File area network
File Area Networking refers to various methods of sharing files over a network such as storage devices connected to a
file serveror network-attached storage(NAS).
Data storage technology over the years has evolved from a
direct attached storagemodel (DAS) to two other means of connecting applications to their storage – namely Network Attached Storage(NAS) and a Storage Area Network(SAN). Since all three techniques generally differ after the file system API level, it is possible to move between these different storage models with minimal or no impact to the applications themselves and without requiring a re-write of the application unless an application has been communicating directly with the storage hardware and not going through a standard operating system supported interface.
Having storage directly attached to the workstations and application servers makes management of this data intractable and an administration, compliance and maintenance nightmare. If more storage needs to be added, changes are to be made directly to the hardware where the applications are running on, causing downtime. It also introduces data responsibility to the application administrators, which is not an optimal responsibility model. Furthermore, pockets (islands) of these direct attached storage cannot be used in a globally optimal manner, where storage space can be consolidated over lesser storage media. Finally, DAS introduces too much management overhead when tasks such as backups and compliance are involved.
Backup and compliance software and hardware need reach all the way into the application and workstation infrastructure to be able to perform their tasks, which typically crosses IT boundaries in enterprises as well as introduces complexity due to the lack of consolidation for these tasks.
In a SAN, the separation of the application servers and workstations from their storage medium is done at the lowest level possible in the communication stack, namely at the block IO level. Here, the raw storage commands to store and retrieve atoms of the storage (such as disk blocks) are extended from local bus access to a
fibre channelor IP network based access (such as with iSCSI). Furthermore, SAN technologies offer a degree of virtualization such that the actual physical location and parameters of the disk are abstracted (virtualized) from the actual file system logic which runs on the application servers and workstations. However, the actual file system logic still does reside on the application servers and workstations and the file system is thus managed by them.
SAN allows storage administrators to consolidate storage and manage the data centrally, administering such tasks such as compliance, security, backup and capacity extension in one centralized location. However, the consolidation typically can extend as granular as a volume. Each volume is then managed by the storage client directly. While volumes can be virtualized, different volumes remain independent and somewhat restrict the flexibility for adds, moves and changes by the storage administrator without involving application server and workstation IT architects. The most common reasonFact|date=April 2008 for using a SAN is where the application required direct control over the file system for reasons such as manageability and performance.
Typically NAS has been associated with storing unstructured content as files. Storage clients (such as workstations and application servers) typically use IP based network protocols such as
CIFSand NFS to store, retrieve and modify files on a NAS. The granularity here is the file as opposed to volumes in SANs. Many applications today use NAS, and NAS is by far the fastest growing storage model.Fact|date=September 2007 The application servers and workstations do not control the actual file system, but rather works in a brokered model where they request file operations (such as create, read, write, delete, modify and seek) to the file servers.
NAS devices, commonly known as "
filers", are typically storage arrays with direct attached storage that communicate with application servers using file-level protocols, such as CIFS or NFS. NAS heads are diskless NAS devices that translate between CIFS and NFS on the front end (to the application servers) and block level storage (such as iSCSI) to the actual storage hardware. CIFS and NFS are chainable protocols, which means that NAS heads can be chained and one NAS device can communicate CIFS or NFS to the application tier and use CIFS and NFS again to the actual storage network (another NAS device). As described below, such feature is a key for introducing file area networks.
Tiered Storage Model
As with solving any complex problem, breaking the storage architecture down into sub problems and viewing the storage area in tiers proves invaluable when it comes to implementation abstraction, optimization, management, changes and scaling. In mature implementations, the storage architecture is split into different categories or tiers. Each tier differs in type of hardware used, the performance of the hardware, the scale factor of that tier (amount of storage available), the availability of the tier and policies at that tier.
A very common model is to have a primary tier with expensive, high performance and limited storage. Secondary tiers typically comprise of less expensive storage media and disks and can either host data migrated (or staged) by ILM software from the primary tier or can host data directly saved on the secondary tier by the application servers and workstations if those storage clients did not warrant primary tier access. Both tiers are typically serviced by a backup tierOr|date=April 2008 where data is copied into long term and off site storage.
HSM and ILM
Concurrently with the tiered storage model, storage architects began adopting a technique known as
hierarchical storage management(or HSM) where the process would move data based on policies (such as age or importance) from one tier to the next and eventually to archive or delete the data. Since then HSM has been expanded and relabeled as Information Lifecycle Management(ILM). ILM typically is seen to have addedFact|date=April 2008 capabilities such as logic for data classification, inspection and compliance and policy administration. Both HSM and ILM are more than a product, they are a combination of a set of procedures adopted along with software tools to carry out these policies. Many products have incorporated ILM hooks directly into the hardwareFact|date=April 2008 with support for migration of data from one tier to the next such that such moves are as transparent as possible to the application tier.
The Storage Admission Tier (SAT)
The tiered storage architecture provides the basic framework for the application of intelligence to storage management. It provides a solid infrastructure on which data management policies can be enforced. However, the manner in which they are enforced will ultimately influence the efficiency of the storage architecture.Or|date=April 2008 In most storage deployments today, a tiered architecture is flat when it comes to the layer of intelligence.Or|date=April 2008 Each tier has limited capability to operate intelligently on the data, and the farther a tier from the actual application layer, the less information is available at that tier to operate intelligently on the files and control management of that data. A good example is HSM or ILM software which typically resides orthogonally to tiered model as shown in the diagram below.
The ILM software for example, resides on externally induced intelligenceOr|date=April 2008 to migrate files from one tier to the next, leaving meta data (such as shortcuts, or vendor specific stub files) on the primary as they move files to secondary tiers so as to control the storage consumed on the primary and therefore providing cost savings. While such techniques genuinely contribute toward cost savings, they have implementation overheads and have their own quirks (such as management of the stub files themselves). Furthermore, as application infrastructure changes, for example with the addition of new application services, changes are required on the ILM strategies as to the location of the data (allocated shares or volumes for that application) and policies for its migration and file management. Also, when storage operations such as backup restores are performed (for example, during disaster recovery), the HSM or ILM software will need to get involved.
Given the coupling (chaining) nature of the storage networking protocols such as CIFS, NFS or iSCSI, one can see that the introduction of a tier dedicated to storage management is an architecturally correct approach to managing information stored into the storage network.Or|date=April 2008 Such a tier, known as the storage admission tierFact|date=April 2008 precedes the tier one storage services, such as those offered by a NAS filer.
Virtualize, Optimize and Manage at the SAT
The SAT introduces three core capabilities into the storage architecture:
* Virtualize – Storage virtualization can happen at different layers. At the SAN layer, the amalgamation of multiple storage devices as one single storage unit greatly simplifies management of storage hardware resource allocation. At the NAS layer, the same degree of virtualization is needed to make multiple heterogeneous file server shares appear as at a more logical level, abstracting the filer implementations from the application tier. Another aspect that primary tier virtualization aids with is the consolidation of storage silos which is a top priority for any storage organization. The primary tier will always be subject to changes due to new technologies at that tier as well as storage expansion and hardware migration. In a traditional NAS architecture, the application servers and workstations are tightly coupled with the NAS hardware making moves and changes difficult,Fact|date=April 2008 tying the application server architects and the storage architects at the hips. The SAT introduces virtualization into the storage architecture that shields the application tier from the actual implementation of the primary NAS tier. A share such as \filer01share01 may be mapped to a more meaningful name such as \marketingpresentations. Introduction of another filer with expanded capacity such as \filer02share02 maybe seamlessly augmented to \marketingpresentations via SAT technologies.
* Optimize - unstructured file content comprises most of the storage growth in most enterprises today. Data growth ranges anywhere from 40% to 125% annually in most companies. Consolidation of storage,Fact|date=April 2008 compliance, application upgrades, and the increase in the criticality of file data as it relates to mission critical business processes are cited as the top reason for this data growth. As enterprises move toward sophisticated applications, their reliance on information has grown exponentiallyFact|date=April 2008 and the SAT is seenOr|date=April 2008 as the tier at which data is to be optimized to help combat enterprises with spiraling storage costs. While disk prices continue to drop, simply throwing more disks at the growing storage problem is not a scalable approach and will not work in most organizations,Or|date=April 2008 especially as data at the primary tier in many large enterprises has already entered the hundreds of terabytes to petabyte ranges. Storage optimization techniques include a vast set of technologies, including:
# Primary real time storage compressionOr|date=April 2008
# Data de-duplication (commonality factoring),
single-instance storage(SIS) and content addressed storage(CAS)
# File classification and placement techniques (HSM can be applied at this tier and the target location of the file can be decided as the file enters the network based on fingerprinting techniques, criticality of the file, or meta data such as file usage and age).
# HSM and ILM. HSM and ILM go hand in glove with file classification. This is an on going process and the storage admission tier is ultimately responsible for the life cycle of the data it places in the storage. SAT products continually go back and optimize data based on metadata information such as access time stamps and frequency, age of the data, departmental information and so on.
:As mentioned above, it is important to note that the SAT is not just a process that is applied only when the data enters the storage tier. SAT products continually optimize and restructure the data layout for maximum efficiency in accordance with IT and departmental policies. As the SAT sits between the application tier and the storage framework, they utilize both application level intelligence such as business workflows, compliance rules, B2B access rules as well as storage cost structure in order to constantly enforce both cost savings and corporate compliance.Or|date=April 2008
* Manage – Managing data in silos is obviously less optimal than having a global management strategy for all of the enterprise content. As compliance and regulatory needs increase, IT must be able to control policies, security and access control (including rights management) from the entry and exit point of the data to and from the storage network.Or|date=April 2008 As all data access traverses through the SAT, the data can be managed at this tier, and audit tasks, document inspection, file classification and encryption can be globally performed here.
The inclusion of the SAT is primarily for the management and optimization of the data before the data even enters the primary storage tier.Or|date=April 2008 Sitting between the application server (or workstation) infrastructure and the primary storage, this tier has maximum visibility into application level intelligence and has most control over the management, policies, optimization and placement of the data. Having operated on the data as it enters the storage network, the storage network functionality (such as backups and restores) can be implemented independently of the optimization of the data. The VOM properties of the SAT tier aids with the implementation of well known storage techniques such as:
# Distributed and clustered file systems
Network file managementand virtualization (Global Unified Namespaces)
# Storage optimization and compression
# Storage security, access control and encryption
# Digital rights management
# File data migration, replication and placement controls (without the introduction of stub files)
# File classification and compliance
While many of the above techniques have been in play for quite sometime in varying parts of the storage architecture, they have largely been in silos and implemented without a proper model,Or|date=April 2008 and more importantly as overlay techniques that physically manage the data and its placement separately from the application tier that introduced the information into the storage in the first place. Not having a formal tiered approach to managing data introduces different technology components and products that compete for the management of the data and prevent the various storage techniques listed above to co-exist optimally. In such an overlay architecture approach, it is difficult to implement all storage tasks on all data globally, and instead IT departments implement subsets of these techniques.Or|date=April 2008
The SAT introduces a formal model in which the above storage functions can be implemented. It ensures that these features of the storage network apply globally to the entire storage hierarchy in a uniform, centrally controlled and well planned manner.Or|date=April 2008
File Area Networking (FAN)
The combination of the Storage Admission Tier (SAT), the Tiered Storage Model and NAS/SAN are known as the File Area Network (FAN).Fact|date=April 2008 Originally coined by data storage analyst Brad O'Neill of Taneja Group,Fact|date=April 2008 a FAN is described as a systematic approach to organizing various file-related technologies in today’s enterprises. Implementing a FAN provides IT with a scalable and flexible approach to administering intelligence to the management of file data. According to Brad O’Neill, Senior Analyst at Taneja Group, the capabilities of a FAN include:Or|date=April 2008
* Enterprise-wide, pervasive controls of all file information, and management of file attributes based on metadata and content values, regardless of platform;
* Ability to establish user file visibility and access rights based on business values (e.g., departments, projects, geographies) regardless of physical device;
* Non-disruptive, transparent movement of file information across geographical boundaries;
* Creation of file management services that are deployed as true "services" to the entire infrastructure (e.g., not deployed in application-specific silos); and
* Measurable return on investment (ROI) for file management due to optimization of the file content through technologies such as compression and de-duplication of redundant content.
Elements of a FAN
Based on Taneja Group’s research,Or|date=April 2008 below are some of the elements found in a mature FAN:
# Storage Devices - The foundation on which a FAN is built is the storage infrastructure. This can be either a SAN or a NAS environment. The only pre-requisite is that a FAN leverages a networked storage environment to enable data and resource sharing.
# File-serving devices/interfaces - Either as a directly integrated part of the storage infrastructure (e.g., NAS) or as a gateway interface (e.g., SAN), all FAN must have devices capable of serving file-level information in the form of standard protocols such as CIFS and/or NFS.
# Namespaces - A FAN is based on a file system with the ability to organize, present, and store file content for authorized end clients. This capability is referred to as the file system's "namespace," a central concept in the FAN architecture. As discussed above, inherent to the SAT is the ability to abstract and virtualize the actual file system architecture from the application servers. Linking an application server or a workstation directly with a share exposed by a filer introduces management overhead when for example, maintenance tasks are performed on the filers, such as hardware upgrades. Such a tight coupling between the application tier and the data tier introduces knowledge of the underlying NAS to the application servers which should be avoided. A SAT has the ability to abstract this interface and much like a Distributed File System with referrals (DFS), SAT techniques will map network file share access requests to the actual NAS hardware, providing storage IT administrators with central control over the ultimate placement of the file data anywhere in the storage infrastructure. Such a name space is known as a Globally Unified Namespace (GUN) and provides a heterogeneous, enterprise-wide abstraction of all file level information.
# File optimization services – File data optimization techniques range anywhere from duplicate data elimination via content addressed storage and commonality factoring to complex inline compression techniques that achieve maximum storage efficiency. Controlling storage size before the file data enters the primary tier has a multiplier effect on combating costs. Enterprises will have to buy less hardware and services, and manage a lot less data. Backup and restore windows are drastically reduces and storage infrastructure upgrades become less frequent. From a storage management standpoint, simply having less data to deal with would drastically reduce expenses incurred by data expansion, and the SAT is where such storage reduction techniques can be accurately and globally made across all file content.
# File security and DRM services – Technologies to encrypt the data and administer rights management and access control must be performed centrally as data enters and leaves the primary tier. This again is a key feature of the SAT as it sits between the application and workstation access points and the primary storage tier. It also provides a central location to administer and monitor security policies, a topic which is becoming increasing important in the light of compliance and regulatory requirements in dealing with sensitive information.
# File management services – Quota administration, storage expansion and migration and replication services are a critical component of any storage infrastructure. Rather than having to deal with these services in silos on different storage islands, a SAT allows storage administrators to control these tasks at the correct tier.
# End Clients - All FANs have end client machines that access the namespaces created by file systems. The clients could be on any type of platform or computing device.
# Connectivity - There are many possible ways for a FAN to connect its end clients to the namespaces. They are commonly connected across a standard LAN using CIFS or NFS, but they may simultaneously or alternatively leverage wide-area technologies, as well.
ATA over Ethernet- a light-weight open source SAN protocol
Fibre Channel- the most common SAN protocol
InfiniBand- a high-speed interconnect that can be used as a SAN
iSCSI- a newer SAN protocol
Storage area networks
Network-attached storage- the most common enterprise storage alternative
Redundant array of inexpensive disks(RAID) - a common method of disk storage
List of SAN Network Management Systems
Centralized storage area networks
Distributed storage area networks
JBODJust a bunch of disks
SMI-S- Storage Management Initiative Specification
File hosting service
Network File Control
Wikimedia Foundation. 2010.
Look at other dictionaries:
File Area Network — Un File Area Network (FAN) est une technique de stockage issue des techniques SAN (Storage Area Network) et NAS (Network attached storage/Serveur de fichiers), qui a pour concept de simplifier la gestion des fichiers. Sommaire 1 Principales… … Wikipédia en Français
File Area Networking — File Area Network Sommaire 1 Présentation 1.1 Principales différences entre FAN et SAN 1.2 Avantages du FAN 2 Voir aussi … Wikipédia en Français
Storage area network — Not to be confused with Network attached storage. Computer network types by geographical scope Body (BAN) Personal (PAN) Near me (NAN) Local (LAN) Home (HAN) Storage (SAN) Campus (CAN) Backbone Metropolitan (MAN) Wide (WAN) … Wikipedia
Wide area network — (WAN) is a computer network that covers a broad area (i.e., any network whose communications links cross metropolitan, regional, or national boundaries cite book last =Groth first = David authorlink = coauthors = Toby Skandier title = Network+… … Wikipedia
Storage Area Network — Réseau de stockage SAN Pour les articles homonymes, voir SAN. En informatique, un réseau de stockage SAN, ou plus simplement SAN (de l anglais Storage Area Network), est un réseau spécialisé permettant de mutualiser des ressources de stockage.… … Wikipédia en Français
local-area network — Abbreviated LAN. A group of computers and associated peripheral devices connected by a communicationschannel,capableofsharingfilesand other resources among several users. See also file server; metropolitan area network; peer to peer… … Dictionary of networking
local area network — LAN A network of microcomputers, printers, and other devices connected together in a localized area, such as an office building. Individual microcomputers (workstations) are able to use data on their own local hard disk. In addition, they can… … Big dictionary of business and management
SAN (storage area network) — Réseau de stockage SAN Pour les articles homonymes, voir SAN. En informatique, un réseau de stockage SAN, ou plus simplement SAN (de l anglais Storage Area Network), est un réseau spécialisé permettant de mutualiser des ressources de stockage.… … Wikipédia en Français
Network File Control — (NFC) is a common point of command and control for file data delivering a common set of network resident services, centrally defined and managed via policy, then applied across a heterogeneous file storage infrastructure. NFC s associated… … Wikipedia
Network-attached storage — Not to be confused with Storage area network. Network attached storage Connects to Local area network via: Ethernet Hard drives via one of: SATA SAS USB Fibre Channel Common manufacturers HP NetApp Dell Cisco … Wikipedia