# Aspect ratio (wing)

In aerodynamics, the aspect ratio of a wing is defined as the square of the wing span divided by the wing area.:$AR = \left\{b^2 over S\right\}$where:"b" is the wing span, and:"S" is the wing area.

Informally, a high aspect ratio indicates long, narrow wings, whereas a low aspect ratio indicates short, stubby wings.

Aspect ratio of airplane wings

Aspect ratio and planform are powerful indicators of the general performance of a wing, although the aspect ratio as such is only a secondary indicator. The wingspan is the crucial component of the performance. This is because an airplane derives its lift from a roughly cylindrical tube of air that is affected by the craft as it moves, and the diameter of that cylindrical tube is equal to the wingspan. Thus a large wingspan is working on a "large" cylinder of air, and a small wingspan is working on a "small" cylinder of air. The smaller cylinder of air must be pushed downward by a greater amount in order to produce an equal upward force; the aft-leaning component of this change in velocity is proportional to the "induced drag". Therefore a large downward velocity is proportional to a large induced drag.

The interaction between undisturbed air outside the cylindrical tube of air, and the downward-moving cylindrical tube of air occurs at the wing's tips, and can be seen as wingtip vortices.

This property of wingspan is illustrated in the formula used to calculate the equivalent drag factor (Cd times area} used to calculate induced drag:

Cd induced * Swing = (weight/(dynamic pressure * wingspan))^2 * (1/(PI * wing planform efficiency factor))

There are several reasons why "all" aircraft do not have high aspect wings:

* Structural: A long wing has higher bending stress for a given load than a short one, which requires stronger structure to withstand. Also, longer wings have greater deflection for a given load, and in some applications this deflection is undesirable (e.g. if the deflected wing interferes with aileron movement).

* Maneuverability: a high aspect-ratio wing will have a lower roll rate than one of low aspect ratio, because in a high-aspect-ratio wing, an equal amount of wing movement due to aileron deflection (at the aileron) will result in less rolling action on the fuselage due to the greater length between the aileron and the fuselage. A higher aspect ratio wing will also have a higher moment of inertia to overcome. Due to the lower roll rates, high aspect ratio wings are usually not used on fighter aircraft.

* Parasite Drag: While high aspect wings create less induced drag, they have greater parasite drag, (drag due to shape, frontal area, and friction). This is because, for an equal wing "area", the average chord (length in the direction of wind travel over the wing) is smaller. Due to the effects of Reynolds Number, the value of the section-drag coefficient is an inverse logarithmic function of the characteristic length of the surface, which means that, even if two wings of the same area are flying at equal speeds and using equal angles of attack, the section drag coefficient is slightly higher on the wing with the smaller chord. However, this variation is very small when compared to the variation in induced drag with changing wingspan (for example, "Airplane Aerodynamics" by Dommasch/Sherby/Connolly, published by Pitman Publishing in 1961, calculated on page 128 the ratio of a specific airfoil contour (NACA 23012) at typical lift coefficients: Section Drag Ratio = (chord ratio)^0.129, which means that a 20 percent increase in chord length would decrease the section drag coefficient by 2.4 percent)
* Practicality: low aspect ratios have a greater useful internal volume, since the maximum thickness is greater, which can be used to house the fuel tanks, retractable landing gear and other systems.

Variable Aspect Ratio

Aircraft which approach or exceed the speed of sound sometimes incorporate variable aspect-ratio wing structures. This is due to the difference in fluid behavior in the subsonic and transonic/supersonic regimes. In subsonic flow, the most significant component of drag is the induced drag, which is a function of the circular tube of air affected by the wing's passage. However, as the flow becomes supersonic, the "shock wave" first generated along the wing's upper surface causes a huge drag on the aircraft, and this drag is proportional to the length of the wing - the longer the wing, the longer the shock wave. Thus a long wing, valuable at low speeds, becomes a detriment at transonic speeds. If the aircraft can stand the extra weight and complexity of a moveable wing, the swing-wing provides a solution to this problem.

Aspect ratio of bird wings

High aspect ratio wings abound in nature. Most birds which have to cover long distances e.g. on migratory routes have a high aspect ratio, and with tapered or elliptical wingtips. This is particularly noticeable on soaring birds such as albatrosses and eagles. By contrast, hawks of the genus "Accipiter" such as the Eurasian Sparrowhawk have low aspect ratio wings (along with long tails) for maneuverability.

ee also

*Planform
*Wetted aspect ratio

Wikimedia Foundation. 2010.

### Look at other dictionaries:

• Wetted aspect ratio (wing) — The wetted aspect ratio is a good indication of the aerodynamic efficiency of an aircraft. It is a better measure than the aspect ratio. It is defined as:: ARwet = {b^2 over Sw} where Sw is the wetted surface of the whole aircraft in contrast to… …   Wikipedia

• Aspect ratio (disambiguation) — Aspect ratio may be described generally or in specific applications. General: *Aspect ratio (General definition, applications, and examples) Graphics: *Image aspect ratio *Pixel aspect ratio Aviation: *Wetted aspect ratio (wing) *Aspect ratio… …   Wikipedia

• Aspect ratio — (A[ e]ronautics) The ratio of the long to the short side of an a[ e]roplane, a[ e]rocurve, or wing. [Webster 1913 Suppl.] …   The Collaborative International Dictionary of English

• Aspect ratio — The aspect ratio of a shape is the ratio of its longer dimension to its shorter dimension. It may be applied to two characteristic dimensions of a three dimensional shape, such as the ratio of the longest and shortest axis, or for symmetrical… …   Wikipedia

• aspect ratio — The ratio of span of the wing to its chord. It also may be expressed as the ratio of the square of the span of the wing to its area. Aspect ratio (A) = span2 /wing area, span/chord, span × chord/chord2 , or wing area/chord2 …   Aviation dictionary

• aspect ratio — [1] The ratio of length to width of rectangular air grille or duct. [2] The relationship in a tire or wheel between the distance from the rim to the tread and the tire s width (i.e., ratio of section height to section width). Thus, in a… …   Dictionary of automotive terms

• effective aspect ratio — That aspect ratio of airfoil of elliptical planform that, for same lift coefficient, has same induced drag coefficient as airfoil, or combination of airfoils in question. Aspect ratio is the ratio of the span of the wing to its chord and also can …   Aviation dictionary

• Wing configuration — For aircraft configurations in general, including fuselage, tail and powerplant configuration, see Aircraft. For rotary winged aircraft types, see Rotorcraft. For direct lift and compound or hybrid types, see Powered lift. Fixed wing aircraft,… …   Wikipedia

• Wing Derringer — NOTOC Infobox Aircraft name=Derringer caption= type=Light twin engined touring monoplane manufacturer=Wing Aircraft designer=John Thorp first flight=1962 introduced= retired= status= primary user= more users= produced= number built=12 variants… …   Wikipedia

• Lift-to-drag ratio — In aerodynamics, the lift to drag ratio, or L/D ratio ( ell over dee in the US, ell dee in the UK), is the amount of lift generated by a wing or vehicle, divided by the drag it creates by moving through the air. A higher or more favorable L/D… …   Wikipedia