Roof construction

This article is about house construction that consists of beams and an outer weatherproof skin, as found on most domestic architecture. Such roofs may take a number of different shapes.

Construction of a ridged roof

A simple ridged roof consists of inclined rafters that rest on horizontal wall-plates on top of each wall. The top ends of the rafters meet at the horizontal ridge plate or ridge beam. Horizontal purlins are fixed to the rafters to support the roof covering. Heavier under purlin are used to support longer rafter spans. Tie beams or ceiling joists, are connected between the lower ends of opposite rafters to prevent them from spreading and forcing the walls apart. Collar beams or collar ties may be fixed higher up between opposite rafters for extra strength. [ [http://ah.bfn.org/a/DCTNRY/r/roofframing.html"Illustrated Architecture Dictionary" on "Buffalo Architecture and History"] ]
The rafters, tie beams and joists serve to transmit the weight of the roof to the walls of the building. There are a number of structural systems employed to facilitate this, including the use of wall-plates set at the top of the wall, hammer-beams, which spread the weight down the wall and create an equilibrium between outward and upward thrust, king posts which transfer the weight of the roof ridge, and various types of trusses.

In cyclone and hurricane prone areas the main engineering consideration is to hold the roof down during severe storms. Every component of the roof (as of course the rest of the structure) has to withstand the uplift forces of high wind speeds. This is not normally a problem in areas not prone to high wind.

Modern roofing technologies, apparent in the accompanying photo of a house under construction in a cyclone-prone region of Northern Australia, include the purpose-made steel hook bracket which is bolted to the truss with M16 bolt. The bracket is bolted to an M16 bolt cast in situ, embedded 300 mm into the reinforced concrete block wall. This system is typically in place every 900 mm around perimeter.

Commercially available roofing materials

The weather proofing material is the topmost or outermost layer, exposed to the weather. Many different kinds of materials have been used as weather proofing material:

* Thatch is roofing made of plant stalks in overlapping layers. [Thatching Information. [http://thatch.org/] ]
** Wheat Straw, widely used in England, France and other parts of Europe.
**Seagrass, used in coastal areas where there are esturies such as Scotland. Has a longer life than straw. Claimed to have a life in exccess of 60 years. [as claimed by McGhee & Co. Roof Thatchers. [http://www.thatching.com/] ]
* Shingles, called "shakes" in North America. "Shingles" is the generic term for a roofing material that is in many overlapping sections, regardless of the nature of the material. The word is also used specifically to denote shingles made of wood.
** Redcedar. Life expectancy, up to 30 years. [Wood shakes and shingles. [http://72.14.253.104/search?q=cache:ks1Ak33enMsJ:www.pathnet.org/si.asp%3Fid%3D517+Wood+shingles&hl=en&ct=clnk&cd=5&gl=au] ] However, young growth redcedar has a short life expectancy. High cost. Should be allowed to breathe. [Hometips - Wooden shingle roofing, with good diagrams. [http://hometips.com/content/shingle_intro.html] ]
** Hardwood. Very durable roofing found in Colonial Australian architecture, its use now limited to restorations.
* Slate. High cost with a life expectancy of up to 200 years. [Slate Roof Central. [http://www.slateroofcentral.com/identify.html] ] Slate cleaves into thin sheets, making it much lighter than concrete tiles, though heavier than sheet steel and other light roofcoverings.
* Stone slab. Heavy stone slabs (not to be confused with slate) 1"-2" thick were formerly used as roofing tiles in some regions in England. Stone slabs require a very heavyweight roof structure, but their weight makes them stormproof. An obsolete roofing material.
* Ceramic tile. High cost, life of more then 100 years. [Renaissance Roofing. [http://www.claytileroof.com/contracting_services/historic_renovation.asp] ]
** Imbrex and tegula, style dating back to ancient Greece and Rome.
* Metal shakes or shingles. Long life. High cost, suitable for roofs of 3/12 pitch or greater. Because of the flexibility of metal, they can be manufactured to lock together, giving durability and reducing assembly time. [HomeTips: Metal shingle roofing. [http://hometips.com/cs-protected/guides/metal_roofs/metalroof_shingles.html] ]
* Mechanically seamed metal. Long life. High cost, suitable for roofs of low pitch such as 0.5/12 to 3/12 pitch.
* Concrete, usually reinforced with fibres of some sort. Concrete tiles require a stronger roof structure than slate, as some owners have found to their cost.
* Asphalt shingle, made of bitumen embedded in an organic or fiberglass mat, usually covered with colored, man-made ceramic grit. Cheaper than slate or tiles. Various life span expectancies.
* Asbestos shingles. Very long lifespan, fireproof and low cost but now rarely used because of health concerns. [Asbestos and Your Health, Victorian Government. [http://www.betterhealth.vic.gov.au/BHCV2/bhcarticles.nsf/pages/Asbestos_and_your_health?open] ] [Asbestos Diseases Advisory Service. [http://www.asbestosdiseases.org.au/asbestosinfo/asbestos_community.htm] ]
* Membrane. membrane roofing is in large sheets, generally fused in some way at the joints to form a continuous surface.
** Thermoset membrane (e.g. EPDM rubber). Synthetic rubber sheets adhered together with contact adhesive or tape. Primary application is big box store with large open areas.
** Thermoplastic (e.g. PVC, TPO, CSPE). Plastic sheets welded together with hot air creating one continuous sheet membrane. Can be rewelded with the exception of CSPE. Lends itself well to both big box and small roof application because of its hot air weldability.
** Modified bitumen - heat welded, asphalt adhered or installed with adhesive. Asphalt is mixed with polymers such as APP or SBS, then applied to fiberglass and/or polyester mat, seams sealed by locally melting the asphalt with heat, hot mopping of asphalt, or adhesive. Lends itself well to most applications.
** Built-Up Roof - Multiple plies of asphalt saturated organic felt or coated fiberglass felts. Plies of felt are adhered with hot asphalt, coal tar pitch or adhesive.
** Sprayed-in-Place Polyurethane Foam (SPUF) - Foam sprayed in-place on the roof, then coated with a wide variety of coatings, or in some instances, covered with gravel.
** Fabric
*** polyester.
*** PTFE, (synthetic fluoropolymer) embedded in fibreglass.
* Metal roofing. Generally a relatively inexpensive building material, unless copper is used.
** Galvanised steel frequently manufactured with wavy corrugations to resist lateral flexing and fitted with exposed fasteners. Widely used for low cost and durability. Sheds are normally roofed with this material. Known as "Gal iron" or "Corro", it was the most extensively used roofing material of 20th century Australia, now replaced in popularity by steel roofing coated with an alloy of zinc and aluminium, claimed to have up to four times the life of galvanized steel. [Bluescope. [http://www.bluescopesteel.com.au/go/brands/zincalume-steel] ]
** Standing-seam metal with concealed fasteners.
** Mechanically seamed metal with concealed fasteners contains sealant in seams for use on very low sloped roofs.
** Flat-seam metal with soldered seams.

ee also

*Roof garden
*Tented roof
*Cool Roof
*Building construction
*Building envelope
*Green roof
*Metal roof
*Metal Roofing Alliance
*Roofer
*Roofing felt
*Tensile architecture
*Thin-shell structure
*Tile

References

Further reading

* Francis Ching; "Building Construction Illustrated", "Visual Dictionary of Architecture", "Architecture: Form, Space, and Order."

External links

* [http://www.flatroof.org/html/innovations.html Roof innovations and patents]


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Domestic roof construction — Main article: Roof Section through a house roof showing names for parts of the structure. (UK and Australia) This article is about the type of roof construction that consists of footings and an outer weatherproof skin, as found on most domestic… …   Wikipedia

  • Traditional Korean roof construction — has traditionally used many kinds of natural materials. They are made of neowa (shingle), giwa (tiles), byeotjib (rice Straw), stone giwa (tiles), eoksae (eulalia) and goolpy (oak bark)Neowa (Shingle) RoofNeowajib (a shingle roofed house) can be… …   Wikipedia

  • Construction worker — Carpenter at work in Tennessee, June 1942 Occupation Activity sectors Construction Description Competencies Manual dex …   Wikipedia

  • Construction of Assembly Hall (Champaign) — The construction of the Assembly Hall (Champaign) consisted of building a huge indoor arena with a 400 foot diameter (120 m) concrete dome whose center height is 125 feet (38 m) above the center floor which weighs 10 million pounds.[1]… …   Wikipedia

  • Roof pitch — Relates to the slope and inclination angle of a roof in building construction. A roof is considered pitched with a gradient greater than 15 degrees (slope greater than 3.215 in 12).Carpenters frame (build) rafters to pitch a roof. A roof s pitch… …   Wikipedia

  • Roof — Roof, n. [OE. rof, AS. hr?f top, roof; akin to D. roef cabin, Icel. hr?f a shed under which ships are built or kept; cf. OS. hr?st roof, Goth. hr?t. Cf. {Roost}.] 1. (Arch.) The cover of any building, including the roofing (see {Roofing}) and all …   The Collaborative International Dictionary of English

  • Roof plate — Roof Roof, n. [OE. rof, AS. hr?f top, roof; akin to D. roef cabin, Icel. hr?f a shed under which ships are built or kept; cf. OS. hr?st roof, Goth. hr?t. Cf. {Roost}.] 1. (Arch.) The cover of any building, including the roofing (see {Roofing})… …   The Collaborative International Dictionary of English

  • Roof edge protection — is fall protection equipment most commonly used during the construction of commercial buildings or residential housing.Legal requirementsMany US federal and state laws require building contractors to implement measures to prevent workers falling… …   Wikipedia

  • Roof — A roof is the covering on the uppermost part of a building. A roof protects the building and its contents from the effects of weather. Structures that require roofs range from a letter box to a cathedral or stadium, dwellings being the most… …   Wikipedia

  • Construction site safety — A site safety sign at a highway overpass construction site describing the mandatory safety procedures and equipment. Construction is the most dangerous land based work sector in Europe, after the fishing industry. In the European Union, the fatal …   Wikipedia


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.