Potential flow

In fluid dynamics, potential flow describes the velocity field as the gradient of a scalar function: the velocity potential. As a result, a potential flow is characterized by an irrotational velocity field, which is a valid approximation for several applications. The irrotationality of a potential flow is due to the curl of a gradient always being equal to zero.
In the case of an incompressible flow the velocity potential satisfies Laplace's equation, and potential theory is applicable. However, potential flows also have been used to describe compressible flows. The potential flow approach occurs in the modeling of both stationary as well as nonstationary flows.
Applications of potential flow are for instance: the outer flow field for aerofoils, water waves, electroosmotic flow, and groundwater flow. For flows (or parts thereof) with strong vorticity effects, the potential flow approximation is not applicable.
Contents
Characteristics and applications
Description and characteristics
In fluid dynamics, a potential flow is described by means of a velocity potential φ, being a function of space and time. The flow velocity v is a vector field equal to the gradient, ∇, of the velocity potential φ:^{[1]}
Sometimes, also the definition v = −∇φ, with a minus sign, is used. But here we will use the definition above, without the minus sign. From vector calculus it is known, that the curl of a gradient is equal to zero:^{[1]}
and consequently the vorticity, the curl of the velocity field v, is zero:^{[1]}
This implies that a potential flow is an irrotational flow. This has direct consequences for the applicability of potential flow. In flow regions where vorticity is known to be important, such as wakes and boundary layers, potential flow theory is not able to provide reasonable predictions of the flow.^{[2]} Fortunately, there are often large regions of a flow where the assumption of irrotationality is valid, which is why potential flow is used for various applications. For instance in: flow around aircraft, groundwater flow, acoustics, water waves, and electroosmotic flow.^{[3]}
Incompressible flow
In case of an incompressible flow — for instance of a liquid, or a gas at low Mach numbers; but not for sound waves — the velocity v has zero divergence:^{[1]}
with the dot denoting the inner product. As a result, the velocity potential φ has to satisfy Laplace's equation^{[1]}
where is the Laplace operator (sometimes also written Δ). In this case the flow can be determined completely from its kinematics: the assumptions of irrotationality and zero divergence of the flow. Dynamics only have to be applied afterwards, if one is interested in computing pressures: for instance for flow around airfoils through the use of Bernoulli's principle.
In two dimensions, potential flow reduces to a very simple system that is analyzed using complex analysis (see below).
Compressible flow
Steady flow
Potential flow theory can also be used to model irrotational compressible flow. The full potential equation, describing a steady flow, is given by:^{[4]}
with Mach number components
 and
where a is the local speed of sound. The flow velocity v is again equal to ∇Φ, with Φ the velocity potential. The full potential equation is valid for sub, trans and supersonic flow at arbitrary angle of attack, as long as the assumption of irrotationality is applicable.^{[4]}
In case of either subsonic or supersonic (but not transsonic or hypersonic) flow, at small angles of attack and thin bodies, an additional assumption can be made: the velocity potential is split into an undisturbed onflow velocity V_{∞} in the xdirection, and small a perturbation velocity ∇φ thereof. So:^{[4]}
In that case, the linearized smallperturbation potential equation — an approximation to the full potential equation — can be used:^{[4]}
with M_{∞} = V_{∞} / a_{∞} the Mach number of the incoming free stream. This linear equation is much easier to solve than the full potential equation: it may be recast into Laplace's equation by a simple coordinate stretching in the xdirection.
Derivation of the full potential equation For a steady inviscid flow, the Euler equations — for the mass and momentum density — are, in subscript notation and in nonconservation form:^{[5]} while using the summation convention: since j occurs more than once in the term on the left hand side of the momentum equation, j is summed over all its components (which is from j=1 to 2 in twodimensional flow, and from j=1 to 3 in three dimensions). Further:
 ρ is the fluid density,
 p is the pressure,
 (x_{1},x_{2},x_{3}) = (x,y,z) are the coordinates and
 (v_{1},v_{2},v_{3}) are the corresponding components of the velocity vector v.
The speed of sound squared a^{2} is equal to the derivative of the pressure p with respect to the density ρ, at constant entropy S:^{[6]}
As a result, the flow equations can be written as:
 and
Multiplying (and summing) the momentum equation with v_{i}, and using the mass equation to eliminate the density gradient gives:
When divided by ρ, and with all terms on one side of the equation, the compressible flow equation is:
Note that until this stage, no assumptions have been made regarding the flow (besides that it is a steady flow).
Now, for irrotational flow the velocity v is the gradient of the velocity potential Φ, and the local Mach number components M_{i} are defined as:
 and
When used in the flow equation, the full potential equation results:
Written out in components, the form given at the beginning of this section is obtained. When a specific equation of state is provided, relating pressure p and density ρ, the speed of sound can be determined. Subsequently, together with adequate boundary conditions, the full potential equation can be solved (most often through the use of a computational fluid dynamics code).
Sound waves
Smallamplitude sound waves can be approximated with the following potentialflow model:^{[7]}
which is a linear wave equation for the velocity potential φ. Again the oscillatory part of the velocity vector v is related to the velocity potential by v = ∇φ, while as before Δ is the Laplace operator, and ā is the average speed of sound in the homogeneous medium. Note that also the oscillatory parts of the pressure p and density ρ each individually satisfy the wave equation, in this approximation.
Applicability and limitations
Potential flow does not include all the characteristics of flows that are encountered in the real world. For example, potential flow excludes turbulence, which is commonly encountered in nature. Also, potential flow theory cannot be applied for viscous internal flows.^{[2]} Richard Feynman considered potential flow to be so unphysical that the only fluid to obey the assumptions was "dry water".^{[8]}
Incompressible potential flow also makes a number of invalid predictions, such as d'Alembert's paradox, which states that the drag on any object moving through an infinite fluid otherwise at rest is zero.^{[9]}
More precisely, potential flow cannot account for the behaviour of flows that include a boundary layer.^{[2]}
Nevertheless, understanding potential flow is important in many branches of fluid mechanics. In particular, simple potential flows (called elementary flows) such as the free vortex and the point source possess ready analytical solutions. These solutions can be superposed to create more complex flows satisfying a variety of boundary conditions. These flows correspond closely to reallife flows over the whole of fluid mechanics; in addition, many valuable insights arise when considering the deviation (often slight) between an observed flow and the corresponding potential flow.
Potential flow finds many applications in fields such as aircraft design. For instance, in computational fluid dynamics, one technique is to couple a potential flow solution outside the boundary layer to a solution of the boundary layer equations inside the boundary layer.
The absence of boundary layer effects means that any streamline can be replaced by a solid boundary with no change in the flow field, a technique used in many aerodynamic design approaches. Another technique would be the use of Riabouchinsky solids.^{[dubious – discuss]}
Analysis for twodimensional flow
Main article: Conformal mappingPotential flow in two dimensions is simple to analyze using conformal mapping, by the use of transformations of the complex plane. However, use of complex numbers is not required, as for example in the classical analysis of fluid flow past a cylinder. It is not possible to solve a potential flow using complex numbers in three dimensions.^{[10]}
The basic idea is to use a holomorphic (also called analytic) or meromorphic function f, which maps the physical domain (x,y) to the transformed domain (φ,ψ). While x, y, φ and ψ are all real valued, it is convenient to define the complex quantities
 and
Now, if we write the mapping f as^{[10]}
 or
Then, because f is a holomorphic or meromorphic function, it has to satisfy the CauchyRiemann equations^{[10]}
The velocity components (u,v), in the (x,y) directions respectively, can be obtained directly from f by differentiating with respect to z. That is^{[10]}
So the velocity field v = (u,v) is specified by^{[10]}
Both φ and ψ then satisfy Laplace's equation:^{[10]}
 and
So φ can be identified as the velocity potential and ψ is called the stream function.^{[10]} Lines of constant ψ are known as streamlines and lines of constant φ are known as equipotential lines (see equipotential surface).
Streamlines and equipotential lines are orthogonal to each other, since^{[10]}
Thus the flow occurs along the lines of constant ψ and at right angles to the lines of constant φ.^{[10]}
It is interesting to note that Δψ = 0 is also satisfied, this relation being equivalent to ∇×v = 0. So the flow is irrotational. The automatic condition ∂^{2}Ψ /( ∂x ∂y) = ∂^{2}Ψ /( ∂y ∂x) then gives the incompressibility constraint ∇·v = 0.
Examples of twodimensional potential flows
General considerations
Any differentiable function may be used for f. The examples that follow use a variety of elementary functions; special functions may also be used.
Note that multivalued functions such as the natural logarithm may be used, but attention must be confined to a single Riemann surface.
Power laws
Examples of conformal maps for the power law w = A z^{n}, for different values of the power n. Shown is the zplane, showing lines of constant potential φ and streamfunction ψ, while w = φ + iψ. In case the following powerlaw conformal map is applied, from z = x+iy to w = φ+iψ:^{[11]}
then, writing z in polar coordinates as z = x + iy = re^{iθ}, we have^{[11]}
 and
In the figures to the right examples are given for several values of n. The black line is the boundary of the flow, while the darker blue lines are streamlines, and the lighter blue lines are equipotential lines. Some interesting powers n are:^{[11]}
 n = ½ : this corresponds with flow around a semiinfinite plate,
 n = ⅔ : flow around a right corner,
 n = 1 : a trivial case of uniform flow,
 n = 2 : flow through a corner, or near a stagnation point, and
 n = 1 : flow due to a source doublet
The constant A is a scaling parameter: its absolute value A determines the scale, while its argument arg{A} introduces a rotation (if nonzero).
Power laws with n = 1: uniform flow
If w = Az^{1}, that is, a power law with n = 1, the streamlines (i.e. lines of constant ψ) are a system of straight lines parallel to the xaxis. This is easiest to see by writing in terms of real and imaginary components:
thus giving φ = Ax and ψ = Ay. This flow may be interpreted as uniform flow parallel to the xaxis.
Power laws with n = 2
If n = 2, then w = Az^{2} and the streamline corresponding to a particular value of ψ are those points satisfying
which is a system of rectangular hyperbolae. This may be seen by again rewriting in terms of real and imaginary components. Noting that and rewriting sin θ = y / r and cos θ = x / r it is seen (on simplifying) that the streamlines are given by
The velocity field is given by , or
In fluid dynamics, the flowfield near the origin corresponds to a stagnation point. Note that the fluid at the origin is at rest (this follows on differentiation of f(z) = z^{2} at z = 0).
The ψ = 0 streamline is particularly interesting: it has two (or four) branches, following the coordinate axes, i.e. x = 0 and y = 0.
As no fluid flows across the xaxis, it (the xaxis) may be treated as a solid boundary. It is thus possible to ignore the flow in the lower halfplane where y < 0 and to focus on the flow in the upper halfplane.
With this interpretation, the flow is that of a vertically directed jet impinging on a horizontal flat plate.
The flow may also be interpreted as flow into a 90 degree corner if the regions specified by (say) x < 0 and y < 0 are ignored.
Power laws with n = 3
If n = 3, the resulting flow is a sort of hexagonal version of the n = 2 case considered above. Streamlines are given by, ψ = 3x^{2}y − y^{3} and the flow in this case may be interpreted as flow into a 60 degree corner.
Power laws with n = −1: doublet
If , the streamlines are given by
This is more easily interpreted in terms of real and imaginary components:
Thus the streamlines are circles that are tangent to the xaxis at the origin. The circles in the upper halfplane thus flow clockwise, those in the lower halfplane flow anticlockwise. Note that the velocity components are proportional to r ^{− 2}; and their values at the origin is infinite. This flow pattern is usually referred to as a doublet and can be interpreted as the combination of sourcesink pair of infinite strength kept at an infinitesimally small distance apart.
The velocity field is given by
or in polar coordinates:
Power laws with n = −2: quadrupole
If , the streamlines are given by
This is the flow field associated with a quadrupole.^{[citation needed]}
See also
 Stream function
 Laplacian field
 Conformal mapping
 Flownet
 Velocity potential
 Aerodynamic Potential Flow Codes
Notes
 ^ ^{a} ^{b} ^{c} ^{d} ^{e} Batchelor (1973) pp. 99–101.
 ^ ^{a} ^{b} ^{c} Batchelor (1973) pp. 378–380.
 ^ Kirby, B.J. (2010), Micro and Nanoscale Fluid Mechanics: Transport in Microfluidic Devices., Cambridge University Press, ISBN 9780521119030, http://www.kirbyresearch.com/textbook
 ^ ^{a} ^{b} ^{c} ^{d} Anderson, J.D. (2002), Modern compressible flow, McGrawHill, ISBN 0072424435, pp. 358–359.
 ^ Lamb (1994) §6–§7, pp. 3–6.
 ^ Batchelor (1973) p. 161.
 ^ Lamb (1994) §287, pp. 492–495.
 ^ Feynman, R.P.; Leighton, R.B.; Sands, M. (1964), The Feynman Lectures on Physics, 2, AddisonWesley, p. 403. Chapter 40 has the title: The flow of dry water.
 ^ Batchelor (1973) pp. 404–405.
 ^ ^{a} ^{b} ^{c} ^{d} ^{e} ^{f} ^{g} ^{h} ^{i} Batchelor (1973) pp. 106–108.
 ^ ^{a} ^{b} ^{c} Batchelor (1973) pp. 409–413.
References
 Batchelor, G.K. (1973), An introduction to fluid dynamics, Cambridge University Press, ISBN 0521098173
 Chanson, H. (2009), Applied Hydrodynamics: An Introduction to Ideal and Real Fluid Flows, CRC Press, Taylor & Francis Group, Leiden, The Netherlands, 478 pages, ISBN 9780415492713, http://espace.library.uq.edu.au/view/UQ:191112
 Lamb, H. (1994) [1932], Hydrodynamics (6th ed.), Cambridge University Press, ISBN 9780521458689
 MilneThomson, L.M. (1996) [1968], Theoretical hydrodynamics (5th ed.), Dover, ISBN 0486689700
Further reading
 Chanson, H. (2007), "Le potentiel de vitesse pour les écoulements de fluides réels: la contribution de JosephLouis Lagrange [Velocity potential in real fluid flows: JosephLouis Lagrange's contribution]", La Houille Blanche (5): 127–131, doi:10.1051/lhb:2007072, http://espace.library.uq.edu.au/view/UQ:119883 (French)
 Wehausen, J.V.; Laitone, E.V. (1960), "Surface waves", in Flügge, S.; Truesdell, C., Encyclopedia of Physics, IX, Springer Verlag, pp. 446–778, http://www.coe.berkeley.edu/SurfaceWaves
External links
 "Irrotational flow of an inviscid fluid". University of Genoa, Faculty of Engineering. http://www.diam.unige.it/~irro/lecture_e.html. Retrieved 20090329.
 "Conformal Maps Gallery". 3DXplorMath. http://3dxplormath.org/j/applets/en/index.html. Retrieved 20090329. — Java applets for exploring conformal maps
Categories:
Wikimedia Foundation. 2010.
Look at other dictionaries:
potential flow — Irrotational flow occurring in a conservative force field or potential field [16] … Lexicon of Cave and Karst Terminology
Aerodynamic potential flow code — Aerodynamic potential flow or panel codes are used to determine the velocity and subsequently the pressure distribution on an object. This may be a simple two dimensional object, such as a circle or wing and it may be a three dimensional vehicle … Wikipedia
Potential vorticity — (PV) is a quantity which is proportional to the dot product of vorticity and stratification that, following a parcel of air or water, can only be changed by diabatic or frictional processes. It is a useful concept for understanding the generation … Wikipedia
Flow measurement — is the quantification of bulk fluid movement. Flow can be measured in a variety of ways. Positive displacement flow meters acumulate a fixed volume of fluid and then count the number of times the volume is filled to measure flow. Other flow… … Wikipedia
Potential temperature — The potential temperature of a parcel of fluid at pressure P is the temperature that the parcel would acquire if adiabatically brought to a standard reference pressure P {0}, usually 1000 millibars. The potential temperature is denoted heta and,… … Wikipedia
Flow cytometry — Analysis of a marine sample of photosynthetic picoplankton by flow cytometry showing three different populations (Prochlorococcus, Synechococcus, and picoeukaryotes) Flow cytometry (abbreviated: FCM) is a technique for counting and examining… … Wikipedia
Potential density — The potential density of a fluid parcel at pressure P is the density that the parcel would acquire if adiabatically brought to a reference pressure P {0}, often 1 bar (100 kPa). Whereas density changes with changing pressure, potential density of … Wikipedia
Flow velocity — In fluid dynamics the flow velocity, or velocity field, of a fluid is a vector field which is used to mathematically describe the motion of a fluid.DefinitionThe flow velocity of a fluid is a vector field: mathbf{u}=mathbf{u}(mathbf{x},t)which… … Wikipedia
Flow battery — A flow battery is a form of rechargeable battery in which electrolyte containing one or more dissolved electroactive species flows through a power cell / reactor that converts chemical energy to electricity. Additional electrolyte is stored… … Wikipedia
Flowbased programming — In computer science, flow based programming (FBP) is a programming paradigm that defines applications as networks of black box processes, which exchange data across predefined connections by message passing. These black box processes can be… … Wikipedia