- Traction engine
A traction engine is a self-propelled
steam engineused to move heavy loads on roads, plough ground or to provide power at a chosen location. The name derives from the Latin "tractus", meaning 'drawn', since the prime function of any traction engine is to draw a load behind it. They are sometimes called road locomotives to distinguish them from (railway) steam locomotives – that is, steam engines that run on rails.
Traction engines tend to be large, robust and powerful, but heavy, slow, and poorly maneuverable. Nevertheless, they revolutionized agriculture and road haulage at a time when the only alternative prime mover was the
They became popular in industrialised countries from around 1850, when the first self-propelled portable steam engines for agricultural use were developed. Production continued well into the early part of the 20th century, when competition from
internal combustion engine-powered tractors saw them fall out of favour, although some continued in commercial use in the UK into the 1950s and later. All types of traction engines have now been superseded, in commercial use. However, several thousand examples have been preserved worldwide, many in working order. Steam fairs are held throughout the year in the UK, and in other countries, where visitors can experience working traction engines at close hand.
Traction engines were cumbersome and ill-suited to crossing soft or heavy ground so their agricultural use was usually either "in the belt" – powering farm machinery by means of a continuous leather belt driven by the flywheel – or in pairs, dragging an implement on a cable from one side of a field to another. However, where soil conditions permitted, direct hauling of implements ("off the drawbar") was preferred – in the U.S., this lead to the divergent development of the
Limits of technical knowledge and manufacturing technology meant that practicable road vehicles, powered by steam, did not start to appear until the early years of the 19th century.
The traction engine, in the form recognisable today, developed partly from an experiment in
1859when Thomas Aveling modified a Clayton & Shuttleworth portable engine, which had to be hauled from job to job by horses, into a self-propelled one. The alteration was made by fitting a long driving chain between the crankshaft and the rear axle. [cite book
title =Discovering Traction Engines
publisher =Shire Publications Ltd
isbn =0 85263 318 1 ] Other influences were existing vehicles which were the first to be referred to as traction engines such as the Boydell engines manufactured by various companies and those developed for road haulage by Bray. The first half of the 1860s was a period of great experimentation but by the end of the decade the standard form of the traction engine had evolved and would change little over the next sixty years.
Development of traction engines, and indeed all forms of steam road transport, was hampered in the UK by a series of government acts that tried to balance various competing interests, those of other types of vehicles as well as those maintaining the roads. Until the quality of roads improved there was little demand for faster vehicles and engines were geared accordingly to cope with their use on both roads and farm tracks.
Right through to the first decades of the twentieth century, manufacturers continued to seek a solution to realise the economic benefits of direct-pull ploughing, and, particularly in
North America, this led to the American development of the steam tractor. British companies such as Mann's and Garrett developed potentially-viable direct ploughing engines, however market conditions were against them, and they failed to gain widespead popularity. These market conditions arose in the wake of the First World War when there was a glut of surplus equipment available as a result of British Government policy. Large numbers of Fowler ploughing engines had been constructed in order to increase the land under tillage during the war, and many new light Fordson F tractors had been imported from 1917 onwards.
The last new UK-built traction engines were constructed in the 1930s, although many continued in commercial use for many years, while there remained experienced enginemen available to drive them.
From the 1950s, the 'preservation movement' started to build up as enthusiasts realised that these lumbering beasts were in danger of dying out. Many of the remaining engines were snapped-up by enthusiasts, and restored to working order. Traction engine rallies began, initially as races between engine owners and their charges, later developing into the significant tourist attractions that takes place in many locations each year. It has been estimated that over two thousand traction engines have been preserved.
steam enginefor a description of how the actual engine worked"
Although the first traction engines employed a chain drive, it is more typical for large gears to be used to transfer the drive from the crankshaft to the rear axle.
The machines typically have two large powered wheels at the back and two smaller wheels for steering at the front. However, some traction engines used a four-wheel-drive variation, and some experimented with an early form of
caterpillar track.cite web | title = The Hornsby Steam Crawler | work = (or 'Chain Tractor') | url = http://hornsbycrawler.org/index.php/Main/HomePage | accessdate = 2008-09-16]
A simple animation showing the steam cycle of a traction engine, the operation of the valve gear and the reversing mechanism, may be found here: [ [http://www.aonx97.dsl.pipex.com/TE-page/cycles-valves/steam-cycle.htm Animation (Flash) showing the steam cycle and reversing mechanism of a traction engine]
– "NB contains embedded music, which can be turned off!" (Accessed 23 Apr 2007)] .
Types and usage
Traction engines saw commercial use in a variety of roles between the mid-nineteenth and mid-twentieth centuries. Each role required a machine with a different set of characteristics, and the traction engine evolved into a number of different types to suit these different roles.
Agricultural (general purpose) engine
The most common form in the countryside. They were used for hauling and as a stationary power source. Even when farmers did not own such a machine they would rely upon it from time to time. Many farms would use
draught horses throughout the year, but during the harvest, threshing contractors would travel from farm to farm hauling the threshing machinewhich would be set up in the field and powered from the engine – a good example of the moveable stationary engine.
U.S. (agricultural) traction engine
Favourable soil conditions meant that U.S. traction engines usually pulled their ploughs behind them, thereby eliminating the complexities of providing a cable drum and extra gearing, hence simplifying maintenance. American traction engines were manufactured in a variety of sizes, with the 6 horsepower Russell being the smallest commercially made, and the large engines made by Russell, Case, and Reeves being the largest.
A distinct form of traction engine, characterised by the provision of a large diameter winding drum driven by separate gearing from the steam engine. Onto the drum a long length of wire rope was wound, which was used to haul an implement, such as a plough, across a field.
The winding drum was either mounted horizontally (below the boiler), vertically (to one side), or even concentrically, so that it encircled the boiler. The majority were under-slung (horizontal), however, and necessitated the use of an extra-long boiler to allow enough space for the drum to fit between the front and back wheels. These designs were the largest and longest traction engines to be built.
Mostly the ploughing engines worked in pairs, one on each side of the field, with the rope from each machine fastened to the implement to be hauled. The two drivers communicated by signals using the engine whistles.
A variety of implements were constructed for use with ploughing engines. The most common were the balance plough and the
cultivator- ploughing and cultivating being the most physically demanding jobs to do on an arable farm. Other implements could include a mole drainer, used to create an underground drainage channel or pipe, or a dredger bucket for dredging rivers or moats.
The engines were frequently provided with a 'spud tray' on the front axle, to store the 'spuds' which would be fitted to the wheels when travelling across claggy ground.
The man credited with the invention of the ploughing engine, in the mid-nineteenth century, was John Fowler, an English agricultural engineer and inventor.
Ploughing engines were rare in the U.S.; ploughs were usually hauled directly by an agricultural engine or
team tractor (U.S.)
North America, the term "steam tractor" usually refers to a type of agricultural tractorpowered by a steam engine, used extensively in the late 1800s and early 1900s.
team tractor (UK)
Great Britain, the term "steam tractor" is more usually applied to the smallest models of traction engine – typically those weighing seven tons or less – used for hauling small loads on public roads. Although known as "light steam tractors", these engines are generally just smaller versions of the road locomotive.
They were popular in the timber trade in the UK, although variations were also designed for general light road haulage and showman's use.
The most popular of these designs was probably the Garrett 4CD, meaning "4" nominal horse power Compound. [Garrett Steam Tractors & Rollers, R A Whitehead, 1999]
Designed for haulage of heavy loads on public highways, it was not uncommon for two or even three to be coupled together to allow heavier loads to be handled.
The characteristic features of these engines are very large rear driving wheels fitted with solid rubber tyres; three-speed gearing (most traction engine types have only two gears); rear suspension; and belly tanks to provide a greater range between the stops needed to replenish water. All these features are to improve the ride and performance of the engine, which used to be used for journeys of hundreds of miles. Most road locomotives are fitted with a winch drum on the back axle. This can be used by removing the driving pins that secure the rear wheels, allowing the drive train to power the winch drum instead of the wheels.
A number of road locomotives are fitted with a crane boom on the front. The boom pivot is mounted on the front axle assembly, and a small
winchis mounted on an extension to the smokebox in front of the chimney; the cable passing over a sheaveat the top of the boom arm. The winch is powered by bevel gears on a shaft driven directly from the engine, with some form of clutch providing raise/lower control. These road locomotives can be used to load a trailer as well as to haul it to a new location. They are often referred to as 'crane engines'.
A particularly distinctive form of road locomotive was the Showman's engine. These were operated by travelling showmen both to tow fairground equipment and to power it when set up; either directly or by running a generator. These could be highly decorated and formed part of the spectacle of the fair. Some were fitted with a small crane that could be used when assembling the ride.
Steamroller"Another distinct form of the steam traction engine, used for road building and flattening ground. Typically designed with a single heavy roller replacing the front wheels and axle, and smooth rear wheels without strakes.
Some traction engines were designed to be convertible: the same basic machine could be fitted with either standard ('treaded' or tyred) road wheels, or else smooth rolls – the changeover between the two being achieved in less than half a day.
Relatives of the traction engine
A number of other steam-powered vehicles share design features with the traction engine, usually because the same technology was re-used in a new application.
A portable engine is a type of self-contained steam engine and boiler combination that may be moved from site to site. Although bearing a strong family resemblance, in both appearance and (stationary) operation, the portable engine is "not" classed as a traction engine as it is not self-propelled. However, it is included in this list because the traction engine is a direct descendant.
team wagon Anchors|Steam wagon|Steam waggon|Steam lorry
). And they resembled lorries in having a load-carrying body and being built around a chassis (so they cannot really be called traction engines).
The more modern "
under-type" designs have the engine "under" the chassis (although the boiler - usually a vertical type boiler - remains in the cab), and generally resemble lorries rather than traction engines.
The earliest examples of either type had steel or wooden wheels, later followed by solid rubber tyres. Various developments fully enclosed cabs and pneumatic tyres were later tried by companies such as the
Sentinel Waggon Worksin a bid to compete with internal combustion engine-powered lorries. Some wagons built to run on solid tyres were later converted to pneumatic tyres.
team lorry manufacturers
Many traction engine builders also built forms of steam lorry, but some firms specialised in them.
John I. Thornycroft & Companywas an established marine engineering company that successfully spawned the Steam Carriage and Wagon Companyfor the production of steam-powered road vehicles. They supplied steam lorries to the British Army, commercial steam wagons and vans, steam cars (for a few years), and buses – London's first powered bus was a Thornycroft double-decker steam bus.
Manufacturers who specialised in the construction of steam lorries include:
Mann’s Patent Steam Cart and Wagon Company
Sentinel Waggon Works
Sheppee– UK company, also built steam cars (briefly)
Steam Carriage and Wagon Company(later, Thornycroft), Basingstoke
Yorkshire Patent Steam Wagon Co.
Steam lorries were the best road lorries of their day. The Sentinel S4 was easily capable of attaining 60 mph at a time when petrol lorries would be lucky to achieve 35 mph, the Sentinel DG's could reach 40 mph (considerably more than their listed speed) and the Foden lorries were limited only by speed limits placed on them – the makers even offered alternative gearing capable of twice the speed limit although they were still not as fast as the Sentinels.
team lorries on film
The 1975 Disney film "
One of Our Dinosaurs is Missing" featured a steam lorry in a (literally) supporting role. It was used as the 'getaway vehicle' for the theft of a large dinosaur skeleton from the Natural History Museum. It was involved in a lengthy chase sequence through the streets of London – as a result, the steam lorry, and the dinosaur, featured prominently on the film's posters and video/DVD case artwork.
The lorry was based on an 'unusual' prototype, a long wheelbase undertype, with a small vertical boiler mounted to one side of the cab, and no windscreen.
Why road steam disappeared in the UK
Road steam disappeared through becoming uneconomical to operate, and unpopular with British governments. By 1921, steam tractors had demonstrated clear economic advantages over horse power for heavy hauling and short journeys. However, petrol lorries were starting to show better efficiency and could be purchased cheaply as war surplus; on a busy route a 3-ton petrol lorry could save about £100 per month compared to its steam equivalent, in spite of restrictive speed limits, and relatively high fuel prices and maintenance costs. [cite news | work = The Times | date =
12 February 1921| title = Motor Transport. County Council Haulage II Petrol V. Horse]
Throughout the 1920s and 1930s successive governments placed tighter restrictions on road steam haulage, including speed, smoke and vapour limits [cite news| work = The Times | date =
06 April 1922| title = Motor Transport. The New Legislation ] , and a 'wetted tax', where the tax due was proportional to the size of the wetted area of the boiler; this made steam engines less competitive against domestically-produced internal combustion engined units (although imports were subject to taxes of up to 33%).
As a result of the
Salter Reporton road funding, an 'axle weight tax' was introduced in 1933 in order to charge commercial motor vehicles more for the costs of maintaining the road system, and to do away with the perception that the free use of roads was subsidising the competitors of rail freight. The tax was payable by all road hauliers in proportion to the axle load; it was particularly damaging to steam propulsion, which was heavier than its petrol equivalent. [cite news | work = The Times | title = Motor Taxation. Vehicles Using Fuel Oil (Letters) | date = 24 March 1933]
Initially, imported oil was taxed much more than British-produced coal, but in 1934
Oliver Stanley, the Minister for Transport, reduced taxes on fuel oils while raising the Road Fund charge on road locomotives to £100 pounds a year, provoking protests by engine manufacturers, hauliers, showmen and the coal industry. This was at a time of high unemployment in the mining industry, when the steam haulage business represented a market of 950,000 tons of coal annually. The tax was devastating to the businesses of heavy hauliers and showmen, and precipitated the scrapping of many engines. [cite news | work = The Times | date = 09 March 1934| title = Tax On Heavy Oils ]
Traction Engines as Railway Locomotives
Several traction engine builders (such as
Aveling and Porterand Fowler) built light railway locomotives based on their traction engines. In their crudest form these simply had flanged steel wheels to enable them to run on rails. More sophisticated models had the boiler and engine mounted on a chassiswhich carried railway-wagon style axles. The rear axle was driven from the engine by gear or chain-drive. These unusual locomotives were sold to small industries for use in shunting and marshalling duties, although they also found favour with engineering firms engaged in the construction of mainline railways for hauling men, equipment and materials over the partly-constructed line.
* "spud" or "lug" – strip of angled metal that could be bolted to the driving wheels to provide greater traction on soft or heavy ground. Spuds were often required on ploughing engines when moving across farmland.
* "strake" – name for the diagonal strips cast into or rivetted onto the wheel rims to provide traction on unmade ground (similar to the tread on a pneumatic tyre).
* "Nominal horse power"– NHP is the typical way that traction engines are rated. However, it has long been accepted that nominal horse power understates the actual power of the engine. There are many ways to estimate the actual horse power but none of them gives an accurate answer, for example, a 4NHP engine is said to be approximately 36HP; however a 4NHP engine can happily pull a laden 8-wheeler lorry while a diesel engine of 36HP cannot. Thus, many have resigned themselves that this debate will never be settled and, while NHP gives a very appropriate way of rating traction engine, it may never be converted accurately into diesel HP.
Although no longer used commercially, traction engines of all types continue to be maintained and preserved by enthusiastic individuals and are frequently exhibited at agricultural shows in Europe (particularly the UK), Canada and the United States. They are often a main attraction in a
Model traction engines, powered by steam, are manufactured by several companies, notably
Mamodand Wilesco. Larger scale model engines are popular subjects for model engineers to construct, either as a supplied kit of parts, or machined from raw materials.
Traction engines in popular culture
:"See also: Steam rollers on film
1962film The Iron Maidenfeatured a showman's engine as the film's star, along with many others, at the annual rally at Woburn Abbey.
:"See also: Steam rollers in fiction
Trevor the Traction Engineis one of the non-railway characters featured in The Railway Seriesof children's books by the Rev. W. Awdry. Appearing in several of the books, the traction engine was originally 'saved from scrap' by The Vicarof Wellsworth with the help of Edward the Blue Engine. Trevor has also appeared in a number of episodes in the TV spin-off Thomas the Tank Engine and Friends.
*In the book "Gumdrop and The Farmer's Friend", by
Val Biro, the vintage motor-car Gumdrop is rescued from a snowy ditch by "The Farmer's Friend", a traction engine belonging to a local farmer. Some months later, the two vehicles are instrumental in thwarting a pair of car thieves.
The end-papers of the book include a simplified cut-away drawing of the traction engine: a single-cylinder, 6 NHP Fowler light tractor, built in 1903.
Fred Dibnahof Bolton, Englandwas known as a National Institution for the conservation of old traction engines in Great Britain. His television series, Fred Dibnah's Made in Britain, shows him touring the United Kingdomin his rebuilt, 10 tontraction engine.
List of traction engine manufacturers"
* [http://www.ruralhistory.org/nof/victorianfarming/show.php History of mechanisation in farming] – "Timeline, 1700 - 1914 (MERL)"
* [http://www.steam-up.co.uk/traction_engine_history.htm Concise history of the traction engine] – "evolution, from earliest experiments to widespread manufacture, plus definitions of the six main types"
* [http://www.steamploughclub.org.uk/history.htm History of steam ploughing] – "particularly covers the very early years as different techniques were tried"
* [http://www.electricscotland.com/agriculture/page26.htm Transactions of the Highland and Agricultural Society of Scotland] – "(c.1871) report of trial of Fiskens Steam Cultivation Machinery (a windlass ploughing apparatus) -- including description and diagram"
* [http://www.hants.gov.uk/thornycroft/lorries/socialimpact.html Social Impact of Road Haulage] – "Timeline including early development history of steam-powered road vehicles (from Hampshire County Council Museum Service)"
* [http://www.promotex.ca/articles/cawthon/2006/2006-02-01_article.html History of Waterloo Gasoline Traction Engine Company (Iowa)] – "the first gasoline-powered traction engine, and forerunner of the John Deere tractor range"
* [http://www.ranger.demon.co.uk/aveling/aveling.htm "Steam Dinosaur" – world's oldest surviving traction engine] "(plus lots of history of early Aveling products)"
* [http://www.roadloco.org.uk/ The Road Locomotive Society] – "charitable society founded in 1937 for education and research into history of traction engines and portable engines"
* [http://www.steam-era.com/traction_21st_century.htm (Steam-era.com) Aspects of restoring and owning a traction engine]
* [http://www.steam-up.co.uk/ UK Traction engine rallies]
* [http://www.eates.org/ East Anglian Traction Engine Society]
* [http://www.rollag.com Western Minnesota Steam Threshers Reunion]
* [http://www.thresheree.org/ Rock River Thresheree, Inc.]
* [http://www.steamscenes.org.uk/resources/index.html Engine Resources]
* [http://www.ntet.co.uk/ National Traction Engine Trust]
* [http://www.ruralhistory.org/nof/victorianfarming/show.php?command=showmanulist Database of historical agricultural engineering companies of the UK] – "(MERL)"
* [http://www.steamtraction.com/archive Steam Traction magazine – searchable article archive (1951-date)]
"Covers mainly-US traction engines and
steam tractors, threshing machines and steam-powered agricultural machinery."
* [http://www.steamscenes.org.uk Steam Scenes – extensive searchable photo library] – "preserved traction engines in the UK, Europe, Australia and New Zealand"
* [http://www.steam-up.co.uk/traction_engine_galleries.htm Steam-Up – photo library] – "UK-based preserved traction engines"
* [http://www.tractiontime.co.uk Traction Time – vast searchable photo library & discussion forums] – "Information regarding UK-based traction engines"
* [http://tractors.wikia.com/wiki/Category:Traction_Engines Traction engine manufacturers and other information] – "at the Tractor & Construction Plant Wiki"
* [http://www.bseps.org.uk/diagram/engine_diagram.htm Interactive diagram of a traction engine showing major components.]
* [http://www.steam-up.co.uk/useful_terms.htm Glossary of traction engine terminology]
* [http://www.nelmes.fsnet.co.uk/paxman/nhp-defn.htm Definition of Nominal Horse Power (NHP)] – "also see Nominal Horse Power"
Museum of English Rural Life(MERL) – "UK national collection of history of farming"
Great Dorset Steam Fair
Fort Edmonton Park
Steam Era, a festival in Milton, Ontario, Canada
Rough and Tumble Engineers Historical Association, Kinzers, Penn. See http://www.roughandtumble.org
* [http://www.thresheree.org/ Rock River Thresheree, Inc.]
Edgerton, Wisconsin-- Since 1955, annual reunion every Labor Day weekend
Ontario Agricultural Museum
*Austin, Manitoba Museum http://www.ag-museum.mb.ca/
WMSTR- Western Minnesota Steam Thresher's Reunion
* [http://www.nationalthreshers.com/default.htm/ National Threshers Association]
Luckey, Ohio- An association of steam threshers who hold a steam show at the Fulton County Fairgrounds in Wauseon, Ohioduring the last weekend of June every year.
Wikimedia Foundation. 2010.
Look at other dictionaries:
Traction engine — Traction Trac tion, n. [L. trahere, tractum, to draw: cf. F. traction.] 1. The act of drawing, or the state of being drawn; as, the traction of a muscle. [1913 Webster] 2. Specifically, the act of drawing a body along a plane by motive power, as… … The Collaborative International Dictionary of English
traction engine — traction ,engine noun count a vehicle used in the past for pulling heavy loads … Usage of the words and phrases in modern English
traction engine — ► NOUN ▪ a steam or diesel powered road vehicle used (especially formerly) for pulling very heavy loads … English terms dictionary
traction engine — noun steam powered locomotive for drawing heavy loads along surfaces other than tracks • Hypernyms: ↑locomotive, ↑engine, ↑locomotive engine, ↑railway locomotive * * * ˈtraction engine [traction engine traction engines] … Useful english dictionary
traction engine — UK / US noun [countable] Word forms traction engine : singular traction engine plural traction engines a vehicle used in the past for pulling heavy loads … English dictionary
traction engine — towing engine, engine used to pull objects … English contemporary dictionary
traction engine — noun A wheeled steam engine used to move heavy loads, plough ground or to provide power at a chosen location. Syn: road locomotive … Wiktionary
traction engine — A steam or diesel engine used for hauling heavy vehicles on roads or over difficult terrain … Dictionary of automotive terms
traction engine — A means of motive power seldom seen in the present day, being a steam engine used to pull plows or heavy loads on the highway. See tractor … Ballentine's law dictionary
traction engine — a locomotive operating on surfaces other than tracks and pulling heavy loads, as fallen logs. [1855 60] * * * … Universalium