# Bandwidth (signal processing)

﻿
Bandwidth (signal processing)

Bandwidth is the difference between the upper and lower cutoff frequencies of, for example, a filter, a communication channel, or a signal spectrum, and is typically measured in hertz. In case of a baseband channel or signal, the bandwidth is equal to its upper cutoff frequency. Bandwidth in hertz is a central concept in many fields, including electronics, information theory, radio communications, signal processing, and spectroscopy.

In computer networking and other digital fields, the term "bandwidth" often refers to a data rate measured in bits per second, for example network throughput. The reason is that according to Hartley's law, the digital data rate limit (or channel capacity) of a physical communication link is related to its bandwidth in hertz, sometimes denoted "analog bandwidth". For "bandwidth" as a computing term, less ambiguous terms are bit rate, throughput, goodput or channel capacity.

Overview

Bandwidth is a key concept in many telephony applications. In radio communications, for example, bandwidth is the range of frequencies occupied by a modulated carrier wave, whereas in optics it is the width of an individual spectral line or the entire spectral range.

In many signal processing contexts, bandwidth is a valuable and limited resource. For example, an FM radio receiver's tuner spans a limited range of frequencies. A government agency (such as the Federal Communications Commission in the United States) may apportion the regionally available bandwidth to licensed broadcasters so that their signals do not mutually interfere. Each transmitter owns a slice of bandwidth, a valuable (if intangible) commodity.

For different applications there are different precise definitions. For example, one definition of bandwidth could be the range of frequencies beyond which the frequency function is zero. This would correspond to the mathematical notion of the support of a function (i.e., the total "length" of values for which the function is nonzero). A less strict and more practically useful definition will refer to the frequencies where the frequency function is "small". Small could mean less than 3 dB below (i.e., less than half of) the maximum value, or more rarely 10 dB below, or it could mean below a certain absolute value. As with any definition of the "width" of a function, many definitions are suitable for different purposes.

Analog systems

For analog signals, which can be mathematically viewed as functions of time, bandwidth BW or $Delta f$ is the width, measured in hertz, of the frequency range in which the signal's Fourier transform is nonzero. Because this range of non-zero amplitude may be very broad, this definition is often relaxed so that the bandwidth is defined as the range of frequencies where the signal's Fourier transform has a power above a certain amplitude threshold, commonly half the maximum value, or −3 dB. [cite book
title=Network Analysis
edition=3rd edition
last=Van Valkenburg
first=M. E.
pages=pp. 383-384
isbn=0-13-611095-9
url=http://www.amazon.com/Network-Analysis-Mac-Van-Valkenburg/dp/0136110959
accessdate=2008-06-22
] Bandwidth of a signal is a measure of how rapidly its parameters (e.g., amplitude and phase) fluctuate with respect to time. Hence, the greater the bandwidth, the faster the variation in the signal parameters may be. The wordbandwidth applies to signals as described above, but it could also apply to "systems", for example filters or communication channels. To say that a system has a certain bandwidth means that the system can process signals of that bandwidth.

A baseband bandwidth is synonymous to the upper cutoff frequency, i.e. a specification of only the highest frequency limit of a signal. A non-baseband bandwidth is a difference between highest and lowest frequencies.

As an example, the (non-baseband) 3-dB bandwidth of the function depicted in the figure is $Delta f = f_2 - f_1 ,$, whereas other definitions of bandwidth would yield a different answer.

A commonly used quantity is "fractional bandwidth". This is the bandwidth of a device divided by its center frequency. E.g., a device that has a bandwidth of 2 MHz with center frequency 10 MHz will have a fractional bandwidth of 2/10, or 20%.

The fact that real baseband systems have both negative and positive frequencies can lead to confusion about bandwidth, since they are sometimes referred to only by the positive half, and one will occasionally see expressions such as $B = 2W$, where $B$ is the total bandwidth, and $W$ is the positive bandwidth. For instance, this signal would require a lowpass filter with cutoff frequency of at least $W$ to stay intact.

The 3 dB bandwidth of an electronic filter is the part of the filter's frequency response that lies within 3 dB of the response at its peak, which is typically at or near its center frequency.

In signal processing and control theory the bandwidth is the frequency at which the closed-loop system gain drops 3 dB below peak.

In basic electric circuit theory when studying Band-pass and Band-reject filters the bandwidth represents the distance between the two points in the frequency domain where the signal is $frac\left\{1\right\}\left\{sqrt\left\{2$ of the maximum signal amplitude (half power).

Photonics

In photonics, the term "bandwidth" occurs in a variety of meanings:
*the bandwidth of the output of some light source, e.g., an ASE source or a laser; the bandwidth of ultrashort optical pulses can be particularly large
*the width of the frequency range that can be transmitted by some element, e.g. an optical fiber
*the gain bandwidth of an optical amplifier
*the width of the range of some other phenomenon (e.g., a reflection, the phase matching of a nonlinear process, or some resonance)
*the maximum modulation frequency (or range of modulation frequencies) of an optical modulator
*the range of frequencies in which some measurement apparatus (e.g., a powermeter) can operate
*the data rate (e.g., in Gbit/s) achieved in an optical communication system; see bandwidth (computing).

A related concept is the spectral linewidth of the radiation emitted by excited atoms.

ee also

* (Wiktionary entry)
*Bandwidth efficiency
*Bandwidth extension
*Narrowband
*Modulation
*Q-factor
*Shannon–Hartley theorem
*Wideband

References

Wikimedia Foundation. 2010.

### Look at other dictionaries:

• Digital signal processing — (DSP) is concerned with the representation of discrete time signals by a sequence of numbers or symbols and the processing of these signals. Digital signal processing and analog signal processing are subfields of signal processing. DSP includes… …   Wikipedia

• Digital Signal Processing — WikiV When applied to video cameras, DSP means that the analog signal from the CCD sensors is converted to a digital signal. It is then processed for signal separation, bandwidth settings and signal adjustments. After processing, the video signal …   Audio and video glossary

• Bandwidth — has several related meanings:* Bandwidth (computing): a rate of data transfer, or bit rate, measured in bits per second * Bandwidth (signal processing): a measure of the width of a range of frequencies, measured in hertz * Spectral linewidth: the …   Wikipedia

• Bandwidth extension — of signal is defined as the deliberate process of expanding the frequency range (bandwidth) of a signal in which it contains an appreciable and useful content, and/or the frequency range in which its effects are such. Its significant advancement… …   Wikipedia

• Bandwidth expansion — is a technique for widening the bandwidth or the resonances in an LPC filter. This is done by moving all the poles towards the origin by a constant factor gamma. The bandwidth expanded filter A (z) can be easily derived from the original filter… …   Wikipedia

• Signal-to-noise ratio — For signal to noise ratio in statistics, see Cohen s d. Signal to noise ratio (often abbreviated SNR or S/N) is a measure used in science and engineering that compares the level of a desired signal to the level of background noise. It is defined… …   Wikipedia

• Bandwidth (computing) — For other uses, see Bandwidth. In computer networking and computer science, bandwidth,[1] network bandwidth,[2] data bandwidth,[3] or digital bandwidth[4][5] is a measure of available or consumed data communication resources expressed in… …   Wikipedia

• Signal generator — A signal generator, also known variously as a test signal generator, function generator, tone generator, arbitrary waveform generator, digital pattern generator or frequency generator is an electronic device that generates repeating or non… …   Wikipedia

• Signal theory — See also Signalling theory, a concept in evolutionary biology Signal theory is the theory of the engineering discipline of signal processing. It provides mathematical approaches for use in a wide range of applications. Fields as far apart as… …   Wikipedia

• Commercial bandwidth — is a term for the regular capacity of the telephone network required for intelligible speech. It was defined as 300 hertz to 3,400 hertz, although the modern PSTN is theoretically capable of transmitting from 0 Hz to 7,000 Hz using ISDN[1].… …   Wikipedia