Swing-piston engine

A swing-piston engine is a type of internal combustion engine in which the pistons move in a circular motion inside a ring-shaped "cylinder", moving closer and further from each other to provide compression and expansion. Generally two sets of pistons are used, geared to move in a fixed relationship as they rotate around the cylinder. In some versions the pistons oscillate around a fixed center, as opposed to rotating around the entire engine. The basic concept is very similar to the Wankel engine, the "traditional" rotary, but predates it by some time. It also bears a strong lineage with the free-piston engine. The design has also been referred to as a oscillating piston engine, vibratory engine when the pistons oscillate instead of rotate, [ [http://www.dself.dsl.pipex.com/MUSEUM/POWER/rotaryengines/vibrate.htm Vibratory Steam Engines] ] or toroidal engine based on the shape of the "cylinder".

Otto Lutz

It is unclear whether or not any swing-piston engine has ever reached production, but the closest attempt appears to be the German World War II-era design by Otto Lutz. His design had six pistons in total, three each attached to two disks. The disks were geared to each other to form six chambers between the pistons, such that at any one time one set of three chambers were "close together" while the other set of three was "wide apart", varying between those two extremes as the disks rotated. The timing was arranged such that the chambers reached their "close together" point over the spark plug, and their "wide apart" point over the intake and exhaust ports. This action is similar to the Wankel, the primary difference being that Wankel creates compression and expansion via the shaping of the engine and rotor, as opposed to the relative motion of the pistons.

Lutz's engine was being designed as an experimental gas generator for a new type of aircraft engine, one that replaced a traditional centrifugal or axial compressor with his swing-piston design. Ultimately the exhaust would be used to drive a turbine, that power being used to drive a propeller to produce a turboprop engine. For this role the exhaust gas was too hot to be used effectively in a turbine, given the available materials, so the design added a second "exhaust port" that vented cold pressurized air into the hot exhaust. During this stage the compression of the cold air was not used to later produce power. This is not a strict requirement, for direct power use (as opposed to driving a turbine) this "third area" of the engine can simply be left open to avoid losing power to compression that will not be used.

The initial test engines had some minor problems, notably with sealing, but these were worked through and the engines were under test during 1944. One particularly nice feature of the engine is that they can be bolted back to back along a common crank shaft to make a larger engine, and with each additional stage the running becomes smoother and the only part that needs to be made larger is the crankshaft. A similar arrangement with a radial engine is generally more difficult to arrange, especially cooling, and ones with inline engine arrangements soon become so long that keeping the crankshaft from vibrating becomes a serious problem (see Chrysler IV-2220 for example).

Each "cylinder" from Lutz's design was 0.70 m in diameter and only about 30 cm in depth, providing 445 hp from 140 kg, an excellent power-to-weight ratio compared even to jet engines of the era. A five-block version was proposed for his turboprop concept, providing 3,450 hp from an engine about 2 m long. While the power-to-weight was good, the "density" of the engine was simply superb.

The overall turboprop looked much more like a jet engine than a piston one. The swing-piston gas generator was located in the middle of a long nacelle, with a five-stage axial compressor in front and a three-stage turbine behind. The compressor was used both to act as a supercharger for the piston engine, as well as provide cold air to cool the turbine. The actual power to the propeller, combining both the pistons and the turbines, was 4,930 hp at 10,000 m altitude, far greater than any German wartime project.

Why all this complexity to produce a new version of an engine, the turboprop, who's primary advantage was simplicity? The main problem with conventional jet engines is that the combustion takes place in an open chamber, which is considerably less efficient than the closed chamber of a a piston engine, where it has constant volume (or close to it). The Otto cycle or Diesel cycle used in piston engines has a much lower specific fuel consumption than the Brayton cycle of a traditional gas turbine engines at low speed. Lutz's design was intended to power very long-range bombers and patrol aircraft, where fuel economy was more important than simplicity and outright performance.

Lutz later patented the design under "Internal-combustion engine", United States Patent 2,606,541. [ [http://patimg1.uspto.gov/.piw?Docid=02606541&homeurl=http%3A%2F%2Fpatft.uspto.gov%2Fnetacgi%2Fnph-Parser%3FSect1%3DPTO2%2526Sect2%3DHITOFF%2526p%3D1%2526u%3D%25252Fnetahtml%25252FPTO%25252Fsearch-bool.html%2526r%3D1%2526f%3DG%2526l%3D50%2526co1%3DAND%2526d%3DPALL%2526s1%3D2606541.PN.%2526OS%3DPN%2F2606541%2526RS%3DPN%2F2606541&PageNum=&Rtype=&SectionNum=&idkey=NONE&Input=View+first+page Internal-combustion engine] ]

The engine described in the aforementioned patent article is a lightweight two-stroke engine intended as an auxiliary engine for pedal bicycles.

Other examples

Lutz's design is not the only way to produce such an engine, BMW experimented with a traditional engine with poppet valves on the combustion chambers, which had been used a number of times previously in experiments. Another approach entirely is to recover some of the heat of the exhaust in a heat exchanger and use that instead of fuel to heat the compressed air, a concept used by General Motors in a series of automobile turbines. Generally, however, improvements in the basic piston engine in "low power" roles have kept any of these advanced designs out of the marketplace.

More recently, starting in the 1990s, a number of inventors have re-introduced the concept as if it were new. Examples include [http://www.angellabsllc.com/ Angel Labs] ' "Massive Yet Tiny" engine, the [http://www.rotoblock.com/ Rotoblock] , the [http://www.roundengine.com/ Roundengine] , the [http://trochilicengines.com/ Trochilic Engine] and designs by Tschudi and Hoose. [ [http://www.greencarcongress.com/2006/04/new_toroidal_in.html Toroidal engines] ]

ee also

* free-piston engine
* opposed piston engine

References

External links

*http://archive.aztrib.com/Repository/getimage.dll?path=EVT/2003/03/24/37/Img/Pc0370800.jpg
*http://www.youtube.com/watch?v=WNh7hBhvDXU


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Cox model engine — Cox Model Engines Cox Fokker DVII Ready To Fly Control Line Model Plane …   Wikipedia

  • Lutz — may refer to:People with the surname Lutz*Adolfo Lutz, Brazilian physician*Alois Lutz, Austrian figure skater, for whom the Lutz jump is named *Al Lutz, American internet journalist *Berta Lutz, Brazilian scientist and feminist *Bob Lutz,… …   Wikipedia

  • Chevrolet Vega — 1972 Chevrolet Vega GT Hatchback Coupe Manufacturer Chevrolet Division of General Motors Also called Vega 2300 …   Wikipedia

  • airplane — /air playn /, n. 1. a heavier than air aircraft kept aloft by the upward thrust exerted by the passing air on its fixed wings and driven by propellers, jet propulsion, etc. 2. any similar heavier than air aircraft, as a glider or helicopter. Also …   Universalium

  • Valve — This article is about the flow control device. For the game developer, see Valve Corporation. For the electronic component, see Vacuum tube. For other uses, see Valve (disambiguation). These water valves are operated by handles. A valve is a… …   Wikipedia

  • Constant speed propeller — Cutaway constant speed propeller hub …   Wikipedia

  • Messerschmitt Me 262 — Me 262 Schwalbe Messerschmitt Me 262A Role …   Wikipedia

  • Lockheed P-2 Neptune — P 2 (P2V) Neptune SP 2H of VP 7 over the Atlantic in the mid 1960s. Role Maritime Patrol and Anti Submarine Warfare …   Wikipedia

  • Junkers Ju 87 — infobox Aircraft name = Junkers Ju 87 type = Dive bomber manufacturer = Junkers caption = A Ju 87 B 2 designer = Hermann Pohlmann first flight = 17 September 1935 introduction = avyear|1936 retired = avyear|1945 ( Luftwaffe ) number built =… …   Wikipedia

  • Douglas DC-6 — DC 6 Douglas DC 6B of Swiss airline Balair in 1976 Role …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.