Gravity (alcoholic beverage)

A floating hydrometer in use to test the specific gravity of beer

Gravity, in the context of fermenting alcoholic beverages, refers to the specific gravity, or relative density compared to water, of the wort or must at various stages in the fermentation. The concept is used in brewing and wine making industry. Specific gravity is measured by a hydrometer, pycnometer or oscillating U-tube electronic meter.

The density of a wort is largely dependent on the sugar content of the wort. During alcohol fermentation, yeast converts sugars into carbon dioxide and alcohol. The decline in the sugar content and the presence of ethanol (which is appreciably less dense than water) drop the density of the wort. The percentage of alcohol can be calculated from the difference between the original gravity (abbreviated OG) of the wort and the current specific gravity (abbreviated SG) of wort. By monitoring the decline in SG over time the brewer obtains information about the health and progress of the fermentation and determines that it is complete when gravity stops declining. If the fermentation is finished, the specific gravity is called the final gravity (abbreviated FG). For example, for a typical strength beer, OG could be 1.050 and FG could be 1.010.

Several different scales have been used for the original gravity. For historical reasons, brewing industry largely uses Plato (°P), which is essentially the same as Brix used by wine industry. For example, OG 1.050 is roughly equivalent to 12°P.

By considering the original gravity, the brewer or vintner obtains an indication as to the probable ultimate alcoholic content of his product. The OE is often referred to as the "size" of the beer and is, in Europe, often printed on the label as Stammwürze or sometimes just as a percent. In the Czech Republic, for example, they speak of "10 degree beers", "12 degree beers" which refers to the gravity in Plato of the wort before the fermentation.


Terms related to gravity

Specific gravity

Specific gravity is the ratio of the density of a sample to the density of water. The ratio depends on the temperature and pressure of both the sample and water. The pressure is always considered (in brewing) to be 1 atmosphere (1013.25 hPa) and the temperature is usually 20°C for both sample and water but in some parts of the world different temperatures may be used and there are hydrometers sold calibrated to, for example, 60°F. It is important, where any conversion to °P is involved, that the proper pair of temperatures be used for the conversion table or formula being employed. The current ASBC table is (20°C/20°C) meaning that the density is measured at 20°C and referenced to the density of water at 20°C (0.998203 g/cc). Mathematically

 SG_\text{true} = {\rho_\text{sample} \over \rho_\text{water}}

This formula gives the true specific gravity i.e. based on densities. Brewers cannot (unless using a U-tube meter) measure density directly and so must use a hydrometer, whose stem is bathed in air, or pycnometer weighings which are also done in air. Hydrometer readings and the ratio of pycnometer weights are influenced by air (see article Specific Gravity for details) and are called "apparent" readings. True readings are easily obtained from apparent readings by

SG_\text{true} = SG_\text{apparent} - {\rho_\text{air} \over \rho_\text{water} }(SG_\text{apparent}-1)

However, the ASBC table uses apparent specific gravities, so many electronic density meters will produce the correct °P numbers automatically.

Original Gravity (OG); Original Extract (OE)

The Original Gravity is the specific gravity measured before the commencement of fermentation. From it the analyst can compute the Original Extract which is the mass (grams) of sugar in 100 grams of wort (°P) by use of the Plato scale. The symbol p will denote OE in the formulas which follow.

Final Gravity (FG); Apparent Extract (AE)

The Final Gravity is the specific gravity measured at the completion of fermentation. The Apparent Extract, denoted m, is the °P obtained by inserting the FG into the formulas or tables in the Plato article. The use of "apparent" here is not to be confused with the use of that term to describe specific gravity readings which have not been corrected for the effects of air.

True extract (TE)

The amount of extract which was not converted to yeast biomass, carbon dioxide or ethanol can be estimated by removing the alcohol from beer which has been degassed and clarified by filtration or other means. This is often done a part of a distillation in which the alcohol is collected for quantitative analysis but can also be done by evaporation in a water bath. If the residue is made back up to the original volume of beer which was subject to the evaporation process, the specific gravity of that reconstituted beer measured and converted to Plato using the tables and formulas in the Plato article then the TE is

 n = P_{recon}{SG_{recon} \over SG_{beer}}

See the Plato article for details. TE is denoted by the symbol n. This is the number of grams of extract remaining in 100 grams of beer at the completion of fermentation.

Alcohol content

Knowing the amount of extract in 100 grams of wort before fermentation and the number of grams of extract in 100 grams of beer at its completion, the amount alcohol (in grams) formed during the fermentation can be determined. The formula follows, attributed to Balling[1]

 A_w = {(p - n) \over (2.0665 - 1.0665p/100)} = f_{pn}(p - n)

where f_{pn} = {1 \over (2.0665 - 1.0665p/100) },gives the number of grams of alcohol per 100 grams of beer i.e. the ABW. Note that the alcohol content depends not only on the diminution of extract (pn) but also on the multiplicative factor fpn which depends on the OE. De Clerck[2] tabulated Ballings values for fpn but they can be calculated simply from p

 f_{pn} = {1 \over (2.0665 - 1.0665p/100)} = 0.48394 + 0.0024688p + 0.00001561p^2

This formula is fine for those who wish to go to the trouble to compute TE (whose real value lies in determining attenuation) which is only a small fraction of brewers. Others want a simpler, quicker route to determining alcoholic strength. This lies in Tabarie's Principle[3] which states that the depression of specific gravity in beer to which ethanol is added is the same as the depression of water to which an equal amount of alcohol (on a w/w basis) has been added. Use of Tabarie's principle lets us calculate the true extract of a beer with apparent extract m as

 n =P(P^{-1}(m) + 1 - \frac {\rho_\text{EtOH}(A_w)} { \rho_\text{water}})

where P is a function that converts SG to °P (see Plato) and P − 1 (see Plato) its inverse and ρEtOH(Aw) is the density of an aqueous ethanol solution of strength Awby weight at 20 °C. Inserting this into the alcohol formula the result, after rearrangement, is

  {\left[p - P\left(P^{-1}(m) + 1 - \frac {\rho_\text{EtOH}(A_w)} { \rho_\text{water}}\right)\right] \over (2.0665 - 1.0665p/100)} - A_w = 0

Which can be solved, albeit iteratively, for Aw as a function of OE and AE. It is again possible to come up with a relationship of the form

 A_w = f_{pm}(p - m)\,

De Clerk also tabulates values for fpm = 0.39661 + 0.001709p + 0.000010788p2.

Most brewers and consumers are used to having alcohol content reported by volume (ABV) rather than weight. Interconversion is simple but the specific gravity of the beer must be known:

 A_v = A_w{SG_\text{beer} \over 0.79661}

This is the number of cc of ethanol in 100 cc of beer.

Because ABV depends on multiplicative factors (one of which depends on the original extract and one on the final) as well as the difference between OE and AE it is impossible to come up with a formula of the form

 A_v = k(p-m)\,

where k is a simple constant. Because of the near linear relationship between extract and (SG-1) (see specific gravity) in particular because  p \approx 1000(SG-1)/4 the ABV formula is written as

 A_v = 250f_{pm}(OG -FG){SG_\text{beer} \over 0.79661}

If the value given above for fpm corresponds to an OE of 12°P which is 0.4187, and 1.010 can be taken as a typical FG then this simplifies to

 A_v = 132.715(OG - FG) =  (OG - FG)/0.00753\,

With typical values of 1.050 and 1.010 for, respectively, OG and FG this simplified formula gives an ABV of 5.31% as opposed to 5.23% for the more accurate formula. Formulas for alcohol similar to this last simple one abound in the brewing literature and are very popular among home brewers. Formulas such as this one make it possible to mark hydrometers with "potential alcohol" scales based on the assumption that the FG will be close to 0 which is more likely to be the case in wine making than in brewing and it is to vintners that these are usually sold.


The drop in extract during the fermentation divided by the OE represents the percentage of sugar which has been consumed. The Real Degree of Attenuation (RDF) is based on TE

 RDF = 100 {(p-n)\over p}

and the Apparent Degree of Fermentation (ADF) is based on AE

 ADF = 100 {(p-m) \over p} \approx 100 {(OG-FG) \over (OG-1)}

Because of the near linear relationship between (SG-1) and °P specific gravities can be used in the ADF formula as shown.

Brewer's points

Many brewers like to exploit the near linear relationship between (SG -1) and °P to simplify calculations considerably. They define

 p_t := 1000(SG-1)\, ,

call it "points" or "brewer's points" or "excess gravity" and use it as if it were extract. The Plato degree is thus approximately the points divided by 4:

 p \approx p_t/4 = 1000(SG-1)/4.

As an example, a wort of SG 1.050 would be said to have 50 points, and have Plato degree of approximately 12.5 °P.

Points can be used in the ADF and RDF formulas. Thus a beer with OG 1.050 which fermented to 1.010 would be said to have attenuated 100*(50 - 10)/50 = 80%. Points can also be used in the SG versions of the alcohol formulas. It is simply necessary to multiply by 1000 as points are 1000 times (SG-1).

See also


  1. ^ De Clerck, J. A textbook of Brewing, Translated by Kathleen Barton-Wright, Chapman & Hall,, London 1958 Vol. II p427
  2. ^ De Clerck, op. cit, Vol. II p428
  3. ^ De Clerck, op. cit, Vol. II p428

Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Alcohol proof — is a measure of how much alcohol (ethanol) is contained in an alcoholic beverage. The term was originally used in the United Kingdom and was defined as 7/4 times the alcohol by volume (abv). The UK now uses the abv standard instead of alcohol… …   Wikipedia

  • distilled spirit — ▪ alcoholic beverage Introduction also called  distilled liquor,    alcoholic beverage (such as brandy, whisky, rum, or arrack) that is obtained by distillation from wine or other fermented fruit or plant juice or from a starchy material (such as …   Universalium

  • Beer — This article is about the alcoholic beverage. For other uses, see Beer (disambiguation). Schlenkerla Rauchbier straight from the cask …   Wikipedia

  • Sake — For other uses, see Sake (disambiguation). Dedicated sake barrels at Itsukushima Shrine …   Wikipedia

  • Four Loko — Type Malt liquor Manufacturer Phusion Projects LLC, Chicago, Illinois Country of origin USA …   Wikipedia

  • Cider — This article is about the alcoholic beverage. For the non alcoholic beverage, see Apple cider. For software, see TransGaming Technologies. Cider in a pint glass Cider or cyder (pronounced /ˈsaɪdər/ …   Wikipedia

  • beer — /bear/, n. 1. an alcoholic beverage made by brewing and fermentation from cereals, usually malted barley, and flavored with hops and the like for a slightly bitter taste. 2. any of various beverages, whether alcoholic or not, made from roots,… …   Universalium

  • Beer — /bear/, n. Thomas, 1889 1940, U.S. author. * * * I Alcoholic beverage made usually from malted barley, flavoured with hops, and brewed by slow fermentation. Known from ancient times, beer was especially common in northern climates not conducive… …   Universalium

  • Ethanol — For other uses, see Ethanol (disambiguation). Grain alcohol redirects here. It is not to be confused with Neutral grain spirit. Ethanol …   Wikipedia

  • Mead — This article is about the alcoholic beverage. For other uses, see Mead (disambiguation). Mead Mead (   …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.