Refuse-derived fuel (RDF) or solid recovered fuel/ specified recovered fuel (SRF) is a fuel produced by shredding
municipal solid waste(MSW) or steam pressure treating in an autoclave. RDF consists largely of organic components of municipal waste such as plastics and biodegradable waste. RDF processing facilities are normally located near a source of MSW and, while an optional combustion facility is normally close to the processing facility, it may also be located at a remote location. SRF can be distinguished from RDF in the fact that it is produced to reach a standard such as CEN/343ANAS
Non-combustible materials such as
glassand metalsare removed during the post-treatment processing cycle with an air knifeor other mechanical separation processing. The residual material can be sold in its processed form (depending on the process treatment) or it may be compressed into pellets, bricks or logs and used for other purposes either stand-alone or in a recursive recyclingprocess. [Williams, P. (1998) Waste Treatment and Disposal. John Wiley and Sons, Chichester]
Advanced RDF processing methods (pressurised steam treatment in an autoclave) can remove or significantly reduce harmful
pollutantsand heavy metals for use as a material for a variety of manufacturingand related uses. RDF is extracted from MSW using mechanical heat treatment, mechanical biological treatmentor waste autoclaves.
The production of RDF may involve some but not all of the following steps:
*Preliminary liberation "(not required for autoclave treatment)"
*Size screening "(post-treatment step for autoclave treatment)"
*Magnetic separation "(post-treatment for autoclave treatment)"
*Coarse shredding "(not required for autoclave treatment)"
RDF can be used in a variety of ways to produce electricity. It can be used alongside traditional sources of fuel in coal power plants. RDF can be used in the cement kiln industry, where the strict standards of the
Waste Incineration Directiveare met. RDF can also be fed into plasma arc gasificationmodules, pyrolysisplants and where the RDF is capable of being combusted cleanly or in compliance with the Kyoto Protocol, RDF can provide a funding source where unused carbon credits are sold on the open market via a carbon exchange. However, the use of municipal wastecontracts and the bankability of these solutions is still a relatively new concept, thus RDF's financial advantage may be debatable.
Measurement of the biomass fraction of RDF and SRF
The biomass fraction of RDF and SRF has a monetary value under multiple greenhouse gas protocols, such as the European Union Emissions Trading Scheme and the Renewable Obligation Certificate program in the United Kingdom. Biomass is considered to be carbon-neutral since the CO2 liberated from the combustion of biomass is recycled in plants. The combusted biomass fraction of RDF/SRF is used by stationary combustion operators to reduce their overall reported CO2 emissions.
Several methods have been developed by the European CEN 343 working group to determine the biomass fraction of RDF/SRF. The initial two methods developed (CEN/TS 15440) were the manual sorting method and the selective dissolution method. Since each method suffered from limitations in properly characterizing the biomass fraction, an alternative method was developed using the principles of radiocarbon dating. A technical review (CEN/TR 15591:2007) outlining the carbon-14 method was published in 2007. A technical standard of the carbon dating method (CEN/TS 15747:2008) will be published in 2008. In the United States, there is already an equivalent carbon-14 method under the standard method ASTM D6866.
Although carbon-14 dating can determine with excellent precision the biomass fraction of RDF/SRF, it cannot determine directly the biomass calorific value. Determining the calorific value is important for green certificate programs such as the Renewable Obligation Certificate program in the United Kingdom. These programs award certificates based on the energy produced from biomass. Several research papers, including the one commissioned by the Renewable Energy Association in the UK, have been published that demonstrate how the carbon-14 result can be used to calculate the biomass calorific value.
The first full-scale
waste-to-energyfacility in the US was the Arnold O. Chantland Resource Recovery Plant, built in 1975 located in Ames, Iowa. This plant also produces RDF that is sent to local power plants for fuel. [ [http://www.city.ames.ia.us/worksweb/resourcerecovery/default.htm Arnold O. Chantland Resource Recovery Plant] , www.city.ames.ia.us, Retrieved 29.11.06]
The city of
Manchester, in the north west of England, is in the process of awarding a contract for the use of RDF which will be produced by proposed mechanical biological treatmentfacilities as part of a huge PFIcontract. The Greater Manchester Waste Disposal Authorityhas recently announced there is significant market interest in initial bids for the use of RDF which is projected to be produced in tonnages up to 900,000 tonnes per annum. [ [http://www.letsrecycle.com/info/waste_management/news.jsp?story=6274 Healthy interest for Manchester waste-derived fuel contract] , www.letsrecycle.com, Accessed 20.11.06] [ [http://www.letsrecycle.com/info/waste_management/news.jsp?story=6237 Manchester seeks outlets for refuse-derived fuel] , www.letsrecycle.com, Accessed 20.11.06]
Isle of Wight gasification facility
Mechanical biological treatment
Mechanical heat treatment
Wikimedia Foundation. 2010.
Look at other dictionaries:
Refuse Derived Fuel — RDF stellt die heizwertreiche Abfallfraktion dar und zählt zu den Ersatzbrennstoffen. Der Begriff RDF ist rechtlich nicht definiert. Es handelt sich um eine feste und mit gröberer Korngröße versehene Fraktion, die direkt zum Ersatzbrennstoff… … Deutsch Wikipedia
Refuse-Derived Fuel — (RDF) A solid fuel produced by shredding municipal solid waste (MSW). Noncombustible materials such as glass and metals are generally removed prior to making RDF. The residual material is sold as is or compressed into pellets, bricks, or logs.… … Energy terms
Refuse-derived fuel — (RDF) A fuel produced by shredding municipal solid waste (MSW). Noncombustible materials such as glass and metals are generally removed prior to making RDF. The residual material is sold as is or compressed into pellets, bricks, or logs. RDF… … Energy terms
Fuel cell — For other uses, see Fuel cell (disambiguation). Demonstration model of a direct methanol fuel cell. The actual fuel cell stack is the layered cube shape in the center of the image A fuel cell is a device that converts the chemical energy from a… … Wikipedia
environmental works — ▪ civil engineering Introduction infrastructure that provides cities and towns with water supply, waste disposal, and pollution control services. They include extensive networks of reservoirs, pipelines, treatment systems, pumping stations … Universalium
Mechanical biological treatment — Anaerobic digestion and air processing components of Lübeck mechanical biological treatment plant in Germany A mechanical biological treatment system is a type of waste processing facility that combines a sorting facility with a form of… … Wikipedia
Waste-to-energy — (WtE) or energy from waste (EfW) refers to any waste treatment that creates energy in the form of electricity or heat from a waste source. Such technologies reduce or eliminate waste that otherwise would be transferred to a greenhouse gas… … Wikipedia
Incineration — For other forms of waste plant that produces energy, see waste to energy. Incinerator redirects here. For the fictional character, see Incinerator (Transformers). Incinerate redirects here. For the Sonic Youth song, see Incinerate (song). For the … Wikipedia
Gasification — This article is about the process. For the water carbonator, see Gasogene. For the automobile device, see Wood gas generator. Sustainable energy … Wikipedia
топливо, произведенное из отходов — — [http://www.eionet.europa.eu/gemet/alphabetic?langcode=en] EN refuse derived fuel Fuel produced from domestic refuse, after glass and metals have been removed from it, by compressing it to form briquettes used to fuel boilers. (Source:… … Справочник технического переводчика