Electrical load


Electrical load

If an electric circuit has a well-defined output terminal, the circuit connected to this terminal (or its input impedance) is the load. (The term 'load' may also refer to the power consumed by a circuit; that topic is not discussed here.)

Load affects the performance of circuits that output voltages or currents, such as sensors, voltage sources, and amplifiers. A household's power outlets provide an easy example: they are a voltage source, outputting 120 V AC for example (in USA), with the household's appliances collectively making up the load. When a power-hungry appliance switches on, it dramatically reduces the load impedance, causing the output voltage to drop. This drop is easily observed; for instance, turning on a vacuum cleaner dims the lights.

A more technical approach

(Two sidenotes on generality, for advanced readers: This discussion will disregard nonlinearity. It will also use simple resistances, but they can be readily generalized to impedances for AC analysis.)

When discussing the effect of load on a circuit, it is helpful to disregard the circuit's actual design and consider only the Thévenin equivalent. (The Norton equivalent works just as well, but this discussion will use the Thévenin form.) The Thévenin equivalent of a circuit looks like this:

With no load (open-circuited terminals), all of V_S falls across the output; the output voltage is V_S. However, the circuit will behave differently if a load is added. We would like to ignore the details of the load circuit, as we did for the power supply, and represent it as simply as possible. If we use an input resistance to represent the load, the complete circuit looks like this:

Whereas the voltage source by itself was an open circuit, adding the load makes a closed circuit and allows current to flow. This current places a voltage drop across R_S, so the voltage at the output terminal is no longer V_S. The output voltage can be determined by the voltage division rule:

:V_{OUT} = V_S cdot frac{R_{L{R_{L} + R_S}

See also

* Dummy load


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Load management — is the process of balancing the supply of electricity on the network with the electrical load.Electrical energy is a form of Energy that cannot be stored. It can however be traded as a commodity. It must be generated, shipped to the point where… …   Wikipedia

  • Load — may refer to:*Structural load, forces which are applied to a structure *Cargo, Freight, or Lading *The load of a mutual fund (see Mutual fund fees and expenses) *The load of an insurance contract, defined as the percent increase of the expected… …   Wikipedia

  • Electrical generator — In electricity generation, an electrical generator is a device that converts mechanical energy to electrical energy, generally using electromagnetic induction. The reverse conversion of electrical energy into mechanical energy is done by a motor …   Wikipedia

  • Load control — One approach many electrical utilities have taken to ensure the electrical load is less than what can be generated is to exercise some form of load control. In this case, certain applications are identified as “deferrable” to run later in the day …   Wikipedia

  • Load bank — A load bank is a device which develops an electrical load, applies the load to an electrical power source and converts or dissipates the resultant power output of the source. The purpose of a load bank is to accurately mimic the operational or… …   Wikipedia

  • Load profile — In electrical engineering, a load profile is a graph of the variation in the electrical load versus time. A load profile will vary according to customer type (typical examples include residential, commercial and industrial), temperature and… …   Wikipedia

  • Electrical ballast — Choke ballast (inductor) used in older lighting. This example is from a tanning bed. Requires a lamp starter (below) and capacitor …   Wikipedia

  • Load factor (electrical) — In electrical engineering, load factor is the average power divided by the peak power, over a period of time. [cite web last = Fegley first = K. A title = The residential user and the electrical load factor url =… …   Wikipedia

  • Load balancing (electrical power) — (daily peak demand reserve) refers to the use of various techniques by electrical power stations to store excess electrical power during low demand periods for release as demand rises. [cite web url=http://www.electricitystorage.org/technologies.h… …   Wikipedia

  • Electrical wiring — in general refers to insulated conductors used to carry electricity, and associated devices. This article describes general aspects of electrical wiring as used to provide power in buildings and structures, commonly referred to as building wiring …   Wikipedia


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.