In-mould labelling


In-mould labelling

In-mould labelling is a technology used to decorate plastic products during manufacture. Combining the decoration process with the moulding process cuts the total cost, but can increase the manufacturing time. [citebook|title=The Packaging User's Handbook|author=Frank Albert Paine, Institute of Packaging|publisher= Springer|year= 1991|id=ISBN 075140151X|pages=389]

Component functions

Upstream Automation

A typical scenario: An injection moulding machine will have a label-placing robot near to it - sometimes called 'upstream' automation - which supplies either pre-cut labels or automatically cuts the labels from a roll (a 'web').

For a 'typical' product, with a machine cycle time of 5 to 15 seconds, the upstream automation can add 1 or 2 seconds, so it is important to accelerate the process, and get clever with placing movements, to minimize delay.

Labelling

Vacuum and compressed air is generally used to handle the labels, although static electricity can be used. Static 'guns' charge a label while it is being transferred to the moulding machine, so that when the label is placed on the tool and released by the labelling robot, it will wrap itself onto the tool.

Labels may be paper or a similar material to the moulded product. Polypropylene or Polystyrene is commonly used as label material, with a thickness of 15 to 40 micrometres.

Cavitated label material is also used. This is a sandwich material, having a 'spongy' layer bonded between two very thin solid layers. An advantage of cavitated film is better conformance to small-radius curves on a product.

Laminated film can be used to decorate products, yielding high wear-resistance. This type of film has the printed surface protected by a second layer of film, with a thickness of 30 or 40 micrometres. Products using this type of label might include picnic-ware, mouse-mats, or internal automotive components.

In-mould labelling is also a popular method of decorating injection molded parts for consumer electronics. Notebook computer and cellphone manufacturers are adopting IML technology for greater wear resistance than spray painting or pad-printing. IML can provide greater decorating options than other methods. Multi-color screen printed and offset lithography printed graphics are used to produce products with higher quality graphics than available with other decorating methods. Most applications in this area use second surface graphics. The decoration is printed on the back side of a clear substrate, typically polycarbonate or acrylic 0.125mm to 0.375mm thick. The injection plastic is on the ink side of the film. This encapsulates the decoration between the film layer and the injected plastic resulting in a decoration that can't be abraded during use.

Downstream automation

Downstream automation performs any of these tasks: product removal, trimming, inspection or stacking. The mechanics to do these jobs can be incorporated into the upstream automation, so that while a label is placed on one side of a tool, the robot can be removing moulded parts from the other side. Because the labelling operation is simultaneous with the part removal operation, the overhead on cycle time is almost eliminated.

Vision systems can check for accurate label positioning, and can validate label correctness.

ee also

* In-mould decoration
* Plastic injection molding

References


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Mandatory labelling — or labeling (see spelling differences) is the requirement of consumer products to state their ingredients or components. Moral purchasing and problems like allergies are two things which are enabled by labelling. It is mandated in most developed… …   Wikipedia

  • In-mould decoration — In mould decoration, a special type of plastic moulding, is used for decorating plastic surfaces with color and/or with an abrasion resistant coat.PrincipleA carrier foil is placed inside the opened mould. It carries the dried paint layers which… …   Wikipedia

  • Gizeh Verpackungen — GmbH Co. KG Rechtsform GmbH Co. KG Gründung 1920 Sitz Köln Leitung Ralf Jung, Herbert Schlereth Mitarbeiter 560 (2010) …   Deutsch Wikipedia

  • Nutrition facts label — A sample nutrition facts label, with instructions from the U.S. Food and Drug Administration.[1] The nutrition facts label (also known as the nutrition information panel, and various other slight variations) is a label required on most packaged… …   Wikipedia

  • Tobacco packaging warning messages — Smoking warning on the back of a cigarette pack, in Australia Tobacco packaging warning messages are health warning messages that appear on the packaging of cigarettes and other tobacco products. They have been implemented in an effort to enhance …   Wikipedia

  • Label — For other uses, see Label (disambiguation). Shirt with labels …   Wikipedia

  • Printing — is a process for reproducing text and image, typically with ink on paper using a printing press. It is often carried out as a large scale industrial process, and is an essential part of publishing and transaction printing.HistoryWoodblock… …   Wikipedia

  • Owens-Illinois — Inc. Type Public (NYSE: OI) Industry packaging, glass Founded Toledo, Ohio, USA ( …   Wikipedia

  • Glass production — Glass is common in everyday life, from glass windows to glass containers. The manufacture of glass for everyday purposes may involve complexity and automation. This article deals with the mass production of glass. Glass container productionGlass… …   Wikipedia

  • Manchego — Country of origin Spain Region La Mancha Source of milk …   Wikipedia


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.