H.264 is a standard for
video compression. It is also known as MPEG-4 Part 10, or MPEG-4 AVC (for Advanced Video Coding). As of 2008, it is the latest block-oriented motion-compensation-based codec standard developed by the ITU-T Video Coding Experts Group(VCEG) together with the ISO/IEC Moving Picture Experts Group(MPEG), and it was the product of a partnership effort known as the Joint Video Team (JVT). The ITU-T H.264 standard and the ISO/IEC MPEG-4Part 10 standard (formally, ISO/IEC 14496-10) are jointly maintained so that they have identical technical content. The final drafting work on the first version of the standard was completed in May 2003.
The intent of the H.264/AVC project was to create a standard capable of providing good video quality at substantially lower bit rates than previous standards (e.g. half or less the bit rate of
MPEG-2, H.263, or MPEG-4 Part 2), without increasing the complexity of design so much that it would be impractical or excessively expensive to implement. An additional goal was to provide enough flexibility to allow the standard to be applied to a wide variety of applications on a wide variety of networks and systems, including low and high bit rates, low and high resolution video, broadcast, DVDstorage, RTP/IP packet networks, and ITU-Tmultimedia telephonysystems.
The standardization of the first version of H.264/AVC was completed in May 2003. The JVT then developed extensions to the original standard that are known as the Fidelity Range Extensions (FRExt). These extensions enable higher quality video coding by supporting increased sample bit depth precision and higher-resolution color information, including sampling structures known as and . Several other features are also included in the Fidelity Range Extensions project, such as adaptive switching between 4×4 and 8×8 integer transforms, encoder-specified perceptual-based quantization weighting matrices, efficient inter-picture lossless coding, and support of additional color spaces. The design work on the Fidelity Range Extensions was completed in July 2004, and the drafting work on them was completed in September 2004.
Further recent extensions of the standard have included adding five new profiles intended primarily for professional applications, adding extended-gamut color space support, defining additional aspect ratio indicators, defining two additional types of "supplemental enhancement information" (post-filter hint and tone mapping), and deprecating one of the prior FRExt profiles that industry feedback indicated should have been designed differently.
Scalable Video Codingas specified in Annex G of H.264/AVC allows the construction of bitstreams that contain sub-bitstreams that conform to H.264/AVC. For temporal bitstream scalability, i.e., the presence of a sub-bitstream with a smaller temporal sampling rate than the bitstream, complete access units are removed from the bitstream when deriving the sub-bitstream. In this case, high-level syntax and inter prediction reference pictures in the bitstream are constructed accordingly. For spatial and quality bitstream scalability, i.e. the presence of a sub-bitstream with lower spatial resolution or quality than the bitstream, NAL units are removed from the bitstream when deriving the sub-bitstream. In this case, inter-layer prediction, i.e., the prediction of the higher spatial resolution or quality signal by data of the lower spatial resolution or quality signal, is typically used for efficient coding. The Scalable Video Codingextension was completed in November 2007.
The H.264 name follows the
ITU-Tnaming convention, where the standard is a member of the H.26x line of VCEG video coding standards; the MPEG-4 AVC name relates to the naming convention in ISO/IEC MPEG, where the standard is part 10 of ISO/IEC 14496, which is the suite of standards known as MPEG-4. The standard was developed jointly in a partnership of VCEG and MPEG, after earlier development work in the ITU-T as a VCEG project called H.26L. It is thus common to refer to the standard with names such as H.264/AVC, AVC/H.264, H.264/MPEG-4 AVC, or MPEG-4/H.264 AVC, to emphasize the common heritage. The name H.26L, referring to its ITU-T history, is less common, but still used. Occasionally, it is also referred to as "the JVT codec", in reference to the Joint Video Team (JVT) organization that developed it. (Such partnership and multiple naming is not uncommon—for example, the video codec standard known as MPEG-2also arose from the partnership between MPEGand the ITU-T, where MPEG-2video is known to the ITU-T community as H.262. [cite web|url=http://itu.int/rec/T-REC-H.262|title=H.262 : Information technology - Generic coding of moving pictures and associated audio information: Video|accessdate=2007-04-15] )
H.264/AVC/MPEG-4 Part 10 contains a number of new features that allow it to compress video much more effectively than older standards and to provide more flexibility for application to a wide variety of network environments. In particular, some such key features include:
* Multi-picture inter-picture prediction including the following features:
** Using previously-encoded pictures as references in a much more flexible way than in past standards, allowing up to 16 reference frames (or 32 reference fields, in the case of interlaced encoding) to be used in some cases. This is in contrast to prior standards, where the limit was typically one; or, in the case of conventional "B pictures", two. This particular feature usually allows modest improvements in bit rate and quality in most scenes. But in certain types of scenes, such as those with repetitive motion or back-and-forth scene cuts or uncovered background areas, it allows a significant reduction in bit rate while maintaining clarity.
** Variable block-size
motion compensation(VBSMC) with block sizes as large as 16×16 and as small as 4×4, enabling precise segmentation of moving regions. The supported luma prediction block sizes include 16×16, 16×8, 8×16, 8×8, 8×4, 4×8, and 4×4, many of which can be used together in a single macroblock. Chroma prediction block sizes are correspondingly smaller according to the chroma subsamplingin use.
** The ability to use multiple motion vectors per macroblock (one or two per partition) with a maximum of 32 in the case of a B macroblock constructed of 16 4x4 partitions. The motion vectors for each 8×8 or larger partition region can point to different reference pictures.
** The ability to use any macroblock type in B-frames, including I-macroblocks, resulting in much more efficient encoding when using B-frames. This feature was notably left out from
** Six-tap filtering for derivation of half-pel luma sample predictions, for sharper subpixel motion-compensation. Quarter-pixel motion is derived by linear interpolation of the halfpel values, to save processing power.
** Quarter-pixel precision for motion compensation, enabling precise description of the displacements of moving areas. For chroma the resolution is typically halved both vertically and horizontally (see ) therefore the motion compensation of chroma uses one-eighth chroma pixel grid units.
** Weighted prediction, allowing an encoder to specify the use of a scaling and offset when performing
motion compensation, and providing a significant benefit in performance in special cases—such as fade-to-black, fade-in, and cross-fade transitions. This includes implicit weighted prediction for B-frames, and explicit weighted prediction for P-frames.
* Spatial prediction from the edges of neighboring blocks for "intra"coding, rather than the "DC"-only prediction found in
MPEG-2Part 2 and the transform coefficient prediction found in H.263v2 and MPEG-4 Part 2. This includes luma prediction block sizes of 16×16, 8×8, and 4×4 (of which only one type can be used within each macroblock).
Losslessmacroblock coding features including:
** A lossless PCM macroblock representation mode in which video data samples are represented directly, allowing perfect representation of specific regions and allowing a strict limit to be placed on the quantity of coded data for each macroblock.
** An enhanced lossless macroblock representation mode allowing perfect representation of specific regions while ordinarily using substantially fewer bits than the PCM mode.
interlaced-scan video coding features, including:
** Macroblock-adaptive frame-field (MBAFF) coding, using a macroblock pair structure for pictures coded as frames, allowing 16×16 macroblocks in field mode (compared with 16×8 half-macroblocks in MPEG-2).Clarifyme|date=March 2008
** Picture-adaptive frame-field coding (PAFF or PicAFF) allowing a freely-selected mixture of pictures coded as MBAFF frames with pictures coded as individual single fields (half frames) of interlaced video.Clarifyme|date=March 2008
* New transform design features, including:
** An exact-match integer 4×4 spatial block transform, allowing precise placement of residual signals with little of the "ringing" often found with prior codec designs. This is conceptually similar to the well-known DCT design, but simplified and made to provide exactly-specified decoding.
** An exact-match integer 8×8 spatial block transform, allowing highly correlated regions to be compressed more efficiently than with the 4×4 transform. This is conceptually similar to the well-known DCT design, but simplified and made to provide exactly-specified decoding.
** Adaptive encoder selection between the 4×4 and 8×8 transform block sizes for the integer transform operation.
** A secondary
Hadamard transformperformed on "DC" coefficients of the primary spatial transform applied to chroma DC coefficients (and also luma in one special case) to obtain even more compression in smooth regions.
* A quantization design including:
** Logarithmic step size control for easier bit rate management by encoders and simplified inverse-quantization scaling.
** Frequency-customized quantization scaling matrices selected by the encoder for perceptual-based quantization optimization.
* An in-loop deblocking filter which helps prevent the blocking artifacts common to other DCT-based image compression techniques, resulting in better visual appearance and compression efficiency.
* An entropy coding design including:
Context-adaptive binary arithmetic coding(CABAC), an algorithm to losslessly compress syntax elements in the video stream knowing the probabilities of syntax elements in a given context. CABAC compresses data more efficiently than CAVLC but requires considerably more processing to decode.
Context-adaptive variable-length coding(CAVLC), which is a lower-complexity alternative to CABAC for the coding of quantized transform coefficient values. Although lower complexity than CABAC, CAVLC is more elaborate and more efficient than the methods typically used to code coefficients in other prior designs.
** A common simple and highly structured variable length coding (VLC) technique for many of the syntax elements not coded by CABAC or CAVLC, referred to as
Exponential-Golomb coding(or Exp-Golomb).
* Loss resilience features including:
** A network abstraction layer (NAL) definition allowing the same video syntax to be used in many network environments, including features such as sequence parameter sets (SPSs) and picture parameter sets (PPSs) that provide more robustness and flexibility than provided in prior designs.
Flexible macroblock ordering(FMO), also known as slice groups, and arbitrary slice ordering (ASO), which are techniques for restructuring the ordering of the representation of the fundamental regions ("macroblocks") in pictures. Typically considered an error/loss robustness feature, FMO and ASO can also be used for other purposes.
** Data partitioning (DP), a feature providing the ability to separate more important and less important syntax elements into different packets of data, enabling the application of unequal error protection (UEP) and other types of improvement of error/loss robustness.
** Redundant slices (RS), an error/loss robustness feature allowing an encoder to send an extra representation of a picture region (typically at lower fidelity) that can be used if the primary representation is corrupted or lost.
** Frame numbering, a feature that allows the creation of "sub-sequences", enabling temporal scalability by optional inclusion of extra pictures between other pictures, and the detection and concealment of losses of entire pictures, which can occur due to network packet losses or channel errors.
* Switching slices, called SP and SI slices, allowing an encoder to direct a decoder to jump into an ongoing video stream for such purposes as video streaming bit rate switching and "trick mode" operation. When a decoder jumps into the middle of a video stream using the SP/SI feature, it can get an exact match to the decoded pictures at that location in the video stream despite using different pictures, or no pictures at all, as references prior to the switch.
* A simple automatic process for preventing the accidental emulation of
start codes, which are special sequences of bits in the coded data that allow random access into the bitstream and recovery of byte alignment in systems that can lose byte synchronization.
* Supplemental enhancement information (SEI) and video usability information (VUI), which are extra information that can be inserted into the bitstream to enhance the use of the video for a wide variety of purposes.Clarifyme|date=March 2008
* Auxiliary pictures, which can be used for such purposes as
* Support of monochrome, 4:2:0, 4:2:2, and 4:4:4
chroma subsampling(depending on the selected profile).
* Support of sample bit depth precision ranging from 8 to 14 bits per sample (depending on the selected profile).
* The ability to encode individual color planes as distinct pictures with their own slice structures, macroblock modes, motion vectors, etc., allowing encoders to be designed with a simple parallelization structure (supported only in the three 4:4:4-capable profiles).
* Picture order count, a feature that serves to keep the ordering of the pictures and the values of samples in the decoded pictures isolated from timing information, allowing timing information to be carried and controlled/changed separately by a system without affecting decoded picture content.
These techniques, along with several others, help H.264 to perform significantly better than any prior standard under a wide variety of circumstances in a wide variety of application environments. H.264 can often perform radically better than
MPEG-2video—typically obtaining the same quality at half of the bit rate or less, especially on high bit rate and high resolution situations. [ [http://www.apple.com/quicktime/technologies/h264/faq.html Apple: H.264 FAQ] ]
Like other ISO/IEC MPEG video standards, H.264/AVC has a reference software implementation that can be freely downloaded [ [http://iphome.hhi.de/suehring/tml/download/ H.264/AVC JM Reference Software Download] ] . Its main purpose is to give examples of H.264/AVC features, rather than being a useful application "per se". Some reference hardware design work is also under way in the
Moving Picture Experts Group.The above mentioned are complete features of H.264/AVC covering all profiles of H.264. A profile for a codec is a set of features of that codec identified to meet certain set of specifications of intended applications. This means that many of the features listed are not supported in some profiles. Various profiles of H.264/AVC are discussed in next section.
The standard includes the following seven sets of capabilities, which are referred to as "profiles", targeting specific classes of applications:
* Baseline Profile (BP): Primarily for lower-cost applications with limited computing resources, this profile is used widely in videoconferencing and mobile applications.
* Main Profile (MP): Originally intended as the mainstream consumer profile for broadcast and storage applications, the importance of this profile faded when the High profile was developed for those applications.
* Extended Profile (XP): Intended as the streaming video profile, this profile has relatively high compression capability and some extra tricks for robustness to data losses and server stream switching.
* High Profile (HiP): The primary profile for broadcast and disc storage applications, particularly for high-definition television applications (this is the profile adopted into
HD DVDand Blu-rayDisc, for example).
* High 10 Profile (Hi10P): Going beyond today's mainstream consumer product capabilities, this profile builds on top of the High Profile—adding support for up to 10 bits per sample of decoded picture precision.
* High 4:2:2 Profile (Hi422P): Primarily targeting professional applications that use interlaced video, this profile builds on top of the High 10 Profile—adding support for the 4:2:2
chroma subsamplingformat while using up to 10 bits per sample of decoded picture precision.
* High 4:4:4 Predictive Profile (Hi444PP): This profile builds on top of the High 4:2:2 Profile—supporting up to 4:4:4 chroma sampling, up to 14 bits per sample, and additionally supporting efficient lossless region coding and the coding of each picture as three separate color planes.
In addition, the standard contains four additional "all-Intra profiles", which are defined as simple subsets of other corresponding profiles. These are mostly for professional (e.g., camera and editing system) applications:
* High 10 Intra Profile: The High 10 Profile constrained to all-Intra use.
* High 4:2:2 Intra Profile: The High 4:2:2 Profile constrained to all-Intra use.
* High 4:4:4 Intra Profile: The High 4:4:4 Profile constrained to all-Intra use.
* CAVLC 4:4:4 Intra Profile: The High 4:4:4 Profile constrained to all-Intra use and to CAVLC entropy coding (i.e., not supporting CABAC).
As a result of the
Scalable Video Codingextension, the standard contains three additional "scalable profiles", which are defined as a combination of the H.264/AVC profile for the base layer (2nd word in scalable profile name) and tools that achieve the scalable extension:
* Scalable Baseline Profile: Primarily targeting video conferencing, mobile, and surveillance applications, this profile builds on top of a constrained version of the H.264/AVC Baseline profile to which the base layer (a subset of the bitstream) must conform. For the scalability tools, a subset of the available tools is enabled.
* Scalable High Profile: Primarily targeting broadcast and streaming applications, this profile builds on top of the H.264/AVC High Profile to which the base layer must conform.
* Scalable High Intra Profile: Primarily targeting production applications, this profile is the Scalable High Profile constrained to all-Intra use.
Comparison of H.264 and VC-1
H.264/MPEG-4 AVC Products and Implementations
Moving Picture Experts Group(MPEG)
ITU-T Video Coding Experts Group(VCEG)
List of devices that support H.264/MPEG-4 AVC
x264– Software encoder
* [http://ip.hhi.de/imagecom_G1/assets/pdfs/csvt_overview_0305.pdf IEEE Overview of the H.264/AVC Video Coding Standard]
* [http://www.fastvdo.com/spie04/spie04-h264OverviewPaper.pdf Overview and Introduction to the Fidelity Range Extensions]
*cite web|url=http://www.vcodex.com/h264.html|title=Vcodex: H.264 Tutorials|accessdate=2007-04-15
*cite web|url=http://forum.doom9.org/showthread.php?t=96059|title=MPEG-4 AVC/H.264 Information - Doom9's Forum|accessdate=2007-04-15
*cite web|url=http://www.itu.int/rec/T-REC-H.264|title=ITU-T publication page: H.264: Advanced video coding for generic audiovisual services |accessdate=2007-09-13
*cite web|url=http://www.iso.ch/iso/en/CatalogueDetailPage.CatalogueDetail?CSNUMBER=43058&ICS1=35&ICS2=40&ICS3=|title=ISO publication page: ISO/IEC 14496-10:2005 – Information technology – Coding of audio-visual objects – Part 10: Advanced Video Coding|accessdate=2007-09-13
*cite web|url=http://iphome.hhi.de/suehring/tml/|title=IP Homepage - H.264/AVC JM Reference Software|accessdate=2007-04-15
tandardization committee documents
*cite web|url=http://ftp3.itu.ch/av-arch/jvt-site|title=JVT document archive site|accessdate=2007-05-06
*cite web|url=http://www.apple.com/quicktime/hdgallery/|title=Apple - QuickTime - HD Gallery (R)|accessdate=2007-04-15
*cite web|url=http://www.apple.com/trailers/|title=Apple - Movie Trailers|accessdate=2007-04-15
*cite web|url=http://iphome.hhi.de/wiegand/pubs.htm|title=Publications - Thomas Wiegand|accessdate=2007-06-23
*cite web|url=http://iphome.hhi.de/marpe/pub.htm|title=Publications - Detlev Marpe|accessdate=2007-04-15
*cite web|url=http://www.compression.ru/video/codec_comparison/mpeg-4_avc_h264_2007_en.html| title=Fourth Annual H.264 video codecs comparison
*cite web|url=http://techdigger.wordpress.com/2008/05/21/264-mp4-hd-codec-review-coreavc-ffmpeg/| title=Comparison between CoreAVC and FFmpeg
Wikimedia Foundation. 2010.
Look at other dictionaries:
H.264/MPEG-4 AVC — H.264 o MPEG 4 parte 10 es una norma que define un códec de vídeo de alta compresión, desarrollada conjuntamente por el ITU T Video Coding Experts Group (VCEG) y el ISO/IEC Moving Picture Experts Group (MPEG). La intención del proyecto H.264/AVC… … Wikipedia Español
H.264/MPEG-4 AVC — ist ein Standard zur hocheffizienten Videokompression. Er wurde zunächst von der ITU (Study Group 16, Video Coding Experts Group) unter dem Namen H.26L entwickelt. Im Jahre 2001 schloss sich die ITU Gruppe mit MPEG Visual zusammen und führte die… … Deutsch Wikipedia
H.264/MPEG-4 AVC — H.264, MPEG 4 Part 10, или AVC ( Advanced Video Coding ) стандарт сжатия видео, предназначенный для достижения высокой степени сжатия видеопотока при сохранении высокого качества. Он был создан ITU T Video Coding Experts Group (VCEG) совместно с… … Википедия
H.264/MPEG-4 AVC — H.264, o MPEG 4 parte 10, es un códec digital de alta compresión estándar escrito por el ITU T Video Coding Experts Group (VCEG) junto con el ISO/IEC Moving Picture Experts Group (MPEG) como producto del esfuerzo de colaboración colectivo… … Enciclopedia Universal
H.264/MPEG-4 AVC products and implementations — Prominent software implementations*Adobe Systems supports the playback of H.264 in Adobe Flash 9.x. They also support export and output of H.264 in Premiere Pro version CS2 (shipped in 2005). In latest version, Premiere Pro CS3 (shipped in 2007) … Wikipedia
List of devices that support H.264/MPEG-4 AVC — Devices listed by manufacturer A *Aiptek ** GO HD *Apple ** iPod classic (5th/6th Generation Only) ** iPod nano (3rd Generation Only) ** iPod touch ** Apple TV ** iPhone * ADB [http://en.wikipedia.org/wiki/Advanced Digital Broadcast/website]… … Wikipedia
MPEG-4 AVC — H.264 Pour les articles homonymes, voir AVC. H.264, ou MPEG 4 AVC (Advanced Video Coding), est une norme de codage vidéo développée conjointement par l UIT T Q.6/SG16 Video Coding Experts Group (VCEG) ainsi que l ISO/CEI Moving Picture Experts… … Wikipédia en Français
MPEG-4/AVC — H.264/MPEG 4 AVC ist ein Standard zur hocheffizienten Videokompression. Er wurde zunächst von der ITU (Study Group 16, Video Coding Experts Group) unter dem Namen H.26L entwickelt. Im Jahre 2001 schloss sich die ITU Gruppe mit MPEG Visual… … Deutsch Wikipedia
MPEG-4 AVC — H.264/MPEG 4 AVC ist ein Standard zur hocheffizienten Videokompression. Er wurde zunächst von der ITU (Study Group 16, Video Coding Experts Group) unter dem Namen H.26L entwickelt. Im Jahre 2001 schloss sich die ITU Gruppe mit MPEG Visual… … Deutsch Wikipedia
MPEG-4 AVC — H.264 … Universal-Lexikon