# Variance

In

probability theory andstatistics , the**variance**of arandom variable ,probability distribution , or sample is one measure ofstatistical dispersion , averaging the squared distance of its possible values from theexpected value (mean). Whereas the mean is a way to describe the location of a distribution, the variance is a way to capture its scale or degree of being spread out. The unit of variance is the square of the unit of the original variable. The positivesquare root of the variance, called thestandard deviation , has the same units as the original variable and can be easier to interpret for this reason.The variance of a real-valued random variable is its second

central moment , and it also happens to be its secondcumulant . Just as some distributions do not have a mean, some do not have a variance. The mean exists whenever the variance exists, but not vice versa.**Definition**If random variable "X" has

expected value (mean) μ = E("X"), then the variance Var("X") of "X" is given by::$operatorname\{Var\}(X)\; =\; operatorname\{E\}\; [\; (\; X\; -\; mu\; )\; ^\; 2\; ]\; .,$

This definition encompasses random variables that are discrete, continuous, or neither. Of all the points about which squared deviations could have been calculated, the mean produces the minimum value for the averaged sum of squared deviations.

The variance of random variable "X" is typically designated as Var("X"), $scriptstylesigma\_X^2$, or simply σ

^{2}.If a distribution does not have an expected value, as is the case for the

Cauchy distribution , it does not have a variance either. Many other distributions for which the expected value does exist do not have a finite variance because the relevant integral diverges. An example is aPareto distribution whosePareto index "k" satisfies nowrap|1 < "k" ≤ 2.**Continuous case**If the random variable "X" is continuous with

probability density function "p"("x"),:$operatorname\{Var\}(X)\; =int\; (x-mu)^2\; ,\; p(x)\; ,\; dx,,$where:$mu\; =\; int\; x\; ,\; p(x)\; ,\; dx,,$and where the integrals are

definite integral s taken for "x" ranging over the range of "X".**Discrete case**If the random variable "X" is discrete with

probability mass function "x"_{1}↦ "p"_{1}, ..., "x"_{"n"}↦ "p"_{"n"},:$sum\_\{i=1\}^n\; p\_i\; (x\_i\; -\; mu)^2,.$

(Note: this variance should be divided by the sum of weights in the case of a discrete

weighted variance .) That is, it is the expected value of the square of the deviation of "X" from its own mean. In plain language, it can be expressed as "The average of the square of the distance of each data point from the mean". It is thus the "mean squared deviation".**Examples****Exponential distribution**The

exponential distribution with parameter λ is a continuous distribution whose support is the semi-infinite interval [0,∞). Itsprobability density function is given by::$f(x)\; =\; lambda\; e^\{-lambda\; x\},,$

and it has expected value μ = λ

^{−1}. Therefore the variance is equal to::$int\_0^infty\; f(x)\; (x\; -\; mu)^2,dx\; =\; int\_0^infty\; lambda\; e^\{-lambda\; x\}\; (x\; -\; lambda^\{-1\})^2,dx\; =\; lambda^\{-2\}.,$

So for an exponentially distributed random variable σ

^{2}= μ^{2}.**Fair die**A six-sided

fair die can be modelled with a discrete random variable with outcomes 1 through 6, each with equal probability^{1}/_{6}. The expected value is (1+2+3+4+5+6)/6 = 3.5. Therefore the variance can be computed to be::$sum\_\{i=1\}^6\; frac\{1\}\{6\}\; (i\; -\; 3.5)^2\; =\; frac\{1\}\{6\}left((-2.5)^2\{+\}(-1.5)^2\{+\}(-0.5)^2\{+\}0.5^2\{+\}1.5^2\{+\}2.5^2\; ight)\; =\; frac\{1\}\{6\}\; cdot\; 17.50\; approx\; 2.92,.$

**Properties**Variance is non-negative because the squares are positive or zero. The variance of a constant random variable is zero, and the variance of a variable in a

data set is 0 if and only if all entries have the same value.Variance is

invariant with respect to changes in alocation parameter . That is, if a constant is added to all values of the variable, the variance is unchanged. If all values are scaled by a constant, the variance is scaled by the square of that constant. These two properties can be expressed in the following formula::$operatorname\{Var\}(aX+b)=a^2operatorname\{Var\}(X).$

The variance of a finite

**sum**of uncorrelated random variables is equal to the sum of their variances.# Suppose that the observations can be partitioned into

**subgroups**according to some second variable. Then the variance of the total group is equal to the mean of the variances of the subgroups plus the variance of the means of the subgroups. This property is known asvariance decomposition or thelaw of total variance and plays an important role in theanalysis of variance . For example, suppose that a group consists of a subgroup of men and an equally large subgroup of women. Suppose that the men have a mean body length of 180 and that the variance of their lengths is 100. Suppose that the women have a mean length of 160 and that the variance of their lengths is 50. Then the mean of the variances is (100 + 50) / 2 = 75; the variance of the means is the variance of 180, 160 which is 100. Then, for the total group of men and women combined, the variance of the body lengths will be 75 + 100 = 175. Note that this uses N for the denominator instead of N - 1.In a more general case, if the subgroups have unequal sizes, then they must be weighted proportionally to their size in the computations of the means and variances. The formula is also valid with more than two groups, and even if the grouping variable is continuous. [

*http://www.groupsrv.com/science/post-1990611.html*]This formula implies that the variance of the total group cannot be smaller than the mean of the variances of the subgroups. Note, however, that the total variance is not necessarily larger than the variances of the subgroups. In the above example, when the subgroups are analyzed separately, the variance is influenced only by the man-man differences and the woman-woman differences. If the two groups are combined, however, then the men-women differences enter into the variance also.

# Many computational formulas for the variance are based on this equality:**The variance is equal to the mean of the squares minus the square of the mean.**For example, if we consider the numbers 1, 2, 3, 4 then the mean of the squares is (1 × 1 + 2 × 2 + 3 × 3 + 4 × 4) / 4 = 7.5. The mean is 2.5, so the square of the mean is 6.25. Therefore the variance is 7.5 − 6.25 = 1.25, which is indeed the same result obtained earlier with the definition formulas. Many pocket calculators use an algorithm that is based on this formula and that allows them to compute the variance while the data are entered, without storing all values in memory. The algorithm is to adjust only three variables when a new data value is entered: The number of data entered so far ("n"), the sum of the values so far ("S"), and the sum of the squared values so far ("SS"). For example, if the data are 1, 2, 3, 4, then after entering the first value, the algorithm would have "n" = 1, "S" = 1 and "SS" = 1. After entering the second value (2), it would have "n" = 2, "S" = 3 and "SS" = 5. When all data are entered, it would have "n" = 4, "S" = 10 and "SS" = 30. Next, the mean is computed as "M" = "S" / "n", and finally the variance is computed as "SS" / "n" − "M" × "M". In this example the outcome would be 30 / 4 - 2.5 × 2.5 = 7.5 − 6.25 = 1.25. If the unbiased sample estimate is to be computed, the outcome will be multiplied by "n" / ("n" − 1), which yields 1.667 in this example.**Properties, formal****Variance of the sum of uncorrelated variables**One reason for the use of the variance in preference to other measures of dispersion is that the variance of the sum (or the difference) of

uncorrelated random variables is the sum of their variances::$operatorname\{Var\}Big(sum\_\{i=1\}^n\; X\_iBig)\; =\; sum\_\{i=1\}^n\; operatorname\{Var\}(X\_i).$

This statement is often made with the stronger condition that the variables are independent, but uncorrelatedness suffices. So if the variables have the same variance σ

^{2}, then, since division by "n" is a linear transformation, this formula immediately implies that the variance of their mean is:$operatorname\{Var\}(overline\{X\})\; =\; operatorname\{Var\}left(frac\{1\}\{n\}sum\_\{i=1\}^n\; X\_i\; ight)\; =\; frac\; \{1\}\{n^2\}\; n\; sigma^2\; =\; frac\; \{sigma^2\}\; \{n\}.$

That is, the variance of the mean decreases with "n". This fact is used in the definition of the standard error of the sample mean, which is used in the

central limit theorem .**Variance of the sum of correlated variables**In general, if the variables are

correlated , then the variance of their sum is the sum of theircovariance s::$operatorname\{Var\}left(sum\_\{i=1\}^n\; X\_i\; ight)\; =\; sum\_\{i=1\}^n\; sum\_\{j=1\}^n\; operatorname\{Cov\}(X\_i,\; X\_j).$

(Note: This by definition includes the variance of each variable, since Cov("X","X")=Var("X").)

Here Cov is the covariance, which is zero for independent random variables (if it exists). The formula states that the variance of a sum is equal to the sum of all elements in the covariance matrix of the components. This formula is used in the theory of

Cronbach's alpha inclassical test theory .So if the variables have equal variance σ

^{2}and the average correlation of distinct variables is ρ, then the variance of their mean is:$operatorname\{Var\}(overline\{X\})\; =\; frac\; \{sigma^2\}\; \{n\}\; +\; frac\; \{n-1\}\; \{n\}\; ho\; sigma^2.$

This implies that the variance of the mean increases with the average of the correlations. Moreover, if the variables have unit variance, for example if they are standardized, then this simplifies to

:$operatorname\{Var\}(overline\{X\})\; =\; frac\; \{1\}\; \{n\}\; +\; frac\; \{n-1\}\; \{n\}\; ho.$

This formula is used in the

Spearman-Brown prediction formula of classical test theory. This converges to ρ if "n" goes to infinity, provided that the average correlation remains constant or converges too. So for the variance of the mean of standardized variables with equal correlations or converging average correlation we have:$lim\_\{n\; o\; infty\}\; operatorname\{Var\}(overline\{X\})\; =\; ho.$

Therefore, the variance of the mean of a large number of standardized variables is approximately equal to their average correlation. This makes clear that the sample mean of correlated variables does generally not converge to the population mean, even though the

Law of large numbers states that the sample mean will converge for independent variables.**Variance of a weighted sum of variables**Properties 6 and 8, along with this property from the

covariance page: Cov("aX", "bY") = "ab" Cov("X", "Y") jointly imply that:$operatorname\{Var\}(aX+bY)\; =a^2\; operatorname\{Var\}(X)\; +\; b^2\; operatorname\{Var\}(Y)\; +\; 2ab,\; operatorname\{Cov\}(X,\; Y).$

This implies that in a weighted sum of variables, the variable with the largest weight will have a disproportionally large weight in the variance of the total. For example, if "X" and "Y" are uncorrelated and the weight of "X" is two times the weight of "Y", then the weight of the variance of "X" will be four times the weight of the variance of "Y".

**Decomposition of variance**The general formula for variance decomposition or the

law of total variance is: If "X" and "Y" are two random variables and the variance of "X" exists, then:$operatorname\{Var\}(X)\; =\; operatorname\{Var\}(operatorname\{E\}(X|Y))+\; operatorname\{E\}(operatorname\{Var\}(X|Y)).$

Here, E("X"|"Y") is the

conditional expectation of "X" given "Y", and Var("X"|"Y") is the conditional variance of "X" given "Y". (A more intuitive explanation is that given a particular value of "Y", then "X" follows a distribution with mean E("X"|"Y") and variance Var("X"|"Y"). The above formula tells how to find Var("X") based on the distributions of these two quantities when "Y" is allowed to vary.) This formula is often applied inanalysis of variance , where the corresponding formula is:$SS\_\{mbox\{Total\; =\; SS\_\{mbox\{Between\; +\; SS\_\{mbox\{Within.$

It is also used in

linear regression analysis, where the corresponding formula is:$SS\_\{mbox\{Total\; =\; SS\_\{mbox\{Regression\; +\; SS\_\{mbox\{Residual.$

This can also be derived from the additivity of variances (property 8), since the total (observed) score is the sum of the predicted score and the error score, where the latter two are uncorrelated.

**Computational formula for variance**The

**computational formula for the variance**follows in a straightforward manner from the linearity of expected values and the above definition::$\{\}operatorname\{Var\}(X)=\; operatorname\{E\}(X^2\; -\; 2,X,operatorname\{E\}(X)\; +\; (operatorname\{E\}(X))^2),$

:$\{\}=operatorname\{E\}(X^2)\; -\; 2(operatorname\{E\}(X))^2\; +\; (operatorname\{E\}(X))^2,$

:$\{\}=operatorname\{E\}(X^2)\; -\; (operatorname\{E\}(X))^2.$

This is often used to calculate the variance in practice, although it suffers from numerical approximation

error if the two components of the equation are similar in magnitude.**Characteristic property**The second moment of a random variable attains the minimum value when taken around the mean of the random variable, i.e. $mathrm\{argmin\}\_m,mathrm\{E\}((X\; -\; m)^2)\; =\; mathrm\{E\}(X),$. Conversely, if a continuous function $varphi$ satisfies $mathrm\{argmin\}\_m,mathrm\{E\}(varphi(X\; -\; m))\; =\; mathrm\{E\}(X),$ for all random variables "X", then it is necessarily of the form $varphi(x)\; =\; a\; x^2\; +\; b$, where nowrap|"a" > 0. This also holds in the multidimensional case. [

*A. Kagan and L. A. Shepp, "Why the variance?", "Statistics and Probability Letters", Volume 38, Number 4, 1998, pp. 329–333. (online [*]*http://dx.doi.org/10.1016/S0167-7152(98)00041-8*] )**Approximating the variance of a function**The

delta method uses second-orderTaylor expansion s to approximate the variance of a function of one or more random variables. For example, the approximate variance of a function of one variable is given by::$operatorname\{Var\}left\; [f(X)\; ight]\; approx\; left(f\text{'}(operatorname\{E\}left\; [X\; ight]\; )\; ight)^2operatorname\{Var\}left\; [X\; ight]$

provided that "f" is twice differentiable and that the mean and variance of "X" are finite.

**Population variance and sample variance**In general, the population variance of a "finite" population of size "N" is given by

:$\{\}sigma^2\; =\; frac\; 1N\; sum\_\{i=1\}^N\; left(x\_i\; -\; overline\{x\}\; ight)^\; 2\; ,$

or if the population is an

abstract population with probability distribution Pr: :$\{\}sigma^2\; =\; sum\_\{i=1\}^N\; left(x\_i\; -\; overline\{x\}\; ight)^\; 2\; ,\; Pr(x\_i),$where $overline\{x\}$ is the population mean. This is merely a special case of the general definition of variance introduced above, but restricted to finite populations.

In many practical situations, the true variance of a population is not known "a priori" and must be computed somehow. When dealing with infinite populations, this is generally impossible.

A common method is estimating the variance of large (finite or infinite) populations from a sample. We take a sample $(y\_1,dots,y\_n)$ of "n" values from the population, and estimate the variance on the basis of this sample. There are several good estimators. Two of them are well known:

:$s\_n^2\; =\; frac\; 1n\; sum\_\{i=1\}^n\; left(y\_i\; -\; overline\{y\}\; ight)^\; 2\; =\; left(frac\{1\}\{n\}\; sum\_\{i=1\}^\{n\}y\_i^2\; ight)\; -\; overline\{y\}^2,$and:$s^2\; =\; frac\{1\}\{n-1\}\; sum\_\{i=1\}^nleft(y\_i\; -\; overline\{y\}\; ight)^\; 2\; =\; frac\{1\}\{n-1\}sum\_\{i=1\}^n\; y\_i^2\; -\; frac\{n\}\{n-1\}\; overline\{y\}^2,$

Both are referred to as

**"sample variance**". Most advanced electronic calculators can calculate both "s"_{n}^{2}and "s"^{2}at the press of a button, in which case that button is usually labeled σ^{2}or σ_{n}^{2}for "s"_{n}^{2}and σ_{n-1}^{2}for "s"^{2}.The two estimators only differ slightly as we see, and for larger values of the

sample size "n" the difference is negligible. The second one is anunbiased estimator of the population variance, meaning that its expected value $E\; [s^2]$ is equal to the true variance of the sampled random variable. The first one may be seen as the variance of the sample considered as a population.:$\{\}operatorname\{E\}(s^2)\; =\; operatorname\{E\}(frac\; \{sum(\; X\; -\; mu\; )\; ^\; 2\}\{n-1\})$:$\{\}=\; frac\{1\}\{n-1\}\; operatorname\{E\}(sum(\; X^2\; -2X\; mu\; +\; mu^2))$:$\{\}=\; frac\{1\}\{n-1\}\; sum(\; operatorname\{E\}(X^2)\; -operatorname\{E\}(2X\; mu)\; +\; operatorname\{E\}(mu^2))$:$\{\}=\; frac\{1\}\{n-1\}(\; noperatorname\{E\}(X^2)\; -2noperatorname\{E\}(mu^2)\; +\; noperatorname\{E\}(mu^2))$:$\{\}=\; frac\{n\}\{n-1\}(\; s\_n^2\; +\; mu^2\; -operatorname\{E\}(mu^2))$:$\{\}=\; frac\{n\}\{n-1\}(\; s\_n^2\; +\; mu^2\; -operatorname\{Var\}(mu)-operatorname\{E\}(mu)^2)$:$\{\}=\; frac\{n\}\{n-1\}(\; s\_n^2\; -frac\{1\}\{n^2\}operatorname\{Var\}(sum\; X))$:$\{\}=\; frac\{n\}\{n-1\}(\; s\_n^2\; -frac\{1\}\{n^2\}ns\_n^2)$:$\{\}=s\_n^2$Common sense would suggest to apply the population formula to the sample as well. The reason that it is biased is that the sample mean is generally somewhat closer to the observations in the sample than the population mean is to these observations. This is so because the sample mean is by definition in the middle of the sample, while the population mean may even lie outside the sample. So the deviations to the sample mean will often be smaller than the deviations to the population mean, and so, if the same formula is applied to both, then this variance estimate will on average be somewhat smaller in the sample than in the population.

One common source of confusion is that the term "sample variance" may refer to either the unbiased estimator $sigma^2$ of the population variance, or to the variance $s^2$ of the sample viewed as a finite population. Both can be used to estimate the true population variance. Apart from theoretical considerations, it doesn't really matter which one is used, as for small sample sizes both are inaccurate and for large values of "n" they are practically the same. Naively computing the variance by dividing by "n" instead of "n"-1 systematically underestimates the population variance. Moreover, in practical applications most people report the standard deviation rather than the sample variance, and the standard deviation that is obtained from the unbiased "n"-1 version of the sample variance has a slight negative bias (though for normally distributed samples a theoretically interesting but rarely used slight correction exists to eliminate this bias). Nevertheless, in applied statistics it is a convention to use the "n"-1 version if the variance or the standard deviation is computed from a sample.

In practice, for large $n$, the distinction is often a minor one. In the course of statistical measurements, sample sizes so small as to warrant the use of the unbiased variancevirtually never occur. In this context Press et al. [

*Press, W. H., Teukolsky, S. A., Vetterling, W. T. & Flannery, B. P. (1986) "". Cambridge: Cambridge University Press. ( [*] commented that "if the difference between "n" and "n"−1 ever matters to you, then you are probably up to no good anyway - e.g., trying to substantiate a questionable hypothesis with marginal data."*http://nr.com/ online*] )**Distribution of the sample variance**Being a function of

random variable s, the sample variance is itself a random variable, and it is natural to study its distribution. In the case that $y\_i$ are independent observations from anormal distribution ,Cochran's theorem shows that $s^2$ follows a scaledchi-square distribution ::$(n-1)frac\{s^2\}\{sigma^2\}simchi^2\_\{n-1\}.$

As a direct consequence, it follows that $operatorname\{E\}(s^2)=sigma^2.$

However, even in the absence of the Normal assumption, it is still possible to prove that $s^2$ is unbiased for $sigma^2$.

**Generalizations**If $X$ is a vector-valued random variable, with values in $mathbb\{R\}^n$, and thought of as a column vector, then the natural generalization of variance is $operatorname\{E\}((X\; -\; mu)(X\; -\; mu)^operatorname\{T\})$, where $mu\; =\; operatorname\{E\}(X)$ and $X^operatorname\{T\}$ is the transpose of $X$, and so is a row vector. This variance is a positive semi-definite square matrix, commonly referred to as the

covariance matrix .If $X$ is a complex-valued random variable, with values in $mathbb\{C\}$, then its variance is $operatorname\{E\}((X\; -\; mu)(X\; -\; mu)^*)$, where $X^*$ is the

complex conjugate of $X$. This variance is also a positive semi-definite square matrix.If one's (real) random variables are defined on an n-dimensional continuum

**x**, thecross-covariance of variables A [**x**] and B [**x**] as a function of n-dimensional vector displacement (or lag)**Δx**may be defined as σ_{AB}[**Δx**] ≡ 〈(A [**x**+**Δx**] -μ_{A})(B [**x**] -μ_{B})〉_{x}. Here the population (as distinct from sample) average over**x**is denoted by angle brackets 〈 〉_{x}or the Greek letter μ.This quantity, called a second-moment [

*http://knowledgetoday.org/wiki/index.php/Correlation correlation measure*] because it's a generalization of the second-moment statistic "variance", is sometimes put into dimensionless form by normalizing with the population standard deviations of A and B (e.g. σ_{A}≡Sqrt [σ_{AA}[0] ). This results in acorrelation coefficient ρ_{AB}[**Δx**] ≡ σ_{AB}[**Δx**] /(σ_{A}σ_{B}) that takes on values between plus and minus one. When A is the same as B, the foregoing expressions yield values forautocovariance , a quantity also known inscattering theory as the pair-correlation (or Patterson) function.If one defines "sample bias coefficient" ρ as an average of the

autocorrelation -coefficient ρ_{AA}[**Δx**] over all point pairs in a set of M sample points [*P. Fraundorf (1980) "Microcharacterization of interplanetary dust collected in the earth's stratosphere" (Ph.D. Dissertation in Physics, Washington University, Saint Louis MO), [*] , an unbiased estimate for "expected error in the mean" of A is the square root of: sample variance (taken as a population) times (1+(M-1)ρ)/((M-1)(1-ρ)). When ρ is much greater than 1/(M-1), this reduces to the square root of: sample variance (taken as a population) times ρ/(1-ρ). When |ρ| is much less than 1/(M-1) this yields the more familiar expression for standard error, namely the square root of: sample variance (taken as a population) over (M-1).*http://arxiv.org/abs/cond-mat/0403013 Appendix E*]**History**The term "variance" was first introduced by

Ronald Fisher in his 1918 paper "The Correlation Between Relatives on the Supposition of Mendelian Inheritance " [*Ronald Fisher (1918) [*] :*http://www.library.adelaide.edu.au/digitised/fisher/9.pdf The correlation between relatives on the supposition of Mendelian Inheritance*]The great body of available statistics show us that the deviations of a human measurement from its mean follow very closely the Normal Law of Errors, and, therefore, that the variability may be uniformly measured by the

standard deviation corresponding to thesquare root of themean square error . When there are two independent causes of variability capable of producing in an otherwise uniform population distributions with standard deviations $heta\_1$ and $heta\_2$, it is found that the distribution, when both causes act together, has a standard deviation $sqrt\{\; heta\_1^2\; +\; heta\_2^2\}$. It is therefore desirable in analysing the causes of variability to deal with the square of the standard deviation as the measure of variability. We shall term this quantity the Variance...**Moment of inertia**The variance of a probability distribution is analogous to the

moment of inertia inclassical mechanics of a corresponding mass distribution along a line, with respect to rotation about its center of mass. It is because of this analogy that such things as the variance are called "moments" ofprobability distribution s. The covariance matrix is related to themoment of inertia tensor for multivariate distributions. The moment of inertia of a cloud of "n" points with a covariance matrix of $Sigma$ is given by :$I=n\; (mathbf\{1\}\_\{3\; imes\; 3\}\; operatorname\{tr\}(Sigma)\; -\; Sigma)$.This difference between moment of inertia in physics and in statistics is clear for points that are gathered along a line. Suppose many points are close to the "x" and distributed along it. The covariance matrix might look like:$Sigma=egin\{bmatrix\}10\; 0\; 0\backslash 0\; 0.1\; 0\; \backslash \; 0\; 0\; 0.1end\{bmatrix\}$.That is, there is the most variance in the "x" direction. However, physicists would consider this to have a low moment "about" the "x" axis so the moment-of-inertia tensor is:$I=negin\{bmatrix\}0.2\; 0\; 0\backslash 0\; 10.1\; 0\; \backslash \; 0\; 0\; 10.1end\{bmatrix\}$.**See also**

*Sample mean and covariance

*Estimation of covariance matrices

*Algorithms for calculating variance

*an inequality on location and scale parameters

*kurtosis

*Qualitative variation

*skewness

*semivariance

*true variance

*explained variance andunexplained variance

*Mean absolute error

*Weighted variance

*Chebyshev's inequality **References****External links*** [

*http://www.stats4students.com/Essentials/Measures-Of-Spread/Overview_3.php A Guide to Understanding & Calculating Variance*]

* [*http://www.library.adelaide.edu.au/digitised/fisher/9.pdf Fisher's original paper*] (pdf format)

* [*http://www.celiagreen.com/charlesmccreery/statistics/anova.pdf A tutorial on Analysis of Variance devised for first-year Oxford University students*]

*Wikimedia Foundation.
2010.*

**Synonyms**:

### Look at other dictionaries:

**variance**— [ varjɑ̃s ] n. f. • 1904; de variant, p. prés. de varier, d apr. invariant, covariant 1 ♦ Sc. Nombre de conditions définissant un système physique ou chimique et que l on peut faire varier arbitrairement sans détruire l état d équilibre du… … Encyclopédie Universelle**variance**— var·i·ance / ver ē əns/ n 1: a disagreement between two documents or positions; esp: a disagreement between allegations (as in an indictment or complaint) and proof offered at trial that warrants an appropriate remedy (as a directed verdict or an … Law dictionary**Variance**— Va ri*ance, n. [L. variantia.] [1913 Webster] 1. The quality or state of being variant; change of condition; variation. [1913 Webster] 2. Difference that produce dispute or controversy; disagreement; dissension; discord; dispute; quarrel. [1913… … The Collaborative International Dictionary of English**variance**— The phrase at variance should be followed by with, not from: • The pace at which strategy was being implemented was at variance with the quick decision making this business requires Guardian, 2006 … Modern English usage**variance**— mid 14c., fact of undergoing change, from O.Fr. variance, from L. variantia, from variare to change (see VARY (Cf. vary)). Meaning state of disagreement is recorded from early 15c. The U.S. zoning sense of official dispensation from a building… … Etymology dictionary**variance**— ► NOUN 1) (usu. in phrase at variance with) the fact or quality of being different or inconsistent. 2) the state of disagreeing or quarrelling. 3) chiefly Law a discrepancy between two statements or documents … English terms dictionary**variance**— [ver′ē əns, var′ē əns] n. [OFr < L variantia < L varians, prp. of variare, to VARY] 1. the quality, state, or fact of varying or being variant; a changing or tendency to change 2. degree of change or difference; divergence; discrepancy 3.… … English World dictionary**variance**— *discord, contention, dissension, difference, strife, conflict Analogous words: difference, diversity, divergency, disparateness (see corresponding adjectives at DIFFERENT): separation, division, severing, sundering (see corresponding verbs at… … New Dictionary of Synonyms**variance**— [n] difference about face*, argument, change, conflict, contention, deviation, difference of opinion, different strokes*, disaccord, disagreement, discord, discrepancy, dissension, dissent, dissidence, disunity, divergence, diversity, division,… … New thesaurus**Variance**— A measure of dispersion of a set of data points around their mean value. The mathematical expectation of the squared deviations from the mean. The square root of the variance is the standard deviation. The New York Times Financial Glossary * * *… … Financial and business terms