Hydrochloric acid regeneration
Hydrochloric acid regeneration or HCl regeneration refers to a chemical process for the reclamation of bound and unbound HCl from metal chloride solutions as
Field of application
The commercially most relevant field of application for HCl regeneration processes is the recovery of HCl from waste pickle liquors from carbon steel pickling lines. Other applications include the production of metal oxides such as, but not limited, to Al2O3 and MgO as well as rare earth oxides by pyrohydrolysis of aqueous metal chloride or rare earth chloride solutions. A number of different process routes are available. The most widely used is based on
pyrohydrolysisand adiabatic absorption of hydrogen chloride in water, a process invented in the 1960's. However tightening environmental standards and stringent air permit policies render it increasingly difficult to establish new pyrohydrolysis based acid regeneration plants.
The following processes for the regeneration of HCl from spent pickle liquors have been adopted by the ferrous metals processing industry:
**Spray Roaster Pyrohydrolysis
**Fluidised Bed Pyrohydrolysis
Recovery of free HCl
Transformation of FeCl2 to FeCl3
Pyrohydrolysis of Spent Pickle Liquor
Pyrohydrolysis of hydrochloric SPL from carbon steel pickling lines is a hydrometallurgical reaction which takes place according to the following chemical formulae:
4 FeCl2 + 4 H2O + O2 = 8 HCl + 2 Fe2O3
2 FeCl3 + 3 H2O = 6 HCl + Fe2O3
The process is an inversion of the chemical descaling (pickling) process.
Main differences between different implementations of pyrohydrolytic acid regeneration
*Furnace Type (Spray Roaster, Fluidised Bed or Combined Furnace)
*Physical Properties of Iron Oxide By-Product (Ferric Oxide Powder or Pellets)
*Purity and commercial value of Iron Oxide By-Product
**SiO2 content (typically 40 to 1000 ppm)
**specific weight (typically 0.3 to 4 kg per litre)
**specific surface (typically 0.01 to 8 m2/g)
*Energy Consumption (between 600 and 1200 kcal/l)
*Concentration of regenerated acid (typically approx. 18% wt/wt)
*Purity of regenerated acid (remaining Fe content, Cl content)
*Recovery Efficiency (typically 99%)
*Rinse Water Utilization
*Stack Emissions (HCl, Cl2, Dust, CO, NOx)
*Liquid Effluents (composition, amount)
Basic Process Flow Diagram of Spray Roaster Hydrochloric Acid Regeneration Plant
Process Description of Spray Roaster Hydrochloric Acid Regeneration Plant
The metal chloride solution (in the most common case waste pickle liquor from a carbon steel pickling line) is fed to the venturi evaporator (III), where direct mass and heat exchange with the hot roast gas from the roaster (reactor/cyclone) takes place. The separator (IV) separates the gas and liquid phase of the venturi evaporator product. The liquid phase is re-circulated back to the venturi evaporator to increase mass and heat exchange performance.
* approx. 25 to 30% of the waste acid (H2O, HCl) are evaporated
* roast gas is cooled down to approx. 92 to 96 °C
* dust particles are removed from the roast gas
Preconcentrated waste acid from the preconcentrator (III / IV) is injected into the reactor (I) by means of one or more spray booms (VIII) bearing one or more injection nozzles each. Injection takes place at reactor top at a pressure between 4 and 10 bar. The reactor is directly fired by tangentially mounted burners that create a hot swirl. Temperatures inside the reactor vary between 700 °C (burner level) and 370 °C (roast gas exit duct).In the reactor the conversion of droplets of preconcentrated waste acid into iron oxide powder and hydrogen chloride gas takes place. Hydrogen Chloride leaves the reactor through the top, while iron oxide powder is removed from the reactor bottom by means of mechanical extraction devices. A cyclone (II) in the roast gas duct ensures separation and feed back of larger oxide particles carried by the roast gas.
In the absorption column (V) the hydrogen chloride compound of the saturated roast gas leaving the preconcentrator is adiabatically absorbed in water (which in many cases is acid rinse water from a carbon steel pickling line). Regenerated acid (typical strength: 18% wt/wt) is collected at absorption column bottom.
Exhaust Gas Treatment
The roast gas is conveyed through the system by means of an exhaust gas fan (VI). Fans in plants provide pressure increases of approx. 200 mbar and are feedback-controlled to maintain a relative pressure of -3 mbar between reactor and atmosphere to avoid any overpressure-related leakinge of acid gas.To rinse the impeller and cool the gas as well as to remove remaining traces of HCl from the roast gas, the exhaust gas fan is commonly supplied with quenching water, which is separated from the exhaust gas stream by means of a mist eliminator (VII) at the pressure side of the fan.In a final scrubber, commonly consisting of a combination of wet scrubbers such as venturi scrubbers (IX) and scrubber columns (X), remaining traces of HCl and dust are removed. In some plant, absorption chemicals such as NaOH and Na2S2O3 are used to bind HCl and Cl2 (which is created under certain circumstances in several, but not all spray roasting reactors).
Pyrohydrolysis based acid regeneration processes produce a considerable amount of stack emissions containing HCl, particles and Chlorine, which has led to numerous violations of the U.S. clean air act in the past ( [http://regulations.justia.com/view/52449/ Reference] ).
* [http://www.sms-demag.at/Acid_Regeneration_Technology.pdf Introduction into Hydrochloric Acid Regeneration Technology (by SMS Demag)]
* [http://www.hatch.ca/non_ferrous/articles/minimizing_fuelcost.pdf Minimizing Fuel Cost during Regeneration of the HCl Lixiviant (by Hatch)]
Wikimedia Foundation. 2010.
Look at other dictionaries:
Hydrochloric acid — IUPAC name Hydrochloric acid[ … Wikipedia
Regeneration — or regenerative may refer to:In biology:* Bush regeneration, an ecological technique practiced in Australia * Regeneration (biology), the ability to recreate lost or damaged tissues, organs and limbsIn literature:* Regeneration (novel), a prize… … Wikipedia
acid–base reaction — ▪ chemistry Introduction a type of chemical process typified by the exchange of one or more hydrogen ions, H+, between species that may be neutral (molecules, such as water, H2O; or acetic acid, CH3CO2H) or electrically charged (ions, such… … Universalium
Sulfuric acid — Sulfuric acid … Wikipedia
Pickling (metal) — Pickling is a treatment of metallic surfaces in order to remove impurities, stains, rust or scale with a solution called pickle liquor, containing strong mineral acids, before subsequent processing, such as extrusion, rolling, painting,… … Wikipedia
Dependeq — Industrial Plant Engineering GmbH was an Austrian company, headquartered inside Palais Fanto at Schwarzenbergplatz, Vienna with activities in the fields of process engineering and industrial plant supply for the chemical and metallurgical… … Wikipedia
Acide chlorhydrique — Cet article concerne le chlorure d’hydrogène en solution. Pour le gaz, voir Chlorure d hydrogène. Acide chlorhydrique … Wikipédia en Français
13465-05-9 — Acide chlorhydrique Cet article concerne le chlorure d’hydrogène en solution. Pour le gaz, voir Chlorure d hydrogène. Acide chlorhydrique … Wikipédia en Français
7674-01-0 — Acide chlorhydrique Cet article concerne le chlorure d’hydrogène en solution. Pour le gaz, voir Chlorure d hydrogène. Acide chlorhydrique … Wikipédia en Français
Acide Chlorhydrique — Cet article concerne le chlorure d’hydrogène en solution. Pour le gaz, voir Chlorure d hydrogène. Acide chlorhydrique … Wikipédia en Français