windows computers).
In Unix-like systems, user-space processes do not normally deal with files at all; the operating system provides a level of abstraction which means that almost all interaction with files from user-space is through hard links. Hard links allow a name to be associated with a file (or they can be anonymous - and therefore temporary); files do not have names in the OS. For example, a user-space program cannot delete a file; it can delete a link to a file (for example, using the shell commands rm or mv or, in the anonymous case, simply by exiting), and if the kernel determines that there are no more existing hard links to the file (symbolic links will simply fail to resolve), it may then allow the memory location for the deleted file to be allocated for another file. Because Unix-like systems only delete the pointer to the file the data remains intact on disk, this creates what is known as free space, which is commonly considered a security risk due to the existence of file recovery software. Such a risk has given rise to the secure deletion programs such as srm. In fact, it really is only the kernel that deals with files, but it serves to handle all user-space interaction with (virtual) files in a manner that is transparent to the user-space programs
Although the way programs manipulate files varies according to the operating system and file system involved, the following operations are typical:
- Creating a file with a given name
- Setting attributes that control operations on the file
- Opening a file to use its contents
- Reading or updating the contents
- Committing updated contents to durable storage
- Closing the file, thereby losing access until it is opened again
Identifying and organizing files
In modern computer systems, files are typically accessed using names (filenames). In some operating systems, the name is associated with the file itself. In others, the file is anonymous, and is pointed to by links that have names. In the latter case, a user can identify the name of the link with the file itself, but this is a false analogue, especially where there exists more than one link to the same file.
Files (or links to files) can be located in directories. However, more generally, a directory can contain either a list of files or a list of links to files. Within this definition, it is of paramount importance that the term "file" includes directories. This permits the existence of directory hierarchies, i.e., directories containing sub-directories. A name that refers to a file within a directory must be typically unique. In other words, there must be no identical names within a directory. However, in some operating systems, a name may include a specification of type that means a directory can contain an identical name for more than one type of object such as a directory and a file.
In environments in which a file is named, a file's name and the path to the file's directory must uniquely identify it among all other files in the computer system—no two files can have the same name and path. Where a file is anonymous, named references to it will exist within a namespace. In most cases, any name within the namespace will refer to exactly zero or one file. However, any file may be represented within any namespace by zero, one or more names.
Any string of characters may or may not be a well-formed name for a file or a link depending upon the context of application. Whether or not a name is well-formed depends on the type of computer system being used. Early computers permitted only a few letters or digits in the name of a file, but modern computers allow long names (some up to 255 characters) containing almost any combination of unicode letters or unicode digits, making it easier to understand the purpose of a file at a glance. Some computer systems allow file names to contain spaces; others do not. Case-sensitivity of file names is determined by the file system. Unix file systems are usually case sensitive and allow user-level applications to create files whose names differ only in the case of characters. Microsoft Windows supports multiple file systems, each with different policies regarding case-sensitivity. The common FAT file system can have multiple files whose names differ only in case if the user uses a disk editor to edit the file names in the directory entries. User applications, however, will usually not allow the user to create multiple files with the same name but differing in case.
Most computers organize files into hierarchies using folders, directories, or catalogs. The concept is the same irrespective of the terminology used. Each folder can contain an arbitrary number of files, and it can also contain other folders. These other folders are referred to as subfolders. Subfolders can contain still more files and folders and so on, thus building a tree-like structure in which one "master folder" (or "root folder" — the name varies from one operating system to another) can contain any number of levels of other folders and files. Folders can be named just as files can (except for the root folder, which often does not have a name). The use of folders makes it easier to organize files in a logical way.
When a computer allows the use of folders, each file and folder has not only a name of its own, but also a path, which identifies the folder or folders in which a file or folder resides. In the path, some sort of special character—such as a slash—is used to separate the file and folder names. For example, in the illustration shown in this article, the path /Payroll/Salaries/Managers uniquely identifies a file called Managers in a folder called Salaries, which in turn is contained in a folder called Payroll. The folder and file names are separated by slashes in this example; the topmost or root folder has no name, and so the path begins with a slash (if the root folder had a name, it would precede this first slash).
Many (but not all) computer systems use extensions in file names to help identify what they contain, also known as the file type. On Windows computers, extensions consist of a dot (period) at the end of a file name, followed by a few letters to identify the type of file. An extension of .txt identifies a text file; a .doc extension identifies any type of document or documentation, commonly in the Microsoft Word file format; and so on. Even when extensions are used in a computer system, the degree to which the computer system recognizes and heeds them can vary; in some systems, they are required, while in other systems, they are completely ignored if they are presented.
Many modern computer systems provide methods for protecting files against accidental and deliberate damage. Computers that allow for multiple users implement file permissions to control who may or may not modify, delete, or create files and folders. For example, a given user may be granted only permission to read a file or folder, but not to modify or delete it; or a user may be given permission to read and modify files or folders, but not to execute them. Permissions may also be used to allow only certain users to see the contents of a file or folder. Permissions protect against unauthorized tampering or destruction of information in files, and keep private information confidential from unauthorized users.
Another protection mechanism implemented in many computers is a read-only flag. When this flag is turned on for a file (which can be accomplished by a computer program or by a human user), the file can be examined, but it cannot be modified. This flag is useful for critical information that must not be modified or erased, such as special files that are used only by internal parts of the computer system. Some systems also include a hidden flag to make certain files invisible; this flag is used by the computer system to hide essential system files that users should not alter.
The discussion above describes a file as a concept presented to a user or a high-level operating system. However, any file that has any useful purpose, outside of a thought experiment, must have some physical manifestation. That is, a file (an abstract concept) in a real computer system must have a real physical analogue if it is to exist at all.
In physical terms, most computer files are stored on some type of data storage device. For example, there is a hard disk, from which most operating systems run and on which most store their files. Hard disks have been the ubiquitous form of non-volatile storage since the early 1960s.  Where files contain only temporary information, they may be stored in RAM. Computer files can be also stored on other media in some cases, such as magnetic tapes, compact discs, Digital Versatile Discs, Zip drives, USB flash drives, etc.
In Unix-like operating systems, many files have no direct association with a physical storage device: /dev/null is a prime example, as are just about all files under /dev, /proc and /sys. These can be accessed as files in user space. They are really virtual files that exist, in reality, as objects within the operating system kernel.
Backing up files
When computer files contain information that is extremely important, a back-up process is used to protect against disasters that might destroy the files. Backing up files simply means making copies of the files in a separate location so that they can be restored if something happens to the computer, or if they are deleted accidentally.
There are many ways to back up files. Most computer systems provide utility programs to assist in the back-up process, which can become very time-consuming if there are many files to safeguard. Files are often copied to removable media such as writable CDs or cartridge tapes. Copying files to another hard disk in the same computer protects against failure of one disk, but if it is necessary to protect against failure or destruction of the entire computer, then copies of the files must be made on other media that can be taken away from the computer and stored in a safe, distant location.
The grandfather-father-son backup method automatically makes three back ups, the grandfather file is the oldest copy of the file and the son is the current copy.
File systems and file managers
The way a computer organizes, names, stores and manipulates files is globally referred to as its file system. Most computers have at least one file system. Some computers allow the use of several different file systems. For instance, on newer MS Windows computers, the older FAT-type file systems of MS-DOS and old versions of Windows are supported, in addition to the NTFS file system that is the normal file system for recent versions of Windows. Each system has its own advantages and disadvantages. Standard FAT allows only eight-character file names (plus a three-character extension) with no spaces, for example, whereas NTFS allows much longer names that can contain spaces. You can call a file "Payroll records" in NTFS, but in FAT you would be restricted to something like payroll.dat (unless you were using VFAT, a FAT extension allowing long file names).
File manager programs are utility programs that allow users to manipulate files directly. They allow you to move, create, delete and rename files and folders, although they do not actually allow you to read the contents of a file or store information in it. Every computer system provides at least one file-manager program for its native file system. Under Windows, the most commonly used file manager program is Windows Explorer.
- Block (data storage)
- Computer file management
- Data hierarchy
- File Camouflage
- File copying
- File deletion
- File directory
- File manager
- File name
- File size
- File system
- Flat file database
- Object composition
- Soft copy
- ^ Popular Science Magazine, February 1950, page 96
- ^ Robert S. Casey, et al. Punched Cards: Their Applications to Science and Industry, 1952.
- ^ Martin H. Weik. Ballistic Research Laboratories Report #1115. March 1961. pp. 314-331.
- ^ Fernando J. Corbató et al. "An Experimental Time-Sharing System." May 3, 1962.
- ^ Jerome H. Saltzer CTSS Technical Notes. Project MIT-LCS-TR016
- ^ Magnetic Storage Handbook 2nd Ed., Section 2.1.1, Disk File Technology, Mee and Daniel, (c)1990,
Wikimedia Foundation. 2010.
Look at other dictionaries:
computer file — noun (computer science) a file maintained in computer readable form • Topics: ↑computer science, ↑computing • Hypernyms: ↑file, ↑data file • Hyponyms: ↑ … Useful english dictionary
computer file — /kəm pju:tə faɪl/ noun a section of information on a computer, e.g. the payroll, list of addresses, or customer accounts … Marketing dictionary in english
computer file — /kəm pju:tə faɪl/ noun a section of information on a computer, e.g. the payroll, list of addresses or list of customer accounts … Dictionary of banking and finance
Computer file management — The term computer file management refers to the manipulation of documents and data in files on a computer. Specifically, one may create a new file or edit an existing file and save it; open or load a pre existing file into memory; or close a file … Wikipedia
computer file name — noun (computer science) the name given to a computer file in order to distinguish it from other files; may contain an extension that indicates the type of file • Syn: ↑filename, ↑file name, ↑computer filename • Topics: ↑computer science,… … Useful english dictionary
File locking — is a mechanism that enforces access to a computer file by only one user or process at any specific time. The purpose of locking is to prevent the classic interceding update scenario. The interceding update problem may be illustrated as in the… … Wikipedia
File (Unix) — file is a standard Unix program for determining the type of data contained in a computer file. History The original version of file originated in Unix Research Version 4 [See [http://www.darwinsys.com/file/file v4.1.txt] this copy of the UNIX V4… … Wikipedia
File — has several meanings:* Filing cabinet * File (tool) * A nail file * Filing (legal) * Filing (manufacturing process) * File (formation) Military term for a single column of men one in front of the other. See also Rank (formation) * File (chess) *… … Wikipedia
File verification — is the process of using an algorithm for verifying the integrity or authenticity of a computer file. This can be done by comparing two files bit by bit, but requires two copies of the same file, and may miss systematic corruptions which might… … Wikipedia
File size — measures the size of a computer file. Typically it is measured in bytes with a prefix. The actual amount of disk space consumed by the file depends on the file system. The maximum file size a file system supports depends on the number of bits… … Wikipedia