- Work (thermodynamics)
thermodynamics, work is the quantity of energytransferred from one system to another without an accompanying transfer of entropy. It is a generalization of the concept of mechanical workin mechanics. In the SI system of measurement, work is measured in joules (symbol: J). The rate at which work is performed is power.
Work, i.e. "weight "lifted" through a height", was originally defined in 1824 by Sadi Carnot in his famous paper "Reflections on the Motive Power of Fire". Specifically, according to Carnot:
In 1845, the English physicist
James Joulewrote a paper "On the mechanical equivalent of heat" for the British Association meeting in Cambridge[ Joule, J.P. (1845) [http://dbhs.wvusd.k12.ca.us/webdocs/Chem-History/Joule-Heat-1845.html "On the Mechanical Equivalent of Heat"] , "Brit. Assoc. Rep., trans. Chemical Sect", p.31, which was read before the British Association at Cambridge, June] . In this work, he reported his best-known experiment, in which the work released through the action of a "weight "falling" through a height" was used to turn a paddle-wheel in an insulated barrel of water.
In this experiment, the friction and agitation of the paddle-wheel on the body of water caused
heatto be generated which, in turn, increased the temperatureof water. Both the temperature change ∆T of the water and the height of the fall ∆h of the weight mg were recorded. Using these values, Joule was able to determine the mechanical equivalent of heat. Joule estimated a mechanical equivalent of heat to be 819 ft•lbf/Btu (4.41 J/cal). The modern day definitions of heat, work, temperature, and energyall have connection to this experiment.
According to the "
First Law of Thermodynamics", it is useful to separate changes to the internal energy of a thermodynamic system into two sorts of energy transfers. Work refers to forms of energy transfer which can be accounted for in terms of changes in the "macroscopic" physical variables of the system, for example energy which goes into expanding the volume of a system against an external pressure, by driving a piston-head out of a cylinder against an external force. This is in contrast to heatenergy, which is carried into or out of the system in the form of transfers in the "microscopic" thermal motions of particles.
The concept of thermodynamic work is slightly more general than that of mechanical work because it includes other types of energy transfers as well. The electrical work required to move a charge against an external electrical field can be measured, as can the work required to move heat against a temperature gradient. An extremely important fact to understand is that thermodynamic work need not have any mechanical component to be considered such.
According to the First Law of Thermodynamics, any net increase in the internal energy "U" of a thermodynamic system must be fully accounted for, in terms of heat "δQ" entering the system minus work "δW" done "by" the system:
The letter "d" indicates that internal energy "U" is a property of the state of the system, so changes in the internal energy are
exact differentials; they depend only on the original state and the final state, and not upon the path taken. In contrast, the Greek delta's ("δ"‘s) in this equation reflect the fact that the heat transfer and the work transfer are "not" properties of the final state of the system. Given only the initial state and the final state of the system, one can only say what the total change in internal energy was, not how much of the energy went out as heat, and how much as work. This can be summarized by saying that heat and work are not state functions of the system.
Chemical thermodynamicsstudies "PV work", which occurs when the volume of a fluid changes. PV work is represented by the following differential equation:
* "W" = work done on the system
* "P" = external pressure
* "V" = volume
Like all work functions, PV work is path-dependent. This means that the differential is an
inexact differential; to be more rigorous, it should be written đW (with a line through the d).
In other words, from a mathematical point of view, đW is not an exact
one-form. The line-through is merely a flag to warn us there is actually no function ( 0-form) which is the potentialof đW. If there were, indeed, this function , we should be able to just use Stokes Theoremto evaluate this putative function, the potential of đW, at the boundaryof the path, that is, the initial and final points, and therefore the work would be a state function. This impossibility is consistent with the fact that it does not make sense to refer to "the work on a point" in the PV diagram; work presupposes a path.
PV work is often measured in the (non-SI) units of litre-atmospheres, where 1 L·atm = 101.3 J.The mathematical equation for the thermodynamical substance depends on the weight,mass and temperature of the thermodynamical substance.
Free energy and exergy
The amount of useful work which "can" be extracted from a thermodynamic system is discussed in the article "
Second Law of Thermodynamics". Under many practical situations this can be represented by the thermodynamic Availability or Exergyfunction. Two important cases are: in thermodynamic systems where the temperature and volume are held constant, the measure of "useful" work attainable is the Helmholtz free energyfunction; and in systems where the temperature and pressure are held constant, the measure of "useful" work attainable is to the Gibbs free energy.
Wikimedia Foundation. 2010.
Look at other dictionaries:
Work — may refer to: Human labor: Employment House work Labor (economics), measure of the work done by human beings Manual labor, physical work done by people Wage labor, in which a worker sells their labor and an employer buys it Work (project… … Wikipedia
Work (physics) — Classical mechanics Newton s Second Law History of classical mechanics … Wikipedia
thermodynamics — thermodynamicist, n. /therr moh duy nam iks/, n. (used with a sing. v.) the science concerned with the relations between heat and mechanical energy or work, and the conversion of one into the other: modern thermodynamics deals with the properties … Universalium
Thermodynamics — Annotated color version of the original 1824 Carnot heat engine showing the hot body (boiler), working body (system, steam), and cold body (water), the letters labeled according to the stopping points in Carnot cycle … Wikipedia
Thermodynamics — A study of the transformation of energy from one form to another, and its practical application. U.S. Dept. of Energy, Energy Information Administration s Energy Glossary see Law(s) of Thermodynamics. *** A study of the transformation… … Energy terms
Work output — In reference to physics, Work Output is the work done by a Simple Machine or any type of engine model. In other words, it is the energy output, which for simple machines is always less than the energy input, even though the forces might be… … Wikipedia
thermodynamics — /ˌθɜmoʊdaɪˈnæmɪks / (say .thermohduy namiks) noun 1. the science concerned with the relations between heat and mechanical energy or work, and the conversion of one into the other. 2. See law of thermodynamics. –thermodynamic, thermodynamical,… … Australian English dictionary
thermodynamics — 1. The branch of physicochemical science concerned with heat and energy and their conversions one into the other involving mechanical work. 2. The study of the flow of heat. [thermo + G. dynamis, force] * * * … Medical dictionary
thermodynamics — ther•mo•dy•nam•ics [[t]ˌθɜr moʊ daɪˈnæm ɪks[/t]] n. (used with a sing. v.) thr the science concerned with the relations between heat and mechanical energy or work, and the conversion of one into the other • Etymology: 1850–55 … From formal English to slang
Non-equilibrium thermodynamics — Thermodynamics … Wikipedia