Study of geological shear is related to the study of
structural geology, rock microstructureor rock texture and fault mechanics.
Shear is the response of a rock to
deformationusually by compressive stressand forms particular textures. Shear can be homogeneous or non-homogeneous, and may be pure shearor simple shear.
The process of shearing generally occurs within brittle-ductile and
ductilerocks. Within purely brittlerocks, compressive stress results in fracturing and simple faulting.
A "shear zone" or "shear" is a wide zone of distributed shearing in rock. Typically this is a type of fault but it may be difficult to place a distinct fault plane into the shear zone. Shear zones may form zones of much more intense foliation,
deformation, and folding.
Many shear zones host
oredeposits as they are a focus for hydrothermal flow through orogenic belts. They may often show some form of retrograde metamorphism from a peak metamorphic assemblage and are commonly metasomatised.
Shear zones can be only inches wide, or up to several kilometres wide. Often, due to their structural control and presence at the edges of tectonic blocks, shear zones are mappable units and form important discontinuities to separate terranes. As such, many large and long shear zones are named, similar to fault systems.
Mechanisms of shearing
The mechanisms of shearing depend on the pressure and temperature of the rock and on the rate of shear which the rock is subjected to. The response of the rock to these conditions determines how it accommodates the deformation.
Shear zones which occur in more brittle rheological conditions (cooler, less confining pressure) or at high rates of strain, tend to fail by brittle failure; breaking of minerals, which are ground up into a breccia with a "milled" texture.
Shear zones which occur under brittle-ductile conditions can accommodate much deformation by enacting a series of mechanisms which rely less on fracture of the rock and occur within the minerals and the mineral lattices themselves. Shear zones accommodate
compressive stressby movement on foliation planes.
Shearing at ductile conditions may occur by , and "dislocation creep" within minerals, by fracturing of minerals and growth of sub-grain boundaries, as well as by "lattice glide", particularly on platy minerals, especially micas.
Mylonites are essentially ductile shear zones.
Microstructures of shear zones
During the initiation of shearing, a penetrative planar foliation is first formed within the rock mass. This manifests as realignment of textural features, growth and realignment of
micas and growth of new minerals.
The incipient shear foliation typically forms normal to the direction of principal shortening, and is diagnostic of the direction of shortening. In symmetric shortening, objects flatten on this shear foliation much the same way that a round ball of treacle flattens with gravity.
Within assymmetric shear zones, the behavior of an object undergoing shortening is analogous to the ball of treacle being smeared as it flattens, generally into an ellipse. Within shear zones with pronounced displacements a shear foliation may form at a shallow angle to the gross plane of the shear zone. This foliation ideally manifests as a sinusoidal set of foliations formed at a shallow angle to the main shear foliation, and which curve into the main shear foliation. Such rocks are known as L-S tectonites.
If the rock mass begins to undergo large degrees of lateral movement, the strain ellipse lengthens into a cigar shaped volume. At this point shear foliaions begin to break down into a rodding lineation or a stretch lineation. Such rocks are known as L-tectonites.
Ductile shear microstructures
Very distinctive textures form as a consequence of ductile shear. An important group of microstructures observed in ductile shear zones are S-planes, C-planes and C' planes.
*S-planes or "schistosité" planes are generally defined by a planar fabric caused by the alignment of
micas or platy minerals. Define the flattened long-axis of the strain ellipse.
*C-planes or "cisaillement" planes form parallel to the shear zone boundary. The angle between the C and S planes is always acute, and defines the shear sense. Generally, the lower the C-S angle the greater the strain.
*The C' planes, also known as shear bands and secondary shear fabrics, are commonly observed in strongly foliated mylonites especially phyllonites, and form at an angle of about 20 degrees to the S-plane.The sense of shear shown by both S-C and S-C' structures matches that of the shear zone in which they are found.
Transpression regimes are formed during oblique collision of tectonic plates and during non-orthogonal
subduction. Typically a mixture of oblique-slip thrust faults and strike-slip or transform faults are formed. Microstructural evidence of transpressional regimes can be rodding lineations, mylonites, augen-structured gneisses, mica fish and so on.
A typical example of a transpression regime is the Alpine Fault zone of
New Zealand, where the oblique subduction of the Pacific Plateunder the Indo-Australian Plateis converted to oblique strike-slip movement. Here, the orogenic belt attains a trapezoidal shape dominated by oblique splay faults, steeply-dipping recumbent nappes and fault-bend folds.
The Alpine Schist of New Zealand is characterised by heavily crenulated and sheared
phyllite. It s being pushed up at the rate of 8 to 10 mm per year, and the area is prone to large earthquakes with a south block up and west oblique sense of movement.
Transtension regimes are oblique tensional environments. Oblique, normal geologic fault and detachment faults in rift zones are the typical structural manifestations of transtension conditions. Microstructural evidence of transtension includes rodding or stretching lineations, stretched
porphyroblasts, mylonites, etc.
* Sense of shear indicators:
[http://fbe.uwe.ac.uk/public/geocal/SoilMech/shear/shear.htm Diagrams and definitions of shear]
Wikimedia Foundation. 2010.
Look at other dictionaries:
Shear — For similarly pronounced words, see sheer, Shere, or sher. Shear as a noun may refer to:*Bias (textile), in clothing design, fabric may be cut on the shear *Cosmic shear, an effect of distortion of image of distant galaxies due to deflection of… … Wikipedia
shear zones — plural noun (geology) Bands in metamorphic rocks consisting of crushed and brecciated material and many parallel fractures • • • Main Entry: ↑shear … Useful english dictionary
Geology of the Iberian Peninsula — The geology of the Iberian Peninsula consists of the study of the rock formations on the Iberian Peninsula, which includes Spain, Portugal, Andorra, and Gibraltar. The peninsula contains rocks from every age from Ediacaran to Recent, and almost… … Wikipedia
Geology of the Alps — The Alps form a part of a Tertiary orogenic belt of mountain chains, called the Alpide belt, that stretches through southern Europe and Asia from the Atlantic all the way to the Himalayas. This belt of mountain chains was formed during the Alpine … Wikipedia
Geology — Oceanic crustContinental Crust] Geology (from Greek: γη, gê , earth ; and λόγος, logos , speech lit. to talk about the earth) is the science and study of the solid and liquid matter that constitute the Earth. The field of geology encompasses the… … Wikipedia
Geology of Australia — Australia is a continent situated on the Indo Australian Plate.The geology of Australia includes virtually all known rock types and from all geological time periods spanning over 3.8 billion years of the Earth s history. ComponentsAustralia s… … Wikipedia
shear zone — noun : a zone of shear structure or of closely spaced approximately parallel faults that often becomes a channel for underground solutions and the seat of ore deposition * * * Geol. a zone of closely spaced, approximately parallel faults or… … Useful english dictionary
Geology of the Himalaya — [ Fig 1: The earth in the Early Permian. At that time, India is part of Gondwana and bordered to the north by the Cimmerian Superterrane. Paleogeographic reconstructions. By Dèzes (1999), based on Stampfli and Borel (2002) and Patriat and Achache … Wikipedia
Geology of Lizard, Cornwall — The Geology of The Lizard, Cornwall in the United Kingdom has been the subject of much study. It is a fascinating and unique area geologically as it is a rare example of an exposed ophiolite complex. The rocks found in the area are analogous to… … Wikipedia
Geology of the Moon — The geology of the Moon (sometimes called selenology, although the latter term can refer more generally to lunar science ) is quite different from that of the Earth. The Moon lacks a significant atmosphere and any bodies of water, which… … Wikipedia