mathematics, specifically in complex analysisand algebraic geometry, the Riemann–Roch theorem is an important tool in the computation of the dimension of the space of meromorphic functions with prescribed zeroes and allowed poles. It relates the complex analysis of a connected compact Riemann surfacewith the surface's purely topological genus "g", in a way that can be carried over into purely algebraic settings.
Initially proved as Riemann's inequality, the theorem reached its definitive form for Riemann surfaces after work of Riemann's short-lived student
Gustav Rochin the 1850s. It was later generalized to algebraic curves, to higher-dimensional varieties and beyond.
We start with a connected compact Riemann surface of genus "g", and a fixed point "P" on it. We may look at functions having a pole only at "P". There is an increasing sequence of
vector spaces: functions with no poles(i.e., constant functions), functions allowed at most a simple pole at "P", functions allowed at most a double pole at "P", a triple pole, ... These spaces are all finite dimensional. In case "g" = 0 we can see that the sequence of dimensions starts
:1, 2, 3, ...:
this can be read off from the theory of
partial fractions. Conversely if this sequence starts
:1, 2, ...
then "g" must be zero (the so-called
In the theory of
elliptic functions it is shown that for "g" = 1 this sequence is
:1, 1, 2, 3, 4, 5 ... ;
and this characterises the case "g" = 1. For "g" > 2 there is no set initial segment; but we can say what the "tail" of the sequence must be. We can also see why "g" = 2 is somewhat special.
The reason that the results take the form they do goes back to the formulation ("Roch's part") of the theorem: as a difference of two such dimensions. When one of those can be set to zero, we get an exact formula, which is linear in the genus and the "degree" (i.e. number of "degrees of freedom"). Already the examples given allow a reconstruction in the shape
:"dimension" − "correction" = "degree" − "g" + 1.
For "g" = 1 the correction is 1 for degree 0; and otherwise 0. The full theorem explains the correction as the dimension associated to a further, 'complementary' space of functions.
Statement of the theorem
In now-accepted notation, the statement of Riemann–Roch for a compact Riemann surface of genus "g" is
:"l"("D") − "l"("K" − "D") = "deg"("D") − "g" + 1.
This applies to all "divisors" "D", elements of the
free abelian groupon the points of the surface. Equivalently, a divisor is a finite linear combination of points of the surface with integer coefficients.
We define the divisor of a meromorphic function "f" as
where "R"("f") is the set of all zeroes and poles of "f", and "sν" is given by
We define the divisor of a meromorphic
1-formsimilarly. A divisor of a global meromorphic function is called a principal divisor. Two divisors that differ by a principal divisor are called linearly equivalent. A divisor of a global meromorphic 1-form is called the canonical divisor(usually denoted "K"). Any two meromorphic 1-forms will yield linearly equivalent divisors, so the canonical divisor is uniquely determined up to linear equivalence (hence "the" canonical divisor).
The symbol "deg"("D") denotes the "degree" of the divisor "D", i.e. the sum of the coefficients occurring in "D". It can be shown that the divisor of a global meromorphic function always has degree 0, so the degree of the divisor depends only on the linear equivalence class.
The number "l"(D) is the quantity that is of primary interest: the dimension (over C) of the vector space of meromorphic functions "g" on the surface, such that all the coefficients of ("g") + "D" are non-negative. Intuitively, we can think of this as being all meromorphic functions whose poles at every point are no worse than the corresponding coefficient in "D"; if the coefficient in "D" at "z" is negative, then we require that "g" has a zero of at least that
multiplicityat "z" – if the coefficient in "D" is positive, "g" can have a pole of at most that order. The vector spaces for linearly equivalent divisors are naturally isomorphic through multiplication with the global meromorphic function (which is well-defined up to a scalar).
Even if we don't know anything about "K", we know at least that the index of speciality [Stichtenoth p.22] [Mukai pp.295-297] (the "correction" referred to above)
:"l"("K" − "D") ≥ 0,
:"l"(D) ≥ "deg"("D") − "g" + 1
which is Riemann's inequality mentioned earlier.
The theorem above is correct for all compact connected Riemann surfaces. The formula also holds for all non-singular projective algebraic curves over an
algebraically closed field"k". Here "l"("D") denotes the dimension (over "k") of the space of rational functions on the curve whose poles at every point are not worse than the corresponding coefficient in "D".
To relate this to our example above, we need some information about "K": for "g" = 1 we can take "K" = 0, while for "g" = 0 we can take "K" = −2"P" (any "P"). In general K has degree 2"g" − 2. As long as "D" has degree at least 2"g" − 1 we can be sure that the correction term is 0.
Going back therefore to the case "g" = 2 we see that the sequence mentioned above is
:1, 1, ?, 2, 3, ... .
It is shown from this that the ? term of degree 2 is either 1 or 2, of course depending on the point. It can be proven that in any genus 2 curve there are exactly six points whose sequences are 1, 1, 2, 2, ... and the rest of the points have the generic sequence 1, 1, 1, 2, ... In particular, a genus 2 curve is a
hyperelliptic curve. For "g" > 2 it is always true that at most points the sequence starts with "g+1" ones and there are finitely many points with other sequences (see Weierstrass points).
A long road of generalisation
The Riemann–Roch theorem for curves was proved for Riemann surfaces by Riemann and Roch in the 1850s and for algebraic curves by
F. K. Schmidtin 1929. It is foundational in the sense that the subsequent theory for curves tries to refine the information it yields (for example in the Brill–Noether theory).
There are versions in higher dimensions (for the appropriate notion of divisor, or
line bundle). Their general formulation depends on splitting the theorem into two parts. One, which would now be called Serre duality, interprets the "l"("K" − "D") term as a dimension of a first sheaf cohomologygroup; with "l"("D") the dimension of a zeroth cohomology group, or space of sections, the left-hand side of the theorem becomes an Euler characteristic, and the right-hand side a computation of it as a "degree" corrected according to the topology of the Riemann surface.
algebraic geometryof dimension two such a formula was found by the geometers of the Italian school; a Riemann–Roch theorem for algebraic surfaceswas proved (there are several versions, with the first possibly being due to Max Noether). So matters rested before about 1950.
An "n"-dimensional generalisation, the
Hirzebruch–Riemann–Roch theorem, was found and proved by Friedrich Hirzebruch, as an application of characteristic classes in algebraic topology; he was much influenced by the work of Kunihiko Kodaira. At about the same time Jean-Pierre Serrewas giving the general form of Serre duality, as we now know it. Alexander Grothendieckproved a far-reaching generalization in 1957, now known as the Grothendieck–Riemann–Roch theorem. His work reinterprets Riemann–Roch not as a theorem about a variety, but about a morphism between two varieties. (The folk-history suggests Grothendieck had a result somewhat earlier; it was written up finally by Serre and Armand Borel.)
Finally a general version was found in
algebraic topology, too. These developments were essentially all carried out between 1950 and 1960. After that the Atiyah–Singer index theoremopened another route to generalization.
What results is that the Euler characteristic (of a
coherent sheaf) is something reasonably computable as a " left-hand side". If one is interested, as is usually the case, in just one summand within the alternating sum, further arguments such as vanishing theorems must be brought to bear.
*, see pages 208–219 for the proof in the complex situation. Note that Jost uses slightly different notation.
* | year=1977, contains the statement for curves over an algebraically closed field. See section IV.1.
* | year=1995. A good general modern reference.
* [http://www.math.ucdavis.edu/~kapovich/ Misha Kapovich] , [http://www.math.ucdavis.edu/%7Ekapovich/RS/RiemannRoch.pdf "The Riemann–Roch Theorem] (lecture note) an elementary introduction
Wikimedia Foundation. 2010.
Look at other dictionaries:
Riemann-Roch-Theorem — Der Satz von Riemann Roch (nach dem Mathematiker Bernhard Riemann und seinem Schüler Gustav Roch) ist eine zentrale Aussage der Theorie kompakter riemannscher Flächen. Er gibt an, wie viele linear unabhängige meromorphe Funktionen mit… … Deutsch Wikipedia
Riemann–Roch theorem for surfaces — In mathematics, the Riemann–Roch theorem for surfaces describes the dimension of linear systems on an algebraic surface. The classical form of it was first given by Castelnuovo (1896, 1897), after preliminary versions of it were found by… … Wikipedia
Riemann-Roch theorem for smooth manifolds — In mathematics, a Riemann Roch theorem for smooth manifolds is a version of results such as the Hirzebruch Riemann Roch theorem or Grothendieck Riemann Roch theorem (GRR) without a hypothesis making the smooth manifolds involved carry a complex… … Wikipedia
Hirzebruch–Riemann–Roch theorem — In mathematics, the Hirzebruch–Riemann–Roch theorem, named after Friedrich Hirzebruch, Bernhard Riemann, and Gustav Roch, is Hirzebruch s 1954 result contributing to the Riemann–Roch problem for complex algebraic varieties of all dimensions. It… … Wikipedia
Grothendieck–Hirzebruch–Riemann–Roch theorem — In mathematics, specifically in algebraic geometry, the Grothendieck–Riemann–Roch theorem is a far reaching result on coherent cohomology. It is a generalisation of the Hirzebruch–Riemann–Roch theorem, about complex manifolds, which is itself a… … Wikipedia
Riemann surface — For the Riemann surface of a subring of a field, see Zariski–Riemann space. Riemann surface for the function ƒ(z) = √z. The two horizontal axes represent the real and imaginary parts of z, while the vertical axis represents the real… … Wikipedia
Atiyah–Singer index theorem — In the mathematics of manifolds and differential operators, the Atiyah–Singer index theorem states that for an elliptic differential operator on a compact manifold, the analytical index (closely related to the dimension of the space of solutions) … Wikipedia
Bernhard Riemann — Infobox Scientist name =Bernhard Riemann box width =300px image width =225px caption =Bernhard Riemann, 1863 birth date =September 17, 1826 birth place =Breselenz, Germany death date =death date and age|1866|7|20|1826|9|17 death place =Selasca,… … Wikipedia
De Franchis theorem — In mathematics, the de Franchis theorem is one of a number of closely related statements applying to compact Riemann surfaces, or, more generally, algebraic curves, X and Y, in the case of genus g > 1. The simplest is that the automorphism… … Wikipedia
Gustav Roch — Pour les articles homonymes, voir Roch. Gustav Roch Gustav Roch Naissance 9 décembre 1 … Wikipédia en Français