Scale (ratio)


Scale (ratio)

The concept of scale is applicable if a system is represented proportionally by another system. For example, for a scale model of an object, the ratio of corresponding lengths is a dimensionless scale, e.g. 1:25; this scale is larger than 1:50.

In the general case of a differentiable bijection, the concept of scale can, to some extent, still be used, but it may depend on location and direction. It can be described by the Jacobian matrix. The modulus of the matrix times a unit vector is the scale in that direction. The non-linear case applies for example if a curved surface like part of the Earth's surface is mapped to a plane, see map projection.

In the case of an affine transformation the scale does not depend on location but it depends in general on direction. If the affine transformation can be decomposed into isometries and a transformation given by a diagonal matrix, we have directionally differential scaling and the diagonal elements (the eigenvalues) are the scale factors in two or three perpendicular directions. For example, on some profile maps horizontal and vertical scale are different; in particular elevation may be shown in a larger scale than horizontal distance.

In the case of directional scaling (in one direction only) there is just one scale factor for one direction.

The case of uniform scaling corresponds to a geometric similarity. There is just one scale throughout.

In the case of an isometry the scale is 1:1.

In the more general case of one quantity represented by another one, the scale has also a physical dimension. E.g., if an arrow is drawn to represent a physical vector, the "scale" has a physical dimension equal to that of the vector, divided by length. For example, if a force of 1 newton is represented by an arrow of 2 cm, the scale is 1 m : 50 N. There is typically consistency in scale among quantities of the same dimension, but otherwise scales within the same horse may vary; e.g. "5 m" may also be represented by an arrow of 2 cm; in that case the scale for vectors which represent length is 1:250. Correspondingly, torques could be represented on the same map by areas in a scale of 1 m² : 12 500 Nm, which is equal to 1 m : 12 500 N. Torques in the plane of the map could be represented by arrows with an independent scale of e.g. 1 m : 300 Nm.

The scale of a map or enlarged or reduced model indicates the ratio between the distances on the map or model and the corresponding distances in reality or the original. E.g. a map of scale 1:50,000 shows a distance of 50,000 cm (=500 m) as 1 cm on a map, and a model on a scale 1:25 of a building with a height of 30 m has a model height of 1.20 m. An alternative method of indicating the scale is by a scale bar. This can also be applied on a computer screen etc., where the ratio may vary, and also remains valid when enlarging or reducing a paper map.

ee also

* Scale (map)
* Scale (disambiguation)
* Scales of scale models
* Scale factor
*


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Scale model — A scale model of the Tower of London. This model can be found inside the tower …   Wikipedia

  • Scale — NOTOC Scale can refer to:ystems of representation* Duraton scale, an ordering of time intervals from shortest to longest * Measurement, referring to the size of buildings or other structures * Scalability, a system s capacity to adapt to changes… …   Wikipedia

  • Scale factor — A scale factor is a number which scales, or multiplies, some quantity. In the equation y=Cx,C is the scale factor for x. C is also the coefficient of x, and may be called the constant of proportionality of y to x. For example, doubling distances… …   Wikipedia

  • scale — scale1 [skāl] n. [ME < LL scala (in Vulg., Jacob s ladder) < L, usually as pl., scalae, flight of stairs, ladder < * scandsla < scandere, to climb: see DESCEND] 1. Obs. a) a ladder or flight of stairs b) any means of ascent 2 …   English World dictionary

  • scale — Ⅰ. scale [1] ► NOUN 1) each of the small overlapping plates protecting the skin of fish and reptiles. 2) a thick dry flake of skin. 3) a white deposit formed in a kettle, boiler, etc. by the evaporation of water containing lime. 4) tartar formed… …   English terms dictionary

  • Scale relativity — is a theory of physics initially developed by Laurent Nottale, working at the French observatory of Meudon, near Paris, which extends special and general relativity with a new formulation of scale invariance preserving a reference length,… …   Wikipedia

  • Scale — Scale, v. t. [imp. & p. p. {Scaled}; p. pr. & vb. n. {Scaling}.] To weigh or measure according to a scale; to measure; also, to grade or vary according to a scale or system. [1913 Webster] Scaling his present bearing with his past. Shak. [1913… …   The Collaborative International Dictionary of English

  • scale — [n1] graduated system calibration, computation, degrees, extent, gamut, gradation, hierarchy, ladder, order, pecking order*, progression, proportion, range, ranking, rate, ratio, reach, register, rule, scope, sequence, series, spectrum, spread,… …   New thesaurus

  • ratio — I noun amount, balance, correlation, degree, differential, fixed relation, measure, percentage, perspective, proportion, proportional relation, proportionality, quota, range, relative estimate, relative quantity, scale, share, standard II index… …   Law dictionary

  • ratio — [n] percentage, relation of part to whole arrangement, correlation, correspondence, equation, fraction, proportion, proportionality, quota, quotient, rate, relationship, scale; concept 768 Ant. whole …   New thesaurus


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.