Countable set

"Countable" redirects here. For the linguistic concept, see Count noun.Not to be confused with (recursively) enumerable sets.
In mathematics, a countable set is a set with the same cardinality (number of elements) as some subset of the set of natural numbers. A set that is not countable is called uncountable. The term was originated by Georg Cantor. The elements of a countable set can be counted one at a time—although the counting may never finish, every element of the set will eventually be associated with a natural number.
Some authors use countable set to mean a set with the same cardinality as the set of natural numbers.^{[1]} The difference between the two definitions is that under the former, finite sets are also considered to be countable, while under the latter definition, they are not considered to be countable. To resolve this ambiguity, the term at most countable is sometimes used for the former notion, and countably infinite for the latter. The term denumerable can also be used to mean countably infinite,^{[2]} or countable, in contrast with the term nondenumerable. ^{[3]}
Contents
Definition
A set S is called countable if there exists an injective function f from S to the natural numbers ^{[4]}
If f is also surjective and therefore bijective, then S is called countably infinite.
As noted above, this terminology is not universal: Some authors use countable to mean what is here called "countably infinite," and to not include finite sets.
For alternative (equivalent) formulations of the definition in terms of a bijective function or a surjective function, see the section Formal definition and properties below.
Introduction
A set is a collection of elements, and may be described in many ways. One way is simply to list all of its elements; for example, the set consisting of the integers 3, 4, and 5 may be denoted {3,4,5}. This is only effective for small sets, however; for larger sets, this would be timeconsuming and errorprone. Instead of listing every single element, sometimes an ellipsis ("...") is used, if the writer believes that the reader can easily guess what is missing; for example, presumably denotes the set of integers from 1 to 100. Even in this case, however, it is still possible to list all the elements, because the set is finite; it has a specific number of elements.
Some sets are infinite; these sets have more than n elements for any integer n. For example, the set of natural numbers, denotable by , has infinitely many elements, and we cannot use any normal number to give its size. Nonetheless, it turns out that infinite sets do have a welldefined notion of size (or more properly, of cardinality, which is the technical term for the number of elements in a set), and not all infinite sets have the same cardinality.
To understand what this means, we must first examine what it does not mean. For example, there are infinitely many odd integers, infinitely many even integers, and (hence) infinitely many integers overall. However, it turns out that the number of odd integers, which is the same as the number of even integers, is also the same as the number of integers overall. This is because we arrange things such that for every integer, there is a distinct odd integer: ... −2 → −3, −1 → −1, 0 → 1, 1 → 3, 2 → 5, ...; or, more generally, n → 2n + 1. What we have done here is arranged the integers and the odd integers into a onetoone correspondence (or bijection), which is a function that maps between two sets such that each element of each set corresponds to a single element in the other set.
However, not all infinite sets have the same cardinality. For example, Georg Cantor (who introduced this branch of mathematics) demonstrated that the real numbers cannot be put into onetoone correspondence with the natural numbers (nonnegative integers), and therefore that the set of real numbers has a greater cardinality than the set of natural numbers.
A set is countable if: (1) it is finite, or (2) it has the same cardinality (size) as the set of natural numbers. Equivalently, a set is countable if it has the same cardinality as some subset of the set of natural numbers. Otherwise, it is uncountable.
Formal definition and properties
By definition a set S is countable if there exists an injective function
from S to the natural numbers
It might seem natural to divide the sets into different classes: put all the sets containing one element together; all the sets containing two elements together; ...; finally, put together all infinite sets and consider them as having the same size. This view is not tenable, however, under the natural definition of size.
To elaborate this we need the concept of a bijection. Although a "bijection" seems a more advanced concept than a number, the usual development of mathematics in terms of set theory defines functions before numbers, as they are based on much simpler sets. This is where the concept of a bijection comes in: define the correspondence
 a ↔ 1, b ↔ 2, c ↔ 3
Since every element of { a, b, c } is paired with precisely one element of { 1, 2, 3 }, and vice versa, this defines a bijection.
We now generalize this situation and define two sets to be of the same size if (and only if) there is a bijection between them. For all finite sets this gives us the usual definition of "the same size". What does it tell us about the size of infinite sets?
Consider the sets A = { 1, 2, 3, ... }, the set of positive integers and B = { 2, 4, 6, ... }, the set of even positive integers. We claim that, under our definition, these sets have the same size, and that therefore B is countably infinite. Recall that to prove this we need to exhibit a bijection between them. But this is easy, using n ↔ 2n, so that
 1 ↔ 2, 2 ↔ 4, 3 ↔ 6, 4 ↔ 8, ....
As in the earlier example, every element of A has been paired off with precisely one element of B, and vice versa. Hence they have the same size. This gives an example of a set which is of the same size as one of its proper subsets, a situation which is impossible for finite sets.
Likewise, the set of all ordered pairs of natural numbers is countably infinite, as can be seen by following a path like the one in the picture:
The resulting mapping is like this:
 0 ↔ (0,0), 1 ↔ (1,0), 2 ↔ (0,1), 3 ↔ (2,0), 4 ↔ (1,1), 5 ↔ (0,2), 6 ↔ (3,0) ....
It is evident that this mapping will cover all such ordered pairs.
Interestingly: if you treat each pair as being the numerator and denominator of a vulgar fraction, then for every positive fraction, we can come up with a distinct number corresponding to it. This representation includes also the natural numbers, since every natural number is also a fraction N/1. So we can conclude that there are exactly as many positive rational numbers as there are positive integers. This is true also for all rational numbers, as can be seen below (a more complex presentation is needed to deal with negative numbers).
Theorem: The Cartesian product of finitely many countable sets is countable.
This form of triangular mapping recursively generalizes to vectors of finitely many natural numbers by repeatedly mapping the first two elements to a natural number. For example, (0,2,3) maps to (5,3) which maps to 39.
Sometimes more than one mapping is useful. This is where you map the set which you want to show countably infinite, onto another set; and then map this other set to the natural numbers. For example, the positive rational numbers can easily be mapped to (a subset of) the pairs of natural numbers because p/q maps to (p, q).
What about infinite subsets of countably infinite sets? Do these have fewer elements than N?
Theorem: Every subset of a countable set is countable. In particular, every infinite subset of a countably infinite set is countably infinite.
For example, the set of prime numbers is countable, by mapping the nth prime number to n:
 2 maps to 1
 3 maps to 2
 5 maps to 3
 7 maps to 4
 11 maps to 5
 13 maps to 6
 17 maps to 7
 19 maps to 8
 23 maps to 9
 etc.
What about sets being "larger than" N? An obvious place to look would be Q, the set of all rational numbers, which intuitively may seem much bigger than N. But looks can be deceiving, for we assert:
Theorem: Q (the set of all rational numbers) is countable.
Q can be defined as the set of all fractions a/b where a and b are integers and b > 0. This can be mapped onto the subset of ordered triples of natural numbers (a, b, c) such that a ≥ 0, b > 0, a and b are coprime, and c ∈ {0, 1} such that c = 0 if a/b ≥ 0 and c = 1 otherwise.
 0 maps to (0,1,0)
 1 maps to (1,1,0)
 −1 maps to (1,1,1)
 1/2 maps to (1,2,0)
 −1/2 maps to (1,2,1)
 2 maps to (2,1,0)
 −2 maps to (2,1,1)
 1/3 maps to (1,3,0)
 −1/3 maps to (1,3,1)
 3 maps to (3,1,0)
 −3 maps to (3,1,1)
 1/4 maps to (1,4,0)
 −1/4 maps to (1,4,1)
 2/3 maps to (2,3,0)
 −2/3 maps to (2,3,1)
 3/2 maps to (3,2,0)
 −3/2 maps to (3,2,1)
 4 maps to (4,1,0)
 −4 maps to (4,1,1)
 ...
By a similar development, the set of algebraic numbers is countable, and so is the set of definable numbers.
Theorem: (Assuming the axiom of countable choice) The union of countably many countable sets is countable.
For example, given countable sets a, b, c ...
Using a variant of the triangular enumeration we saw above:
 a_{0} maps to 0
 a_{1} maps to 1
 b_{0} maps to 2
 a_{2} maps to 3
 b_{1} maps to 4
 c_{0} maps to 5
 a_{3} maps to 6
 b_{2} maps to 7
 c_{1} maps to 8
 d_{0} maps to 9
 a_{4} maps to 10
 ...
Note that this only works if the sets a, b, c,... are disjoint. If not, then the union is even smaller and is therefore also countable by a previous theorem.
Also note that the axiom of countable choice is needed in order to index all of the sets a, b, c,...
Theorem: The set of all finitelength sequences of natural numbers is countable.
This set is the union of the length1 sequences, the length2 sequences, the length3 sequences, each of which is a countable set (finite Cartesian product). So we are talking about a countable union of countable sets, which is countable by the previous theorem.
Theorem: The set of all finite subsets of the natural numbers is countable.
If you have a finite subset, you can order the elements into a finite sequence. There are only countably many finite sequences, so also there are only countably many finite subsets.
The following theorem gives equivalent formulations in terms of a bijective function or a surjective function. A proof of this result can be found in Lang's text.^{[2]}
Theorem: Let S be a set. The following statements are equivalent:
 S is countable, i.e. there exists an injective function
 .
 Either S is empty or there exists a surjective function
 .
 Either S is finite or there exists a bijection
 .
Several standard properties follow easily from this theorem. We present them here tersely. For a gentler presentation see the sections above. Observe that in the theorem can be replaced with any countably infinite set. In particular we have the following Corollary.
Corollary: Let S and T be sets.
 If the function
 is injective and T is countable then S is countable.
 If the function
 is surjective and S is countable then T is countable.
Proof: For (1) observe that if T is countable there is an injective function Then if is injective the composition is injective, so S is countable.
For (2) observe that if S is countable there is a surjective function Then if is surjective the composition is surjective, so T is countable.
Proposition: Any subset of a countable set is countable.
Proof: The restriction of an injective function to a subset of its domain is still injective.
Proposition: The Cartesian product of two countable sets A and B is countable.
Proof: Note that is countable as a consequence of the definition because the function given by f(m,n) = 2^{m}3^{n} is injective. It then follows from the Basic Theorem and the Corollary that the Cartesian product of any two countable sets is countable. This follows because if A and B are countable there are surjections and . So
is a surjection from the countable set to the set and the Corollary implies is countable. This result generalizes to the Cartesian product of any finite collection of countable sets and the proof follows by induction on the number of sets in the collection.
Proposition: The integers are countable and the rational numbers are countable.
Proof: The integers are countable because the function given by f(n) = 2^{n} if n is nonnegative and f(n) = 3 ^{ n } if n is negative is an injective function. The rational numbers are countable because the function given by g(m,n) = m / (n + 1) is a surjection from the countable set to the rationals .
Proposition: If A_{n} is a countable set for each then is countable.
Proof: This is a consequence of the fact that for each n there is a surjective function and hence the function
given by G(n,m) = g_{n}(m) is a surjection. Since is countable the Corollary implies is countable. We are using the axiom of countable choice in this proof in order to pick for each a surjection g_{n} from the nonempty collection of surjections from to A_{n}.
Cantor's Theorem asserts that if A is a set and is its power set, i.e. the set of all subsets of A, then there is no surjective function from A to . A proof is given in the article Cantor's Theorem. As an immediate consequence of this and the Basic Theorem above we have:
Proposition: The set is not countable; i.e. it is uncountable.
For an elaboration of this result see Cantor's diagonal argument.
The set of real numbers is uncountable (see Cantor's first uncountability proof), and so is the set of all infinite sequences of natural numbers. A topological proof for the uncountability of the real numbers is described at finite intersection property.
Minimal model of set theory is countable
If there is a set which is a standard model (see inner model) of ZFC set theory, then there is a minimal standard model (see Constructible universe). The LöwenheimSkolem theorem can be used to show that this minimal model is countable. The fact that the notion of "uncountability" makes sense even in this model, and in particular that this model M contains elements which are
 subsets of M, hence countable,
 but uncountable from the point of view of M,
was seen as paradoxical in the early days of set theory, see Skolem's paradox.
The minimal standard model includes all the algebraic numbers and all effectively computable transcendental numbers, as well as many other kinds of numbers.
Total orders
Countable sets can be totally ordered in various ways, e.g.:
 Well orders (see also ordinal number):
 The usual order of natural numbers
 The integers in the order 0, 1, 2, 3, .., −1, −2, −3, ..
 Other:
 The usual order of integers
 The usual order of rational numbers
See also
Notes
 ^ For an example of this usage see (Rudin 1976, Chapter 2)
 ^ ^{a} ^{b} See (Lang 1993, §2 of Chapter I).
 ^ See (Apostol 1969, Chapter 13.19).
 ^ Since there is an obvious bijection between and it makes no difference whether one considers 0 to be a natural number of not. In any case, this article follows ISO 3111 and the standard convention in mathematical logic, which make 0 a natural number.
References
 Lang, Serge (1993), Real and Functional Analysis, Berlin, New York: SpringerVerlag, ISBN 0387940014
 Rudin, Walter (1976), Principles of Mathematical Analysis, New York: McGrawHill, ISBN 007054235X
Categories: Basic concepts in infinite set theory
 Cardinal numbers
 Infinity
Wikimedia Foundation. 2010.
Look at other dictionaries:
countable set — noun A set that is finite or can be put in one to one relation with the integers … Wiktionary
Hereditarily countable set — In set theory, a set is called hereditarily countable if and only if it is a countable set of hereditarily countable sets. This inductive definition is in fact well founded and can be expressed in the language of first order set theory. A set is… … Wikipedia
Set (mathematics) — This article gives an introduction to what mathematicians call intuitive or naive set theory; for a more detailed account see Naive set theory. For a rigorous modern axiomatic treatment of sets, see Set theory. The intersection of two sets is… … Wikipedia
Set theory — This article is about the branch of mathematics. For musical set theory, see Set theory (music). A Venn diagram illustrating the intersection of two sets. Set theory is the branch of mathematics that studies sets, which are collections of objects … Wikipedia
countable — /ˈkaʊntəbəl/ (say kowntuhbuhl) adjective 1. able to be counted. 2. Mathematics of or relating to a set whose elements can be arranged in an infinite sequence so that each element occurs exactly once: the set of positive integers is a countable… … Australian English dictionary
countable — adjective Date: 1581 capable of being counted; especially capable of being put into one to one correspondence with the positive integers < a countable set > • countability noun • countably adverb … New Collegiate Dictionary
settop box — setˈ topˈ box noun A device that allows a conventional television set to receive a digital signal • • • Main Entry: ↑set * * * set top box UK US noun [countable] [singular set top box plural … Useful english dictionary
Set theory of the real line — is an area of mathematics concerned with the application of set theory to aspects of the real numbers. For example, one knows that all countable sets of reals are null, i.e. have Lebesgue measure 0; one might therefore ask the least possible size … Wikipedia
settop box — ˈset top ˌbox noun [countable] a piece of equipment that allows you to use the Internet on your television, and to receive digital television * * * set top box UK US noun [C] COMMUNICATIONS ► a piece of electronic equipment that makes it possible … Financial and business terms
setup — ˈset up also setup noun [countable] 1. the way something is organized or arranged: • The trust will be managed by a board of directors, although that setup requires regulatory approval. 2. COMPUTING all the parts that work together in a system,… … Financial and business terms