A medical ventilator can be defined as any machine designed to mechanically move breatheable air into and out of the lungs, to provide the mechanism of breathing for a patient who is physically unable to breathe, or breathing insufficiently.
While modern ventilators are generally thought of as computerized machines, patients can be ventilated indefinitely with a bag valve mask, a simple hand-operated machine. After Hurricane Katrina, dedicated staff "bagged" patients in New Orleans hospitals for days with simple bag valve masks.
In its simplest form, a modern positive pressure ventilator consists of a compressible air reservoir or turbine, air and oxygen supplies, a set of valves and tubes, and a disposable or reusable "patient circuit". The air reservoir is pneumatically compressed several times a minute to deliver room-air, or in most cases, an air/oxygen mixture to the patient. If a turbine is used, the turbine pushes air through the ventilator, with a flow valve adjusting pressure to meet patient-specific parameters. When overpressure is released, the patient will exhale passively due to the lungs' elasticity, the exhaled air being released usually through a one-way valve within the patient circuit called the patient manifold. The oxygen content of the inspired gas can be set from 21 percent (ambient air) to 100 percent (pure oxygen). Pressure and flow characteristics can be set mechanically or electronically.
Ventilators may also be equipped with monitoring and alarm systems for patient-related parameters (e.g. pressure, volume, and flow) and ventilator function (e.g. air leakage, power failure, mechanical failure), backup batteries, oxygen tanks, and remote control. The pneumatic system is nowadays often replaced by a computer-controlled turbopump.
Modern ventilators are electronically controlled by a small embedded system to allow exact adaptation of pressure and flow characteristics to an individual patient's needs. Fine-tuned ventilator settings also serve to make ventilation more tolerable and comfortable for the patient. In Germany, Canada, and the United States, respiratory therapists are responsible for tuning these settings while biomedical technologists are responsible for the maintenance.
The patient circuit usually consists of a set of three durable, yet lightweight plastic tubes, separated by function (e.g. inhaled air, patient pressure, exhaled air). Determined by the type of ventilation needed, the patient-end of the circuit may be either noninvasive or invasive.
Noninvasive methods, which are adequate for patients who require a ventilator only while sleeping and resting, mainly employ a nasal mask. Invasive methods require intubation, which for long-term ventilator dependence will normally be a tracheotomy cannula, as this is much more comfortable and practical for long-term care than is larynx or nasal intubation.
Because the failure of a mechanical ventilation system may result in death, it is classed as a life-critical system, and precautions must be taken to ensure that mechanical ventilation systems are highly reliable. This includes their power-supply provision.
Mechanical ventilators are therefore carefully designed so that no single point of failure can endanger the patient. They usually have manual backup mechanisms to enable hand-driven respiration in the absence of power. Some systems are also equipped with compressed-gas tanks and backup batteries to provide ventilation in case of power failure or defective gas supplies, and methods to operate or call for help if their mechanisms or software fail.]]
The early history of mechanical ventilation begins with various versions of what was eventually called the iron lung, a form of noninvasive negative pressure ventilator widely used during the polio epidemics of the 20th century after the introduction of the "Drinker respirator" in 1928, and the subsequent improvements introduced by John Haven Emerson in 1931. Other forms of noninvasive ventilators, also used widely for polio patients, include Biphasic Cuirass Ventilation, the rocking bed, and rather primitive positive pressure machines.
In 1949, John Haven Emerson developed a mechanical assister for anesthesia with the cooperation of the anesthesia department at Harvard University. Mechanical ventilators began to be used increasingly in anesthesia and intensive care during the 1950s. Their development was stimulated both by the need to treat polio patients and the increasing use of muscle relaxants during anesthesia. Relaxant drugs paralyze the patient and improve operating conditions for the surgeon, but also paralyze the respiratory muscles
In the United Kingdom, the East Radcliffe and Beaver models were early examples, the later using an automotive wiper motor to drive the bellows used to inflate the lungs. Electric motors were, however, a problem in the operating theatres of that time, as their use caused an explosion hazard in the presence of flammable anesthetics such as ether and cyclopropane. In 1952, Roger Manley of the Westminster Hospital, London, developed a ventilator which was entirely gas driven, and became the most popular model used in Europe. It was an elegant design, and became a great favourite with European anesthetists for four decades, prior to the introduction of models controlled by electronics. It was independent of electrical power, and caused no explosion hazard. The original Mark I unit was developed to become the Manley Mark II in collaboration with the Blease company, who manufactured many thousands of these units. Its principle of operation was very simple, an incoming gas flow was used to lift a weighted bellows unit, which fell intermittently under gravity, forcing breathing gases into the patient's lungs. The inflation pressure could be varied by sliding the movable weight on top of the bellows. The volume of gas delivered was adjustable using a curved slider, which restricted bellows excursion. Residual pressure after the completion of expiration was also configurable, using a small weighted arm visible to the lower right of the front panel. This was a robust unit and its availability encouraged the introduction of positive pressure ventilation techniques into mainstream European anesthetic practice.
The 1955 release of Forrest Bird's "Bird Universal Medical Respirator" in the United States, changed the way mechanical ventilation was performed with the small green box becoming a familiar piece of medical equipment. The unit was sold as the Bird Mark 7 Respirator and informally called the "Bird". It was a pneumatic device and therefore required no electrical power source to operate.
Intensive care environments around the world revolutionalized in 1971 by the introduction of the first SERVO 900 ventilator (Elema-Schönander). It was a small, silent and effective electronic ventilator, with the famous SERVO feedback system controlling what had been set and regulating delivery. For the first time, the machine could deliver the set volume in volume control ventilation.
Ventilators used under increased pressure (hyperbaric) require special precautions and few ventilators can operate under these conditions. In 1979, Sechrist Industries introduced their Model 500A ventilator which was specifically designed for use with hyperbaric chambers.
In 1991 the SERVO 300 ventilator series was introduced. The platform of the SERVO 300 series enabled treatment of all patient categories, from adult to neonate, with one single ventilator. The SERVO 300 series provided a completely new and unique gas delivery system, with rapid flow-triggering response.
A modular concept, meaning that the hospital has one ventilator model throughout the ICU department instead of a fleet with different models and brands for the different user needs, was introduced with SERVO-i in 2001. With this modular concept the ICU departments could choose the modes and options, software and hardware needed for a particular patient category.
Biphasic Cuirass Ventilation
Biphasic Cuirass Ventilation (BCV) is a method of ventilation which requires the patient to wear an upper body shell or cuirass, so named after the body armor worn by medieval soldiers. The ventilation is biphasic because the cuirass is attached to a pump which actively controls both the inspiratory and expiratory phases of the respiratory cycle. This method has also been described as 'Negative Pressure Ventilation' (NPV), 'External Chest Wall Oscillation' (ECWO), 'External Chest Wall Compression' (ECWC) and 'External High Frequency Oscillation' (EHFO). BCV may be considered a refinement of the iron lung ventilator. Biphasic Cuirass Ventilation was developed by the late Dr Zamir Hayek, a pioneer in the field of assisted ventilation. Some of Dr Hayek's previous inventions include the Hayek Oscillator, an early form of the technology.
- ^ a b Geddes LA (2007). "The history of artificial respiration". IEEE Engineering in Medicine and Biology Magazine : the Quarterly Magazine of the Engineering in Medicine & Biology Society 26 (6): 38–41. doi:10.1109/EMB.2007.907081. PMID 18189086.
- ^ Russell WR, Schuster E, Smith AC, Spalding JM (April 1956). "Radcliffe respiration pumps". The Lancet 270 (6922): 539–41. PMID 13320798.
- ^ Bellis, Mary. "Forrest Bird invented a fluid control device, respirator & pediatric ventilator". About.com. http://inventors.about.com/od/bstartinventors/a/Forrest_Bird.htm. Retrieved 2009-06-04.
- ^ Skinner, M (1998). "Ventilator function under hyperbaric conditions". South Pacific Underwater Medicine Society Journal 28 (2). http://archive.rubicon-foundation.org/5927. Retrieved 2009-06-04.
- ^ Weaver LK, Greenway L, Elliot CG (1988). "Performance of the Seachrist 500A Hyperbaric Ventilator in a Monoplace Hyperbaric Chamber". Journal of Hyperbaric Medicine 3 (4): 215–225. http://archive.rubicon-foundation.org/4377. Retrieved 2009-06-04.
- Simulation of an anesthesia machine with a piston ventilator
- International Ventilator Users Network (IVUN), a subsidiary of Post-Polio Health International. Information about home mechanical ventilation.
- Information about SERVO ventilation
- United Hayek Industries - Only manufacturer of Biphasic Cuirass Ventilation
Health science · Medicine · Medical specialities · Intensive care medicine / Critical care medicine and Respiratory therapy General terms ConditionsOrgan system failureComplications Diagnosis Life supporting treatments Drugs ICU scoring systems Organisations Related specialties
Wikimedia Foundation. 2010.
Look at other dictionaries:
ventilator — n. 1) a device to ensure a supply of fresh air. 2) (respirator) equipment that is manually or mechanically operated to maintain a flow of air into and out of the lungs of a patient who is unable to breathe normally. Positive pressure ventilators… … The new mediacal dictionary
Ventilator-associated pneumonia — (VAP) is a sub type of hospital acquired pneumonia (HAP) which occurs in people who are on mechanical ventilation through an endotracheal or tracheostomy tube for at least 48 hours. VAP is a medical condition that results from infection which… … Wikipedia
Medical monitor — as used in anesthesia A medical monitor or physiological monitor or display, is an electronic medical device used in medical monitoring that displays the monitored data, and may or may not have the ability to transmit the data on a monitoring… … Wikipedia
Medical ethics — is a system of moral principles that apply values and judgments to the practice of medicine. As a scholarly discipline, medical ethics encompasses its practical application in clinical settings as well as work on its history, philosophy, theology … Wikipedia
Medical gas therapy — has been used in medicine since the use of oxygen therapy. Nitric oxide Nitric oxide Nitric oxide is a gas that is inhaled. It works by relaxing smooth muscle to widen (dilate) blood vessels, especially in the lungs. Nitric oxide is used … Wikipedia
Medical Logic Modules — Medical Logic Module (engl. für Medizinisches Logisches Modul) sind kleine austauschbare Wissensbausteine, die medizinisches Wissen beinhalten. Ziel bei der Entwicklung dieser Module war es, medizinisches Wissen in einer Form zu repräsentieren,… … Deutsch Wikipedia
Medical uses of silver — The medical uses of silver include its incorporation into wound dressings to treat external infections, and its use as an antiseptic and disinfectant in medical appliances. Silver is also promoted within alternative medicine in the form of… … Wikipedia
cuirass ventilator — see ventilator … The new mediacal dictionary
International Ventilator Users Network — The International Ventilator Users Network (IVUN) [ http://www.ventusers.org/ Homepage of International Ventilator Users Network] is a nonprofit network of mechanical ventilation users, respiratory health professionals, and ventilatory equipment… … Wikipedia
Negative pressure ventilator — This article is about the medical device. For the band, see Iron Lung (band). Negative pressure ventilator Intervention An Emerson iron lung. The patient lies within the chamber, which when sealed provides an effectively oscillating atmospheric… … Wikipedia