Figure of the Earth

Geodesy Fundamentals Geodesy · Geodynamics
Geomatics · CartographyConcepts Datum · Distance · Geoid
Figure of the Earth
Geodetic system
Geog. coord. system
Hor. pos. representation
Map projection
Reference ellipsoid
Satellite geodesy
Spatial reference systemTechnologies GNSS · GPS · ... Standards ED50 · ETRS89 · NAD83
NAVD88 · SAD69 · SRID
UTM · WGS84 · ...History History of geodesy
NAVD29 · ...v · geodesy according to the way it is used and the precision with which the Earth's size and shape is to be defined. The actual topographic surface is most apparent with its variety of land forms and water areas. This is, in fact, the surface on which actual Earth measurements are made. It is not suitable, however, for exact mathematical computations, because the formulas which would be required to take the irregularities into account would necessitate a prohibitive amount of computations. The topographic surface is generally the concern of topographers and hydrographers. The Pythagorean concept of a spherical Earth offers a simple surface which is mathematically easy to deal with. Many astronomical and navigational computations use it as a surface representing the Earth. While the sphere is a close approximation of the true figure of the Earth and satisfactory for many purposes, to the geodesists interested in the measurement of long distances—spanning continents and oceans—a more exact figure is necessary. Closer approximations range from modelling the shape of the entire Earth as an oblate spheroid or an oblate ellipsoid, to the use of spherical harmonics or local approximations in terms of local reference ellipsoids. The idea of a planar or flat surface for Earth, however, is still acceptable for surveys of small areas, as local topography is more important than the curvature. Planetable surveys are made for relatively small areas, and no account is taken of the curvature of the Earth. A survey of a city would likely be computed as though the Earth were a plane surface the size of the city. For such small areas, exact positions can be determined relative to each other without considering the size and shape of the total Earth.
In the mid to late 20th century, research across the geosciences contributed to drastic improvements in the accuracy of the Figure of the Earth. The primary utility (and the motivation for funding, mainly from the military) of this improved accuracy was to provide geographical and gravitational data for the inertial guidance systems of ballistic missiles. This funding also drove the expansion of geoscientific disciplines, fostering the creation and growth of various geoscience departments at many universities.^{[1]}
Contents
Ellipsoid of revolution
Main article: Reference ellipsoidSince the Earth is flattened at the poles and bulging at the equator, the geometrical figure used in geodesy to most nearly approximate Earth's shape is an oblate spheroid. An oblate spheroid, or oblate ellipsoid, is an ellipsoid of revolution obtained by rotating an ellipse about its shorter axis. A spheroid describing the figure of the Earth or other celestial body is called a reference ellipsoid. The reference ellipsoid for the Earth is called Earth ellipsoid.
An ellipsoid of revolution is uniquely defined by two numbers two dimensions, or one dimension and a number representing the difference between the two dimensions. Geodesists, by convention, use the semimajor axis and flattening. The size is represented by the radius at the equator—the semimajor axis of the crosssectional ellipse—and designated by the letter a. The shape of the ellipsoid is given by the flattening, f, which indicates how much the ellipsoid departs from spherical. (In practice, the two defining numbers are usually the equatorial radius and the reciprocal of the flattening, rather than the flattening itself; for the WGS84 spheroid used by today's GPS systems, the reciprocal of the flattening is set at 298.257223563 exactly.)
The difference between a sphere and a reference ellipsoid for Earth is small, only about one part in 300. Historically flattening was computed from grade measurements. Nowadays geodetic networks and satellite geodesy are used. In practice, many reference ellipsoids have been developed over the centuries from different surveys. The flattening value varies slightly from one reference ellipsoid to another, reflecting local conditions and whether the reference ellipsoid is intended to model the entire earth or only some portion of it.
A sphere has a single radius of curvature, which is simply the radius of the sphere. More complex surfaces have radii of curvature that vary over the surface. The radius of curvature describes the radius of the sphere that best approximates the surface at that point. Oblate ellipsoids have constant radius of curvature east to west along parallels, if a graticule is drawn on the surface, but varying curvature in any other direction. For an oblate ellipsoid, the polar radius of curvature r_{p} is larger than the equatorial
because the pole is flattened: the flatter the surface, the larger the sphere must be to approximate it. Conversely, the ellipsoid's northsouth radius of curvature at the equator r_{e} is smaller than the polar
Historical Earth ellipsoids
Main article: Earth ellipsoidThe reference ellipsoid models listed below have had utility in geodetic work and many are still in use. The older ellipsoids are named for the individual who derived them and the year of development is given. In 1887 the English mathematician Col Alexander Ross Clarke CB FRS RE was awarded the Gold Medal of the Royal Society for his work in determining the figure of the Earth. The international ellipsoid was developed by John Fillmore Hayford in 1910 and adopted by the International Union of Geodesy and Geophysics (IUGG) in 1924, which recommended it for international use.
At the 1967 meeting of the IUGG held in Lucerne, Switzerland, the ellipsoid called GRS67 (Geodetic Reference System 1967) in the listing was recommended for adoption. The new ellipsoid was not recommended to replace the International Ellipsoid (1924), but was advocated for use where a greater degree of accuracy is required. It became a part of the GRS67 which was approved and adopted at the 1971 meeting of the IUGG held in Moscow. It is used in Australia for the Australian Geodetic Datum and in South America for the South American Datum 1969.
The GRS80 (Geodetic Reference System 1980) as approved and adopted by the IUGG at its Canberra, Australia meeting of 1979 is based on the equatorial radius (semimajor axis of Earth ellipsoid) a, total mass GM, dynamic form factor J_{2} and angular velocity of rotation ω, making the inverse flattening 1 / f a derived quantity. The minute difference in 1 / f seen between GRS80 and WGS84 results from an unintentional truncation in the latter's defining constants: while the WGS84 was designed to adhere closely to the GRS80, incidentally the WGS84 derived flattening turned out to be slightly different than the GRS80 flattening because the normalized second degree zonal harmonic gravitational coefficient, that was derived from the GRS80 value for J2, was truncated to 8 significant digits in the normalization process.^{[2]}
An ellipsoidal model describes only the ellipsoid's geometry and a normal gravity field formula to go with it. Commonly an ellipsoidal model is part of a more encompassing geodetic datum. For example, the older ED50 (European Datum 1950) is based on the Hayford or International Ellipsoid. WGS84 is peculiar in that the same name is used for both the complete geodetic reference system and its component ellipsoidal model. Nevertheless the two concepts—ellipsoidal model and geodetic reference system—remain distinct.
Note that the same ellipsoid may be known by different names. It is best to mention the defining constants for unambiguous identification.
Reference ellipsoid name Equatorial radius (m) Polar radius (m) Inverse flattening Where used Maupertuis (1738) 6,397,300 6,363,806.283 191 France Plessis^{[disambiguation needed ]} (1817) 6,376,523.0 6,355,862.9333 308.64 France Everest (1830) 6,377,299.365 6,356,098.359 300.80172554 India Everest 1830 Modified (1967) 6,377,304.063 6,356,103.0390 300.8017 West Malaysia & Singapore Everest 1830 (1967 Definition) 6,377,298.556 6,356,097.550 300.8017 Brunei & East Malaysia Airy (1830) 6,377,563.396 6,356,256.909 299.3249646 Britain Bessel (1841) 6,377,397.155 6,356,078.963 299.1528128 Europe, Japan Clarke (1866) 6,378,206.4 6,356,583.8 294.9786982 North America Clarke (1878) 6,378,190 6,356,456 293.4659980 North America Clarke (1880) 6,378,249.145 6,356,514.870 293.465 France, Africa Helmert (1906) 6,378,200 6,356,818.17 298.3 Hayford (1910) 6,378,388 6,356,911.946 297 USA International (1924) 6,378,388 6,356,911.946 297 Europe NAD 27 (1927) 6,378,206.4 6,356,583.800 294.978698208 North America Krassovsky (1940) 6,378,245 6,356,863.019 298.3 USSR WGS66 (1966) 6,378,145 6,356,759.769 298.25 USA/DoD Australian National (1966) 6,378,160 6,356,774.719 298.25 Australia New International (1967) 6,378,157.5 6,356,772.2 298.24961539 GRS67 (1967) 6,378,160 6,356,774.516 298.247167427 South American (1969) 6,378,160 6,356,774.719 298.25 South America WGS72 (1972) 6,378,135 6,356,750.52 298.26 USA/DoD GRS80 (1979) 6,378,137 6,356,752.3141 298.257222101 Global ITRS^{[3]} WGS84 (1984) 6,378,137 6,356,752.3142 298.257223563 Global GPS IERS (1989) 6,378,136 6,356,751.302 298.257 IERS (2003)^{[4]} 6,378,136.6 6,356,751.9 298.25642 ^{[3]} More complicated figures
The possibility that the Earth's equator is an ellipse rather than a circle and therefore that the ellipsoid is triaxial has been a matter of scientific controversy for many years. Modern technological developments have furnished new and rapid methods for data collection and since the launch of Sputnik 1, orbital data have been used to investigate the theory of ellipticity.
A second theory, more complicated than triaxiality, proposed that observed long periodic orbital variations of the first Earth satellites indicate an additional depression at the south pole accompanied by a bulge of the same degree at the north pole. It is also contended that the northern middle latitudes were slightly flattened and the southern middle latitudes bulged in a similar amount. This concept suggested a slightly pearshaped Earth and was the subject of much public discussion. Modern geodesy tends to retain the ellipsoid of revolution and treat triaxiality and pear shape as a part of the geoid figure: they are represented by the spherical harmonic coefficients C_{22},S_{22} and C_{30}, respectively, corresponding to degree and order numbers 2.2 for the triaxiality and 3.0 for the pear shape.
Geoid
It was stated earlier that measurements are made on the apparent or topographic surface of the Earth and it has just been explained that computations are performed on an ellipsoid. One other surface is involved in geodetic measurement: the geoid. In geodetic surveying, the computation of the geodetic coordinates of points is commonly performed on a reference ellipsoid closely approximating the size and shape of the Earth in the area of the survey. The actual measurements made on the surface of the Earth with certain instruments are however referred to the geoid. The ellipsoid is a mathematically defined regular surface with specific dimensions. The geoid, on the other hand, coincides with that surface to which the oceans would conform over the entire Earth if free to adjust to the combined effect of the Earth's mass attraction (gravitation) and the centrifugal force of the Earth's rotation. As a result of the uneven distribution of the Earth's mass, the geoidal surface is irregular and, since the ellipsoid is a regular surface, the separations between the two, referred to as geoid undulations, geoid heights, or geoid separations, will be irregular as well.
The geoid is a surface along which the gravity potential is everywhere equal and to which the direction of gravity is always perpendicular (see equipotential surface). The latter is particularly important because optical instruments containing gravityreference leveling devices are commonly used to make geodetic measurements. When properly adjusted, the vertical axis of the instrument coincides with the direction of gravity and is, therefore, perpendicular to the geoid. The angle between the plumb line which is perpendicular to the geoid (sometimes called "the vertical") and the perpendicular to the ellipsoid (sometimes called "the ellipsoidal normal") is defined as the deflection of the vertical. It has two components: an eastwest and a northsouth component.
Earth rotation and Earth's interior
Determining the exact figure of the Earth is not only a geodetic operation or a task of geometry, but is also related to geophysics. Without any idea of the Earth's interior, we can state a "constant density" of 5.515 g/cm³ and, according to theoretical arguments (see Leonhard Euler, Albert Wangerin, etc.), such a body rotating like the Earth would have a flattening of 1:230.
In fact the measured flattening is 1:298.25, which is more similar to a sphere and a strong argument that the Earth's core is very compact. Therefore the density must be a function of the depth, reaching from about 2.7 g/cm³ at the surface (rock density of granite, limestone etc. – see regional geology) up to approximately 15 within the inner core. Modern seismology yields a value of 16 g/cm³ at the center of the earth.
Global and regional gravity field
Also with implications for the physical exploration of the Earth's interior is the gravitational field, which can be measured very accurately at the surface and remotely by satellites. True vertical generally does not correspond to theoretical vertical (deflection ranges from 2" to 50") because topography and all geological masses disturb the gravitational field. Therefore the gross structure of the earth's crust and mantle can be determined by geodeticgeophysical models of the subsurface.
Volume
Earth's volume is approximately 1,083,210,000,000 km^{3}^{[5]}
See also
 Clairaut's theorem
 Geosciences, WGS84, EGM96
 Earth radius, flattening, meridian arc
 reference ellipsoid, geoid undulations
 theoretical gravity, gravity formula
 History: Flat Earth, Eratosthenes, Pierre Bouguer, Friedrich Robert Helmert
Notes and references
 ^ Cloud, John. "Crossing the Olentangy River: The Figure of the Earth and the MilitaryIndustrialAcademic Complex, 1947–1972," Studies in the History and Philosophy of Modern Physics, Vol. 31, No. 3, pp 371–404, 2000.
 ^ NIMA Technical Report TR8350.2, "Department of Defense World Geodetic System 1984, Its Definition and Relationships With Local Geodetic Systems", Third Edition, 4 July 1997 [1]
 ^ ^{a} ^{b} Note that the current best estimates, given by the IERS Conventions, "should not be mistaken for conventional values, such as those of the Geodetic Reference System GRS80 ... which are, for example, used to express geographic coordinates" (chap. 1); note further that "ITRF solutions are specified by Cartesian equatorial coordinates X, Y and Z. If needed, they can be transformed to geographical coordinates (λ, φ, h) referred to an ellipsoid. In this case the GRS80 ellipsoid is recommended." (chap. 4).
 ^ IERS Conventions (2003) (Chp. 1, page 12)
 ^ Williams, David R. (20040901). "Earth Fact Sheet". NASA. http://nssdc.gsfc.nasa.gov/planetary/factsheet/earthfact.html. Retrieved 20070317.
 Guy Bomford, Geodesy, Oxford 1962 and 1880.
 Guy Bomford, Determination of the European geoid by means of vertical deflections. Rpt of Comm. 14, IUGG 10th Gen. Ass., Rome 1954.
 Karl Ledersteger and Gottfried Gerstbach, Die horizontale Isostasie / Das isostatische Geoid 31. Ordnung. Geowissenschaftliche Mitteilungen Band 5, TU Wien 1975.
 Helmut Moritz and Bernhard Hofmann, Physical Geodesy. Springer, Wien & New York 2005.
External links
 Reference Ellipsoids (PCI Geomatics)
 Reference Ellipsoids (ScanEx)
 Changes in earth shape due to climate changes
 Jos Leys "The shape of Planet Earth"
Categories:
Wikimedia Foundation. 2010.
Look at other dictionaries:
figure of the earth — the precise geometric shape of the planet compare geoid … Useful english dictionary
The Day the Earth Stood Still — Le Jour où la Terre s arrêta . Cet article concerne le film de 1951. Pour son remake de 2008, voir Le Jour où la Terre s arrêta (film, 2008). Le Jour où la Terre s arrêta … Wikipédia en Français
History of the Earth — For the history of modern humans, see History of the world. Geological time put in a diagram called a geological clock, showing the relative lengths of the eons of the Earth s history The history of the Earth describes the most important events… … Wikipedia
Defenders of the Earth — File:Defenders 1.jpg Defenders of the Earth title screen Genre Action/Adventure Science fantasy Format Children s Animated series Written by Lee Fal … Wikipedia
Staroftheearth — Star Star (st[aum]r), n. [OE. sterre, AS. steorra; akin to OFries. stera, OS. sterro, D. ster, OHG. sterno, sterro, G. stern, Icel. stjarna, Sw. stjerna, Dan. stierne, Goth. sta[ i]rn[=o], Armor. & Corn. steren, L. stella, Gr. asth r, a stron,… … The Collaborative International Dictionary of English
Journey to the Center of the Earth — infobox Book  name = A Journey to the Centre of the Earth title orig = Voyage au centre de la Terre translator = image caption = Book cover of the 1874 edition author = Jules Verne cover artist = country = France language = French series = The… … Wikipedia
Journey to the Center of the Earth (2008 film) — Infobox Film name = Journey to the Center of the Earth caption = Promotional poster director = Eric Brevig producer = Brendan Fraser (executive) writer = Jules Verne Michael Weiss Mark Levin starring = Brendan Fraser Josh Hutcherson Anita Briem… … Wikipedia
Gort (The Day the Earth Stood Still) — Gort is a fictional humanoid robot in the 1951 movie The Day the Earth Stood Still . The giant metal robot accompanies Klaatu, a visitor to Earth from a distant planet, aboard a flying saucer. He does not speak, but uses a beam weapon projected… … Wikipedia
Figure De La Terre — La détermination de la figure de la Terre, autrement dit l étude de la forme de la surface externe du globe terrestre et de ses dimensions, constitue l une des tâches classiques de la géodésie. Elle fournit des informations essentielles pour la… … Wikipédia en Français
Earth ellipsoid — The Earth ellipsoid especially the mean Earth ellipsoid is the mathematical figure of the Earth which is used as a reference frame for computations in geodesy, astronomy and the geosciences.It is a ellipsoid of rotation, whose short (polar) axis… … Wikipedia
© Academic, 20002020Share the article and excerpts
We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.
Figure of the Earth

Geodesy Fundamentals Geodesy · Geodynamics
Geomatics · CartographyConcepts Datum · Distance · Geoid
Figure of the Earth
Geodetic system
Geog. coord. system
Hor. pos. representation
Map projection
Reference ellipsoid
Satellite geodesy
Spatial reference systemTechnologies GNSS · GPS · ... Standards ED50 · ETRS89 · NAD83
NAVD88 · SAD69 · SRID
UTM · WGS84 · ...History History of geodesy
NAVD29 · ...