Errors and residuals in statistics
In statistics and optimization, statistical errors and residuals are two closely related and easily confused measures of the deviation of a sample from its "theoretical value". The error of a sample is the deviation of the sample from the (unobservable) true function value, while the residual of a sample is the difference between the sample and the estimated function value.
Suppose there is a series of observations from a univariate distribution and we want to estimate the mean of that distribution (the so-called location model). In this case the errors are the deviations of the observations from the population mean, while the residuals are the deviations of the observations from the sample mean.
A statistical error is the amount by which an observation differs from its expected value, the latter being based on the whole population from which the statistical unit was chosen randomly. For example, if the mean height in a population of 21-year-old men is 1.75 meters, and one randomly chosen man is 1.80 meters tall, then the "error" is 0.05 meters; if the randomly chosen man is 1.70 meters tall, then the "error" is −0.05 meters. The expected value, being the mean of the entire population, is typically unobservable, and hence the statistical error cannot be observed either.
A residual (or fitting error), on the other hand, is an observable estimate of the unobservable statistical error. Consider the previous example with men's heights and suppose we have a random sample of n people. The sample mean could serve as a good estimator of the population mean. Then we have:
- The difference between the height of each man in the sample and the unobservable population mean is a statistical error, whereas
- The difference between the height of each man in the sample and the observable sample mean is a residual.
Note that the sum of the residuals within a random sample is necessarily zero, and thus the residuals are necessarily not independent. The statistical errors on the other hand are independent, and their sum within the random sample is almost surely not zero.
One can standardize statistical errors (especially of a normal distribution) in a z-score (or "standard score"), and standardize residuals in a t-statistic, or more generally studentized residuals.
Example with some mathematical theory
and the sample mean
is a random variable distributed thus:
The statistical errors are then
whereas the residuals are
(As is often done, the "hat" over the letter ε indicates an observable estimate of an unobservable quantity called ε.)
This quantity, however, is not observable. The sum of squares of the residuals, on the other hand, is observable. The quotient of that sum by σ2 has a chi-square distribution with only n − 1 degrees of freedom:
It is remarkable that the sum of squares of the residuals and the sample mean can be shown to be independent of each other. That fact and the normal and chi-square distributions given above form the basis of calculations involving the quotient
The probability distributions of the numerator and the denominator separately depend on the value of the unobservable population standard deviation σ, but σ appears in both the numerator and the denominator and cancels. That is fortunate because it means that even though we do not know σ, we know the probability distribution of this quotient: it has a Student's t-distribution with n − 1 degrees of freedom. We can therefore use this quotient to find a confidence interval for μ.
Given an unobservable function that relates the independent variable to the dependent variable – say, a line – the deviations of the dependent variable observations from this function are the errors. If one runs a regression on some data, then the deviations of the dependent variable observations from the fitted function are the residuals.
However, because of the behavior of the process of regression, the distributions of residuals at different data points (of the input variable) may vary even if the errors themselves are identically distributed. Concretely, in a linear regression where the errors are identically distributed, the variability of residuals of inputs in the middle of the domain will be higher than the variability of residuals at the ends of the domain: linear regressions fit endpoints better than the middle. This is also reflected in the influence functions of various data points on the regression coefficients: endpoints have more influence.
Thus to compare residuals at different inputs, one needs to adjust the residuals by the expected variability of residuals, which is called studentizing. This is particularly important in the case of detecting outliers: a large residual may be expected in the middle of the domain, but considered an outlier at the end of the domain.
The stochastic error in a measurement is the error that is random from one measurement to the next. Stochastic errors tend to be gaussian, or normal, in their distribution. That's because the stochastic error is most often the sum of many random errors, and when we add many random errors together, the distribution of their sum looks gaussian, as shown by the Central Limit Theorem. A stochastic error is added to a regression equation to introduce all of the variation in Y that cannot be explained by the included Xs. It is, in effect, a symbol of the inability to model all the movements of the dependent variable.
Alternative uses of "error" in statistics
The use of the term "error" as discussed in the sections above is in the sense of a deviation of a value from a hypothetical unobserved value. At least two other uses also occur in statistics, both referring to observable prediction errors:
Mean square error or mean squared error (abbreviated MSE) and root mean square error (RMSE) refer to the amount by which the values predicted by an estimator differ from the quantities being estimated (typically outside the sample from which the model was estimated).
Sum of squared errors, typically abbreviated SSE or SSe, refers to the residual sum of squares (the sum of squared residuals) of a regression; this is the sum of the squares of the deviations of the actual values from the predicted values, within the sample used for estimation. Likewise, the sum of absolute errors (SAE) refers to the sum of the absolute values of the residuals, which is minimized in the least absolute deviations approach to regression.
- Absolute deviation
- Consensus forecasts
- Deviation (statistics)
- Explained sum of squares
- Lack-of-fit sum of squares
- Error detection and correction
- Innovation (signal processing)
- Innovations vector
- Margin of error
- Mean absolute error
- Propagation of error
- Root mean square deviation
- Sampling error
- Studentized residual
- Type I and type II errors
- Residuals and Influence in Regression, R. Dennis Cook, New York : Chapman and Hall, 1982.
- Applied Linear Regression, Second Edition, Sanford Weisberg, John Wiley & Sons, 1985.
Least squares and regression analysis Computational statistics Correlation and dependence Regression analysis Regression as a
statistical modelPredictor structureNon-standardNon-normal errors
Decomposition of variance Model exploration Background Design of experiments Numerical approximation Applications Regression analysis category - Statistics category · Statistics portal · Statistics outline · Statistics topics Statistics Descriptive statisticsSummary tables Data collectionDesigning studiesUncontrolled studies Statistical inferenceFrequentist inferenceSpecific tests Correlation and regression analysisNon-standard predictorsPartition of variance Categorical, multivariate, time-series, or survival analysis Applications Category · Portal · Outline · Index
Wikimedia Foundation. 2010.
Look at other dictionaries:
statistics — /steuh tis tiks/, n. 1. (used with a sing. v.) the science that deals with the collection, classification, analysis, and interpretation of numerical facts or data, and that, by use of mathematical theories of probability, imposes order and… … Universalium
List of statistics topics — Please add any Wikipedia articles related to statistics that are not already on this list.The Related changes link in the margin of this page (below search) leads to a list of the most recent changes to the articles listed below. To see the most… … Wikipedia
Deviation (statistics) — In mathematics and statistics, deviation is a measure of difference for interval and ratio variables between the observed value and the mean. The sign of deviation (positive or negative), reports the direction of that difference (it is larger… … Wikipedia
Type I and type II errors — In statistics, the terms Type I error (also, α error, or false positive) and type II error (β error, or a false negative) are used to describe possible errors made in a statistical decision process. In 1928, Jerzy Neyman (1894 1981) and Egon… … Wikipedia
Error detection and correction — In mathematics, computer science, telecommunication, and information theory, error detection and correction has great practical importance in maintaining data (information) integrity across noisy channels and less than reliable storage… … Wikipedia
List of basic statistics topics — For a more comprehensive list, see the List of statistics topics. Statistics is a mathematical science pertaining to the collection, analysis, interpretation, and presentation of data. It is applicable to a wide variety of academic disciplines,… … Wikipedia
Relative change and difference — The relative difference, percent difference, relative percent difference, or percentage difference between two quantities is the difference between them, expressed as a comparison to the size of one or both of them. Such measures are unitless… … Wikipedia
Degrees of freedom (statistics) — In statistics, the number of degrees of freedom is the number of values in the final calculation of a statistic that are free to vary. Estimates of statistical parameters can be based upon different amounts of information or data. The number… … Wikipedia
Deviance (statistics) — In statistics, deviance is a quality of fit statistic for a model that is often used for statistical hypothesis testing. The deviance for a model M0 is defined as Here denotes the fitted values of the parameters in the model M0, while denotes the … Wikipedia
Official statistics — on Germany in 2010, published in UNECE Countries in Figures 2011. Official statistics are statistics published by government agencies or other public bodies such as international organizations. They provide quantitative or qualitative information … Wikipedia