Ford FE engine

Infobox Automobile engine
name=Ford FE V8
aka=Ford FT V8


manufacturer=Ford Motor Company
production=1958–1976
predecessor=Ford Y-block V8
successor=Ford 335 Cleveland V8
Ford 351 Windsor V8
class=Mid-sized OHV V8
similar=Oldsmobile V8
Buick V8
Pontiac V8
Chrysler FirePower V8
AMC Short/Tall V8
The Ford FE engine was a Ford V8 engine used in vehicles sold in the North American market between 1958 and 1976. A related engine, the Ford FT engine, was used in medium and heavy trucks from 1964 through 1978. The FE filled the need for a medium-displacement engine created by the discontinuation of the Lincoln Y-block V8 engine. The FE joined Ford's other V8s which included a small Y-block and the big block MEL engines.

Usage

FE series engines powered most full-size Fords, some mid-size and performance models, and many Mercurys from 1958 until 1971, and pickup trucks from 1965 through 1976.

Specific models that used FE engines include the AC Cobra MKIII, AC Frua, high-performance Ford Mustangs between 1967 and 1970, many
Ford Galaxies including racing cars, some Ford Fairlanes, Ford Thunderbirds until halfway through 1968, and many others. The FE engine also saw use in industrial applications.

Description

The FE and FT engines are Y-block designs—so called because the cylinder block casting extends below the crankshaft centerline, giving great rigidity but heavy weight. In these engines, the casting extends 3.625 in (92 mm) below the crankshaft centerline, which is more than an inch below the bottom of the crank journals.

All FE and FT engines have a "bore spacing" (distance between cylinder centers) of 4.63 in (118 mm), and a "deck height" (distance from crank center to top of block) of 10.17 in (258 mm). The main journal (crankshaft bearing) diameter is 2.749 in (69.8 mm).

Generation 1

332

The smallest big-block Ford was the 332 of Auto CID|331.8 actual engine displacement, with a convert|4.0|in|mm|2 bore and convert|3.3|in|2 stroke. It was used in Ford-brand cars in 1958 and 1959. A two-barrel version produced Auto bhp|240|1, while a Holley four-barrel version produced Auto bhp|265|1.

hidden begin
title = 332 engine configurations and applications
titlestyle = background:#99FF99; text-align:left;
bodystyle = text-align:left;

* 4V, 9.5:1 — Auto bhp|265|1 at 4600 rpm and auto lbft|360 at 2800 rpm
** 1958 Ford
* 2V, 8.9:1 — Auto bhp|225|1 at 4600 rpm and auto lbft|325 at 2200 rpm
** 1959 Ford
** 1959 Edsel Corsair (called "Express V8")

352

Introduced in 1958 as part of the Interceptor line of Ford V8 engines, the Ford 352 of Auto CID|351.9 actual displacement was the replacement for the Lincoln Y-block. It is a 332 with convert|3.5|in|mm|2 stroke and a convert|4|in|mm|2 bore, and was rated from Auto bhp|208|1 with a 2-barrel carburetor to over Auto bhp|300|1 on the 4-barrel models. When these engines were introduced, they were called Interceptor on the base models and Thunderbird Special on the 4-barrel models. The Interceptor name has caused confusion as many members of the automotive hobbyWho|date=September 2008 mistakenly presume that if it says Interceptor it is a Police Interceptor; in fact the Interceptor was the base-performance engine in 1958. This series of engines usually weighed over convert|650|lb|abbr=onFact|date=June 2008.cite book |title=New Ford Interceptor V-8 Engines |authorlink=Ford Motor Company |year=1957 |publisher=Ford

hidden begin
title = 352 engine configurations and applications
titlestyle = background:#99FF99; text-align:left;
bodystyle = text-align:left;

* 2V
** 8.9:1 — convert|220|hp|kW at 4400 rpm and auto lbft|37 at 2400 rpm
*** 1961-1963 Ford
* 4V
** 10.2:1 — convert|300|hp|kW at 4600 rpm and auto lbft|395 at 2800 rpm
*** 1958 Ford Interceptor (civilian)
*** 1958-1959 Ford
*** 1958-1959 Ford Thunderbird
** 9.6:1 — convert|300|hp|kW at 4600 rpm and auto lbft|380 at 2800 rpm
*** 1960 Ford
*** 1960 Edsel
*** 1960 Ford Thunderbird
** 10.6:1 — convert|360|hp|kW at 6000 rpm and auto lbft|380 at 3400 rpm
*** 1960 Ford
** 8.9:1 — convert|235|hp|kW at 4400 rpm and auto lbft|350 at 2400 rpm
*** 1960 Ford
** 9.3:1 — convert|250|hp|kW at 4400 rpm and auto lbft|352 at 2800 rpm
*** 1964-1966 Ford
** 8.4:1 — convert|208|hp|kW at 4000 rpm and auto lbft|310 at 2800 rpm
*** 1965-1967 Ford F-Series

361 Edsel

Edsel 361 engines were assembled in Cleveland, OH. They were standard equipment in the 1958 Edsel Ranger, Pacer, Villager, Bermuda, and Roundup, and optional in the 1959 Ranger, Corsair, and Villager. Edsel 361 engines were also issued to law enforcement agencies and other emergency municipal services as the 1958 Ford Police Interceptor. There really were no Police Interceptor Fords but the FE engine sold to consumers was the 332 and 352 and was called the "Interceptor" which caused a lot of confusion and misunderstanding as many people mistakenly think if it says Interceptor it is a Police Interceptor.Fact|date=January 2008

hidden begin
title = 361 Edsel engine configurations and applications
titlestyle = background:#99FF99; text-align:left;
bodystyle = text-align:left;

*
* @4600 rpm
* Torque @2900 rpm
* 10.5:1 Compression Ratio
* x convert|3.5|in|mm|2 Bore/Stroke
* 4-bbl Holley carburetor
* Pushrod overhead valve
* Angle-wedge combustion chamber
* Firing order: 1-5-4-2-6-3-7-8
* Cylinder numbering (front-to-rear): Right 1-2-3-4 Left 5-6-7-8
* 18 mm spark plugs, 0.034 in. gap

360 Truck

The 360, of Auto CID|360.7 actual displacement, was introduced in 1968 and phased out at the end of the 1976 year run.used in the Ford F Series trucks and pickups. It is a destroked 390 with a bore of convert|4.05|in|mm|2 and the 352's convert|3.5|in|mm|2 stroke. The 360s were sparse on horsepowerOr|date=September 2008, but had fairly good torque ratings.Fact|date=January 2008 360s were also constructed with heavy duty internal components for truck use. Use of a standard 352/390 cam for use in passenger cars along with carburetor and distributor adjustment gave it the same kind of performance as the 352/390 car enginesFact|date=January 2008. Rated at Auto bhp|215|1 at 4200 rpm and auto lbft|375 of torque @3600 rpm (2-barrel carb, 1968).

hidden begin
title = 360 truck engine configurations and applications
titlestyle = background:#99FF99; text-align:left;
bodystyle = text-align:left;

* 2V, 8.4:1
** Auto bhp|215|1 at 4400 rpm and auto lbft|327 at 2400 rpm
*** 1968-1971 Trucks
** convert|196|hp|kW net at 4000 rpm and auto lbft|327 at 2400 rpm
*** 1972-1975 Trucks

390

The 39, with Auto CID|389.6 true displacement, had a bore of Convert|4.05|in|mm|2 and stroke of convert|3.78|in|mm|2. It was the most common FE engine in later applications, used in many Ford cars as the standard engine as well as in many trucks. It was a popular high-performance engine [cite book
last = Clarke
first = R.M.
authorlink =
title = Musclecar & Hi-Po Engines: Ford Big Block
publisher = Brooklands Books
date = 1992
pages = p. 11
doi =
isbn = 1855201062
] ; although not as powerful as the 427 and 428 models, it provided good performance, particularly in the lighter weight vehicles, and was in much greater supplyFact|date=January 2008. The Auto CID|390 2v is rated at Auto bhp|265|1 @ 4,100 rpm.

hidden begin
title = 390 engine configurations and applications
titlestyle = background:#99FF99; text-align:left;
bodystyle = text-align:left;

* 2V
** 8.9:1 — Convert|250|hp|kW at 4400 rpm and auto lbft|378 at 2400 rpm
*** 1963-1965 Mercury
** 9.4:1 — Convert|266|hp|kW at 4600 rpm and auto lbft|378 at 2400 rpm
*** 1964-1965 Mercury
** 9.5:1 — Convert|275|hp|kW at 4400 rpm and auto lbft|401 at 2600 rpm
*** 1966 Ford
*** 1966 Ford Fairlane
*** 1966 Mercury
*** 1966 Mercury Comet
** 9.5:1 — convert|270|hp|kW at 4400 rpm and auto lbft|401 at 2600 rpm
*** 1967 Ford
*** 1967-1968 Ford Fairlane
*** 1967 Mercury
*** 1967 Mercury Comet
*** 1968 Ford Mustang
*** 1968 Mercury Cyclone GT
*** 1968 Mercury Cougar GT
** 10.5:1 — convert|280|hp|kW at 4600 rpm and auto lbft|427 at 2800 rpm
*** 1968 Ford
*** 1969 Mercury
** 9.5:1 — convert|265|hp|kW at 4400 rpm and auto lbft|401 at 2600 rpm
*** 1968 Ford Fairlane
*** 1968 Ford Torino
*** 1968-1970 Ford
*** 1968-1970 Mercury
** 8.6:1 — convert|255|hp|kW at 4400 rpm and auto lbft|376 at 2600 rpm
*** 1968-1971 Trucks
** 9:1 — convert|255|hp|kW at 4400 rpm and auto lbft|376 at 2600 rpm
*** 1971 Ford, Mercury
** 8.6:1 — convert|201|hp|kW net at 4000 rpm andauto lbft|376 at 2600 rpm
*** 1972-1975 Trucks
* 4V
** 10.6:1 — convert|375|hp|kW at 6000 rpm and auto lbft|427 at 3400 rpm
*** 1961-1962 Ford
** 9.6:1 — convert|300|hp|kW at 4600 rpm and auto lbft|427 at 2800 rpm
*** 1961-1963 Ford
*** 1961-1963 Ford Thunderbird
*** 1963 Mercury
** 9.6:1 — convert|330|hp|kW at 5000 rpm and auto lbft|427 at 3200 rpm
*** 1961-1963 Ford Police Interceptor
*** 1963 Mercury Police Interceptor
** 10.1:1 — 330 hp (246 kW) at 5000 rpm and 427 lb·ft (579 N·m) at 3200 rpm
*** 1964 Ford Police Interceptor
*** 1964 Mercury Police Interceptor
** 11:1 — 300 hp (224 kW) at 4600 rpm and 427 lb·ft (579 N·m) at 2800 rpm
*** 1964-1965 Ford
*** 1964-1965 Mercury
*** 1964-1965 Ford Thunderbird
** 10.5:1 — 315 hp (235 kW) at 4600 rpm and 427 lb·ft (579 N·m) at 2800 rpm
*** 1966-1967 Ford
*** 1966-1968 Ford Thunderbird
*** 1968 Mercury
** 10.5:1 — 335 hp (251 kW) at 4600 rpm and 427 lb·ft (579 N·m) at 3200 rpm
*** 1967, 1969 Ford Mustang
*** 1967, 1969 Ford Fairlane
*** 1967, 1969 Mercury Cyclone GT
*** 1967, 1969 Mercury Cougar GT
*** 1969 Ford Torino
*** 1969 Mercury Montego
** 10.5:1 — 325 hp (242 kW) at 4800 rpm and 427 lb·ft (579 N·m) at 2800 rpm
* 3x2V, 10.6:1
** 401 hp (299 kW) at 6000 rpm and 430 lb·ft (583 N·m) at 3500 rpm
*** 1961-1962 Ford
** 340 hp (254 kW) at 6000 rpm and 430 lb·ft (583 N·m) at 3500 rpm
*** 1962 Ford
*** 1962-1963 Ford Thunderbird

Generation 2

406

[

Ford Galaxie.]

The 406 engine used a new convert|4.13|in|mm|2 bore with the 390's convert|3.78|in|mm|2 stroke, giving a displacement of Auto CID|405.1, generously rounded up to "406" for the official designation. The larger bore required a new block casting with thicker walls but otherwise was very similar to the strengthened 390 high performance block. ["Clarke", p. 11]

The 406 was developed purely for racing and was sold to the public only to meet racing targetsFact|date=January 2008. It was available for less than two years before it was replaced by the 427Fact|date=January 2008.

Testing of the 406, with its higher power levels, led to cross-bolted mains — where the main bearing caps were not only secured by bolts at each end coming up from beneath but also by bolts coming in from the sides through the block to prevent the main bearing caps from working loose under extreme racing conditions. This cross-bolting can be found today in many of the most powerful and modern engines from many manufacturers.

hidden begin
title = 406 engine configurations and applications
titlestyle = background:#99FF99; text-align:left;
bodystyle = text-align:left;

* 4V, 11.4:1 — 385 hp (287 kW) at 5800 rpm and 444 lb·ft (602 N·m) at 3400 rpm
** 1962-1963 Ford
** 1963 Mercury
* 3x2V, 11.4:1 — 405 hp (302 kW) at 5800 rpm and 448 lb·ft (607 N·m) at 3500 rpm
** 1962 Ford
* 3x2V, 12.1:1 — 405 hp (302 kW) at 5800 rpm and 448 lb·ft (607 N·m) at 3500 rpm
** 1963 Ford, Mercury

410

The 410 engine, used only in 1966 and 1967 Mercurys, used the same convert|4.05|in|mm|2 bore as the 390 engine, but with the 428's convert|3.98|in|mm|2 stroke, giving a Auto CID|410.1 real displacement. The standard 428 crankshaft was used, which meant that the 410, like the 428, required external balancingFact|date=January 2008. A compression ratio of 10.5:1 was standard.

hidden begin
title = 410 engine configurations and applications
titlestyle = background:#99FF99; text-align:left;
bodystyle = text-align:left;

* 4V, 10.5:1 — 330 hp (246 kW) at 4600 rpm and 444 lb·ft (602 N·m) at 2800 rpm
** 1966-1967 Mercury

427

Ford's 427 V8 was introduced in 1963 as a race-only engine. It was developed for NASCAR stock car racing, drag racing, and serious street racers. The true displacement of the 427 was actually Auto CID|425, but Ford called it the 427 because Auto CID|427 was the maximum displacement allowed by NASCAR. The stroke was the same as the 390 at convert|3.78|in|mm|2, but the bore was increased to convert|4.23|in|mm|2. The block was made of cast iron with an especially thickened deck to withstand higher compressionFact|date=January 2008. The cylinders were cast using cloverleaf molds—the corners were thicker all down the wall of each cylinderVague|date=March 2008. Many 427s used a steel crankshaft and all were balanced internally. Most 427s used solid valve lifters with the exception of the 1968 block which was drilled for use with hydraulic liftersVague|date=March 2008Fact|date=January 2008.

Two different models of 427 block were produced, the 427 top oiler and 427 side oiler. The top oiler version was the earlier, and delivered oil to the cam and valvetrain first and the crank second. It gained a reputation for insufficient crankshaft lubrication under severe usageFact|date=January 2008; under extremely hard acceleration oil in the pan would tend to slosh back, uncovering the oil pickupFact|date=January 2008. The side oiler block, introduced in 1965, sent oil to the crank first and the cam and valvetrain second. This was similar to the oiling design from the earlier Y-block. The engine was available with low-riser, mid-riser, or high-riser intake manifolds, and either single or double four-barrel carburetion on an aluminum manifold. The single four-barrel setup with the high-riser induction system produces the most powerOr|date=January 2008Fact|date=January 2008. Ford never released an official power ratingFact|date=January 2008. Other models were rated at over 400 hp (299 kW)Fact|date=January 2008. Today, it is relatively easy to produce over convert|600|hp|abbr=on when combining a 428 crank and a 427 block bringing the displacement to 454 cubic inchFact|date=January 2008Or|date=January 2008.

In addition, Ford also produced tunnel-port heads and matching intakes for the FE engine. These lacked the limitations imposed by the other intakes' need to squeeze the intake port between two pushrods by running the pushrods through the intake ports in brass tunnels.

The 427 FE engine is currently enjoying a surge in popularity among Ford enthusiastsFact|date=January 2008. There are now a few companies producing aftermarket aluminum or iron replacement blocks.Fact|date=January 2008

hidden begin
title = 427 engine configurations and applications
titlestyle = background:#99FF99; text-align:left;
bodystyle = text-align:left;

* Low-riser intake, 4V
** 10.9:1 — 390 hp (291 kW) at 5600 rpm and 460 lb·ft (624 N·m) at 3200 rpm
*** 1968 Mercury Cougar GT-E only (it was to be offered in the Ford Mustang, according to early press releases, but there are no records or verification of any factory 427 Mustangs). In the spring of 1968, the 428 Cobra Jet officially replaced the 427; however, leftover 427s were installed until late June of that year, when stocks were depleted.
** 11.6:1 — 410 hp (306 kW) at 5600 rpm and 476 lb·ft (645 N·m) at 3400 rpm
*** 1963-1964 Ford
*** 1963-1964 Mercury
* Low-riser intake, 2x4V
** 12:1 — 425 hp (317 kW) at 6000 rpm and 480 lb·ft (651 N·m) at 3700 rpm
*** 1963 Ford, Mercury
** 11.6:1 — 425 hp (317 kW) at 6000 rpm and 480 lb·ft (651 N·m) at 3700 rpm
*** 1964 Ford, Fairlane, Mercury
* Mid-riser intake, 4V
** 11.6:1 — 410 hp (306 kW) at 5600 rpm and 476 lb·ft (645 N·m) at 3400 rpm
*** 1965-1967 Ford
*** 1965-1967 Mercury
* Mid-riser intake, 2x4V
** 11.6:1 — 425 hp (317 kW) at 6000 rpm and 480 lb·ft (651 N·m) at 3700 rpm
*** 1965-1967 Ford
*** 1965-1967 Mercury

427 SOHC "Cammer"

The Ford Single Overhead Cam (SOHC) 427 V8 engine, familiarly known as the "Cammer","Scale Auto", 6/06, p.15 sidebar.] was released in 1964 to recapture NASCAR dominance from the Chrysler 426 Hemi engine. The Chrysler 426 used extremely large block casting that dwarfed the earlier 392 Hemi. The Ford 427 block was closer dimensionally to the early Hemi's than to the elephantine 426 hemi (Ford FE bore spacing: 4.63"; Chrysler 392 bore spacing: 4.5625"; Ford FE deck height: 10.17"; Chrysler 392 deck height: 10.87"...the 426 Hemi has a deck height of 10.72" and bore spacing of 4.8" by comparison --- both Chrysler hemi's have decks more than a 1/2" taller than the FE).

The engine was based on the ultra high performance 427 side-oiler block, in the Ford FE engine family, providing race-proven durability.Fact|date=January 2008Or|date=January 2008 The block and associated parts were largely unchanged, the main difference being use of an idler shaft instead of the camshaft in the block, which necessitated plugging the remaining camshaft bearing oiling holes.

The heads were newly-designed cast iron items with hemispherical combustion chambers and a single overhead camshaft on each head, operating shaft-mounted roller rocker arms. The valvetrain consisted of valves larger than those on Ford wedge head engines, made out of stainless steel and with sodium-filled exhaust valves to prevent the valve heads from burning, and dual valve springs. This design allowed for high volumetric efficiency at high engine speed.

The idler shaft in the block in place of the camshaft was driven by the timing chain and drove the distributor and oil pump in conventional fashion, with the same practical limit of about 7,000 rpm for the stock oil pump (a maximum of 20.5 US gallons (78 L) of SAE 40W per minute at 70 psi (480 kPa). An additional sprocket on this shaft drove a second, six foot long timing chain, which drove both overhead camshafts. The length of this chain made precision timing of the camshafts a problem at high rpm and necessitated a complex system of idlers.Fact|date=January 2008

The engine also had a then-state-of-the-art transistorized ignition system, running 12 amps of current through a high voltage ignition coil.

All these engines were essentially hand-built with racing in mind.Fact|date=January 2008 Combustion chambers were fully machined to reduce variability.Fact|date=January 2008 Nevertheless, Ford recommended blueprinting the engines before use in racing applications.Fact|date=January 2008 They were rated at 615 hp (458 kW) at 7,000 rpm with a single four-barrel carburetor, and 657 hp (490 kW) at 7,500 rpm with dual four barrel carburetors. Ford sold them via the parts counter, the single four-barrel model as part C6AE-6007-363S, the dual carburetor model as part C6AE-6007-359J for $2350.00 (as of October, 1968).Fact|date=January 2008 Weight of the engine was 680 lb (308 kg). ["Clarke", p. 42 et seq.]

Ford's plan was cut short, however; although Ford sold enough to have the design homologated, NASCAR effectively legislated the SOHC engine out of competition (despite permitting the hemi), and the awaited 1965 SOHC "vs". Hemi competition at the Daytona 500 season opener never occurred. This was the only engine ever banned from NASCAR. Nevertheless, the 427 found its niche in drag racing, powering many altered-wheelbase A/FX Mustangs (after NHRA banned it from stock classes), and becoming the basis for a few supercharged Top Fuel dragsters, including those of Connie Kalitta, Pete Robinson, and Lou Bany (driven by "Snake" Prudhomme).

428

[
Shelby Mustang GT500]

The 427 was impractical to manufacture economically for street use; it required tighter tolerances during manufacture than Ford's regular engine plants could deliverFact|date=January 2008. Therefore, Ford combined attributes that had worked well in previous incarnations of the FE: a convert|3.98|in|mm|2 stroke and a convert|4.13|in|mm|2 bore, creating an easier-to-make engine with nearly the same displacement. The Auto CID|428 engine used a cast nodular iron crankshaft and was externally balanced.

Standard 428 FE engines were fitted to Galaxies (badged simply as '7 Litre') and Thunderbirds in the 1966 and 1967 model years.

hidden begin
title = 428 engine configurations and applications
titlestyle = background:#99FF99; text-align:left;
bodystyle = text-align:left;

* 4V, 10.5:1
** 345 hp (257 kW) at 4600 rpm and 462 lb·ft (626 N·m) at 2800 rpm
*** 1966-1967 Ford
*** 1966-1967 Ford Thunderbird
*** 1966-1967 Mercury
*** 1967 S-55
** 360 hp (269 kW) at 5400 rpm and 459 lb·ft (622 N·m) at 3200 rpm
*** 1966-1968 Ford Police Interceptor
*** 1966-1968 Mercury Police Interceptor
** 340 hp (254 kW) at 4600 rpm and 462 lb·ft (626 N·m) at 2800 rpm
*** 1968 Ford
*** 1968 Mercury
** 360 hp (269 kW) at 5400 rpm and 420 lb·ft (570 N·m) at 3200 rpm
*** 1968 Shelby Cobra GT500
* Cobra-Jet 4V, 10.8:1 — 335 hp (250 kW) at 5200 rpm and 440 lb·ft (597 N·m) at 3400 rpm
** 1968 Ford Mustang
** 1968 Mercury Cougar
** 1968 Shelby GT500KR
* Cobra-Jet and Super Cobra-Jet 4V, 10.6:1 — 335 hp (250 kW) at 5200 rpm and 440 lb·ft (597 N·m) at 3400 rpm
** 1969-1970 Ford Mustang
** 1969-1970 Mercury Cougar
** 1969 Ford Fairlane
** 1969 Ford Torino
** 1969 Mercury Cyclone
* 2x4V, 10.5:1 — 355 hp (265 kW) at 5400 rpm and 420 lb·ft (570 N·m) at 3200 rpm
** 1967 Shelby GT500

428 Cobra Jet

The 428 Cobra Jet, launched in April 1967, was a version of the 428 FE engine built for performance rather than cruising smoothness. The 428 Cobra Jet could be made on a regular production line, not requiring the exacting tolerances required by the 427. The 428SCJ used special cylinder head casting # C8OE-6090-N. This casting had larger intake ports and valves than production FE. The Cobra Jet used a strengthened version of the 428 block with an extra main bearing webbing and thicker main caps than the standard blockFact|date=January 2008. The CJ used heavier connecting rods with a 13/32 rod bolt and a nodular iron crankshaft casting # 1UB. The engine was underratedFact|date=January 2008 at 335 hp (250 kW) at 5200 rpm. The 428 Cobra Jet actually produced 400 to 410 hp (299-306 kW)Or|date=January 2008Fact|date=January 2008.

428 Super Cobra Jet

The 428 Super Cobra Jet used the same top end as the 428 Cobra Jet but the crankshaft, connecting rods, and pistons are different. Cast high-performance pistons, a nodular iron crankshaft casting # 1UA was used as well as heavier 427 "Le Mans" connecting rods with capscrews instead of bolts for greater durabilityFact|date=January 2008. The heavier connecting rods and the removal of the centre counterweight on the crankshaft 1UA, required an external weight on the snout of the crankshaft for balancing. An engine oil cooler was standard equipment with the Drag Pack and 3.9 or 4.3 rear end gear ratiosFact|date=January 2008. This engine was also underratedFact|date=January 2008Or|date=January 2008 at convert|335|hp .

Replacement

With the 428 the FE series block had been taken to the extremes of its capacity; no more growth was possibleFact|date=January 2008. The FE advances in engine technology had allowed its use across 3 decades. These advances included a thinwall casting process that made the engine much lighter in installed applications than the equivalent-displacement engines of Ford's competitorsPOV-statement|date=January 2008Fact|date=January 2008, the use of nodular iron for its crankshafts, and its use of shaft-mounted rocker system and wedge combustion chambers were also leading edge designsDubious|date=March 2008.

In the late 1960s however, Ford reviewed their entire engine family. The 335-series engines, commonly referred to as Cleveland engines, were designed to replace the largest of the small-block Windsor engines, with the 335 beginning at Auto CID|351. The medium range of displacement needs was met by the 400M engine, a Cleveland-style block with a raised deck allowing it to use a longer stroke crankshaft giving a displacement of Auto CID|400. The 385-series engine was to replace the MEL line in large cars and trucks. These began to be fitted to cars starting in 1968. The FE engines were gone from Ford cars by 1972 but lingered in trucks into the mid-1970s. In the late 1970s the Dearborn Engine Plant that produced these engines was completely retooled to produce the 1.6 L engine introduced in the Ford Escort in 1981.

In the late 1980s when both Ford and GM revamped their V8 offerings, many of the FE's designs were incorporated in the new engines, including the deep skirt, cross-bolting of the mains and thinwall castingFact|date=January 2008.

References

Further reading

*cite book | author=Peter C Sessler | title=Ultimate American V8 Engine Data Book | publisher=MotorBooks/MBI Publishing Company | year=1999 | id=ISBN 0-7603-0489-0
*cite book | author=Steve Christ | title=How to Rebuild Big-Block Ford Engines | location=New York | publisher=Berkeley Publishing Group | year=1983 | id=ISBN 0-89586-070-8

External links

* [http://www.fordclassics.com/enginespecs.html Short descriptions of Ford overhead valve V8 engines]


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Ford Modular engine — Manufacturer Ford Motor Company Also called Ford Triton Lincoln InTech Ford Coyote …   Wikipedia

  • Ford Duratec engine — Manufacturer Ford Production 1993–present Displacement 1.3 L (79 CID) 1.4 L 1.6 L (97 CID) 1.8 L (110 …   Wikipedia

  • Ford 335 engine — Ford 335 V8 Manufacturer Ford Motor Company Also called Ford Cleveland V8 Production 1970–1985 …   Wikipedia

  • Ford Zetec engine — Ford Motor Company used the Zetec name on a variety of Inline 4 cylinder automobile engines. It was coined to replace Zeta on a range of 1.6 L to 2.0 L multi valve engines introduced in 1991. The company used the name widely in European… …   Wikipedia

  • Ford Cyclone engine — Manufacturer Ford Motor Company Also called Duratec 35 Duratec 37 Mazda MZI EcoBoost Production …   Wikipedia

  • Ford Duratorq engine — The Ford Duratorq engine, commonly referred to as Duratorq, is the marketing name of a range of Ford diesel engines first introduced in 2000 for the Ford Mondeo range of cars. The first design, codenamed Puma during its development, replaced the… …   Wikipedia

  • Ford Windsor engine — Infobox Automobile engine name = Ford Windsor V8 aka = manufacturer = Ford Motor Company type = V8 bore = stroke = displacement = 221,255,260,289,302,351 length = diameter = width = height = weight = block = Cast Iron head = valvetrain = OHV… …   Wikipedia

  • Ford Pinto engine — The Ford Pinto engine is the unofficial but generic nickname for a 4 cylinder internal combustion engine built by the Ford Europe. In Ford sales literature it was referred to as the EAO or OHC engine, it is also sometimes called the Metric engine …   Wikipedia

  • Ford Sigma engine — The Ford Sigma is a small straight 4 automobile engine sold by Ford Motor Company as the Zetec SE and by Mazda as the MZI . The engine was introduced in the mid 1990s and production continues through the present. Like the SHO V6 and SHO V8, the… …   Wikipedia

  • Ford CVH engine — The letters CVH denote a particular type of 4 cylinder internal combustion engine produced by the Ford Motor Company during the 1980s and 1990s. The CVH ( Compound Valve angle Hemispherical combustion chamber ) engine was introduced by Ford in… …   Wikipedia


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.