United States hand grenades

The military of the United States has used dozens of different types of hand grenades since its foundation. Presented on this page is a basic overview.

High Explosive; Fragmentation and Blast

Mk II and Mk IIA1

More commonly known as the "Pineapple" the Mk II series (also written Mk 2) was the most common US fragmentation grenade of the Second World War. The Mk II body featured a serrated exterior designed to aid grip in poor condition. A common misconception is that the grooves aid fragmentation of the grenade; studies have disproved this. The filling is either TNT (approx 2 ounces), or EC blank fire powder (approx ¾ of an ounce smokeless small arms powder). ["Inert-Ord.net". [http://www.inert-ord.net/usa03a/usa2/index.html American Mk.II Hand Grenade] , 2 April 2006.Access date: 18 April 2007.] Vilinsky, Alan. "WWII US Army Reenactment Association", [http://users.skynet.be/jeeper/page63.html Hand Grenades] , 19 August 2006. Access date: 18 April 2007.]

The Mk II was also available in a little-known HE-Blast (better known as "concussion") variant and a combined effect HE-Frag variant. This was largely superseded by the Mk III series. The Mk IIA1 (also written Mk 2A1) used the M10A2 or M10A3 fuzes, upgrades to the previous M10A1 fuze used in the Mk II. [Hogg 2001, p. 327.] Later reissued Mk II variants featured the modern M204 series fuze. [Gervasi 1984, p. 305.]

Mk III, Mk IIIA1, and Mk IIIA2

Unlike the Mk II, the Mk III (also written Mk 3) was a cylindrical grenade designed to be used as an "offensive" weapon for clearing rooms, trenches, and other enclosed spaces. A concussion grenade, the Mk III series was designed to incapacitate through the pressure and impulse produced by the explosive fillings detonation. The MkIII had a far larger TNT filling than the Mk II series; up to 8 ounces of TNT, in comparison to 1.8 ounces. Although a minimum fragmentation grenade, large fragments (most likely the fuze assembly, or surrounding material) could be projected as far as 200 m from the detonation point. The differences between the Mk III, the Mk IIIA1 (also written Mk 3A1) and the Mk IIIA2 (also written Mk 3A2) was the continual improvement of the M6 fuze. The Mk III featured the M6/A1, the Mk IIIA1 the M6A2, and the Mk IIIA2, the M6A3. [Hogg 2001, p. 327.] Later reissued Mk III variants featured the modern M206 series fuze. [Gervasi 1984, p. 305.]

M26/A1/A2, M57 and M61

The M26 series is in many ways an upgrade in basic principle of the Mk II. A similarly shaped, but not visibly ribbed fragmentation grenade. The M26 has a filling of Composition B contained within a sheet steel two part outer shell which covers a prenotched fragmentation coil inner liner. The use of the inner liner creates a highly predictable fragment pattern and causality radius. The grenade was found to have problems with complete detonation of the filler, and the M26A1 featured a tetryl booster to ensure complete detonation. [Dockery 1997, p. 173.] The M61 was the product of a further Product Improvement Project or PIP, and is identical to the M26A1 with the exception of the additional safety clip for the spoon of the grenade on the M61. [Dockery 1997, p. 173.] The M26A2 is identical to the M26A1 except for being fitted with the M217 impact fuze. ["ORDATA Online". [http://ordatamines.maic.jmu.edu/displaydata.aspx?OrDataId=886 U.S. GRENADE, HAND, FRAG, M26A2 & M57] . Access date: 18 April 2007.] The M57 is the equivalent of the M61 for the M26A1, and is the same as the M26A2 with the exception of the additional safety clip on the spoon of the grenade. [Gervasi 1984, p. 304.]

M33, M33A1/M59, M67, and M68

Similar in format to the M26, the M33 is a spherical fragmentation grenade also filled with Composition B explosive. Unlike the M26, the inner wall is prescored and does not contain a fragmentation coil. [Dockery 1997, p. 175.] The grenade's exterior has smooth appearance, compared to the Mk II series pineapple appearance. The M67 was part of a similar PIP, and is identical to the M33 with the exception of the additional safety clip for the spoon of the grenade on the M67. [Dockery 1997, p. 175.] Early M33 grenades were also more of an oval shape before transitioning over to the more spherical shape of the M67. The M67 is the current issue HE-Frag grenade for the US military. The M33A1 is the impact version of the M33, using the M217 electrical impact fuze in place of the normal delay fuze. At an unknown point the M33A1 was redesignated as the M59. ["ORDATA Online". [http://ordatamines.maic.jmu.edu/displaydata.aspx?OrDataId=893 U.S. GRENADE, HAND, FRAG, M59 & M68] . Access date: 18 April 2007.] There should be no difference between these grenades with the possible exception of the M33A1 being more ovular in shape, while the M59 might appear more spherical. The M68 is the same as the M59, with the exception of the additional safety clip. [ Gervasi 1984, 305.]

Mk 40 Mod 0/1

The Mk 40 is a TNT filled concussion grenade specifically for use against enemy divers and frogmen. The grenade is designed to be employed essentially as an anti-personnel depth charge, killing or otherwise incapacitating the target by creating a lethal shockwave underwater, similar to that of a full-size depth charge. [Dockery 1997, p. 188.]

moke and Signaling Grenades

M1 "Frangible" FS

The United States standardized a common pint bottle "Molotov Cocktail" style "grenade" in 1942. It had a number of fillers, including a sulphur trioxide chlorsulfonic acid mixture, also known as FS, a corrosive chemical mix that created a heavy smoke when exposed to air. This grenade required no fuze. The main purpose was anti-vehicle; the grenade would be smashed on a tank's air intake, filling the crew compartment with smoke.Vilinsky, Alan. "WWII US Army Reenactment Association", [http://users.skynet.be/jeeper/page66.html Grenades] [incendiary] , 19 August 2006. Access date: 18 April 2007.]

M8, M83 and Model 308-1 White Smoke

A smoke grenade similar visually to the Mk III HE-Blast grenade, the M8 (also written AN/M8) is filled with hexachloroethane or HC for short, a chemical agent that produces a thick white smoke when burned. The M8 is used for signaling and screening purposes, and since it works by burning the HC for its effect, it can also be used as an improvised incendiary device. [Dockery 1997, p. 179.] HC smoke is toxic and can cause more serious health problems with prolonged exposure. The M83 (also written AN/M83) is a modernized version of the M8, using TA instead of HC as the filler mixture.Cooke, Gary W. "Gary's Olive Drab Page", [http://www.inetres.com/gp/military/infantry/grenade/hand.html Hand Grenades] . Access date: 18 April 2007.] The Model 308-1 White Smoke was a modified version of the M8 produced at the Special Operations Branch of the Naval Weapons Center at China Lake California, often simply referred to as China Lake. The Model 308-1 was modified for a US Navy SEAL requirement with a greater burning rate, meaning a greater smoke output but a shorter overall burning time. [Dockery 1997, p. 185.]

M15, M16, and M34

The M15 is a white phosphorus smoke grenade, nicknamed Willie Peter or Willie Pete (White Phosphorus), used for screening and signaling purposes. It is cylindrical, but with rounded edges compared to the those of the M8. [Dockery 1997, p. 177.] ["ORDATA Online". [http://ordatamines.maic.jmu.edu/displaydata.aspx?OrDataId=3020 U.S. GRENADE, SMOKE, WP, M15 AND FUZES, M6A3, M10A3, & M200A1] . Access date: 18 April 2007.] WP has many of the same properties of HC, and is also burned to create the effect, giving the M15 a similar incendiary capability. The M16 was a version of the grenade, featuring a number of colors. The M16 was originally available in: blue, green, orange, red, violet, yellow, black and blue. This was later reduced only to the following four colors: red, yellow, green, violet. The M34 was a variant of the M15 designed to be able to be used as a rifle grenade using the M2 series of grenade launching adapters, and was ribbed to give the fins better grip on the grenade body. [Dockery 1997, p. 179.]


=M18=

A purpose designed "smoke flare," the M18 was a smoke grenade visually similar to the M8, but with a different type of filler and internal construction. The M18 was made available in four colors: yellow, green, red, violet, and used extensively in the Vietnam conflict and since. [Dockery 1997, p. 179.] A nonsubmersible variant of the M18 was also made, with a floatation bladder to prevent it from sinking for use in marking at sea. ["ORDATA Online". [http://ordatamines.maic.jmu.edu/displaydata.aspx?OrDataId=3100 U.S. GRENADE, HAND, SMOKE, NONSUBMERSIBLE] . Access date: 18 April 2007.]

XM48/E1/E2/E3

A variant of the XM47 series, which is in the following section, the XM48 is a "skittering" type smoke grenade. What this means is the filler is burned internally and vented through ports in the grenade body, in effect making the grenade spin erratically. The XM48 series burns an unknown filler for a red colored smoke, probably WP or HC based, and is not known to be standardized. ["ORDATA Online". [http://ordatamines.maic.jmu.edu/displaydata.aspx?OrDataId=6238 U.S. GRENADE, HAND, RED SMOKE, M48E1 (OBSOLETE), & M48E3] . Access date: 18 April 2007.]

Mk 1 Mod 0/1/2/3

An illumination grenade, with a magnesium filler ignited by a wick type fuze, the Mk 1 Mod 0 was first produced during the Second World War. While not conclusively so, it might be safe to assume that the Mod 1 featured an improved type fuze moving away from the simple wick lighter design. The Mod 2 featured a simplified overall design, while the Mod 3 outright replaced the single piece steel body with a two piece plastic shell. [Dockery 1997, p. 187.] ["Inert-Ord.net". [http://www.inert-ord.net/usa03a/usa3/mk1illum/index.html U.S. Mk.I Illumination Grenade (WWII)] , 2 April 2006. Access date: 18 April 2007.]

EX 1 Mod 0 and EX 2 Mod 0

Developed as a joint project between the US Navy and the DuPont Chemical company, the EX 1 and EX 2 were part of the Target Illumination and Recovery Aid (or TIARA) program. DuPont created a number of essentially glow-in-the-dark fillers, finally settling on the non-toxic PB-155 compound. PB-155 (also known as TIARA 5) glows when it oxidizes and therefore could be used to mark things at night with minimal fuss. Developed specifically for the US Navy SEALs, the first production models were created in 1963. The EX 1 Mod 0 was a hand grenade, based on the M25A2 chemical grenade described in the following section. Testing in 1963 showed that the TIARA 5 mixture had averse effects on the functioning of the C12 fuze integral to the M25A2 design. This led to the replacement of the fuze's integral primer, the M39A1, with a model that was resistant to the filler mixture, the M5. [Allen, 1963. p. 5–6.] The EX 2 Mod 0, visibly more similar to other cylindrical smoke and chemical grenades (such as the AN/M8 and M18 discussed in this section) was designed to be used as a rifle grenade using the M2 series of grenade launcher adapters. [Dockery 1997, p. 185–6.]

The US Army also tested a plastic chemiluminescent grenade in 1966, utilizing the PB-155 filler and the M217 impact fuze, with negative results about the mixture's usefulness for the intended role, with the brightness and duration of functioning being "insufficient." [United States, 1966. p. 2–3.]

Chemical Grenades

M1 "Frangible" CNS and AC

The M1 grenade could be filled with a plethora of chemical compounds including both lethal and less than lethal combinations for desired effect. The M1 could be filled with either CNS, a mixture of CN in Chlorpicrin and Chloroform called a Chloracetophenone solution (which functions very much like regular CN), or AC, Hydrocyanic Acid, a powerful blood agent. Both of these compounds react with air for the desired effect and require no fuze.

M6/A1, M7/A1/A2/A3 and M54

The M6/M7 series were cylindrical riot control grenades, with a variety of fillers, including CN, CS, and DM. DM is a substance that causes a burning sensation in nose and throat and a heavy tight feeling in the chest, accompanied by a nauseating effect. All of these weapons are bursting type grenades that work by burning the filler. The M6/A1 is filled with CN-DM, [Dockery 1997, p. 181–2.] the M7/A1 with CN, [Dockery 1997, p. 181.] Vilinsky, Alan. "WWII US Army Reenactment Association", [http://users.skynet.be/jeeper/page64.html Grenades] [gas/smoke] , 19 August 2006. Access date: 18 April 2007.] the M7A2 (also written ABC-M7A2) with CS, [Dockery 1997, p. 183.] and the M7A3 (also written ABC-M7A3) with the CS in pelletized rather than gelatin capsule form. The M7A2 and M7A3 have 3 emission holes on top and one on the bottom, the M6 and M7 have 6 emission holes on top and 1 on the bottom, and the M6A1 and M7A1 have 4 emission holes on the top and one on the bottom."ORDATA Online". [http://ordatamines.maic.jmu.edu/displaydata.aspx?OrDataId=5684 U.S. GRENADE, HAND/RIFLE, M7A1, ABC-M7A2, M7A3, & M54 (CS) (OBSOLETE)] . Access date: 18 April 2007.] The M54 is a variant of the M7 series designed to be dropped for aerial launchers.

M25/A1/A2

A spherical riot control grenade, the M25/A1 (also written ABC-M25/A1) is filled with CN. [Gervasi 1984, p. 305.] The grenade is of plastic construction and is a bursting type. ["ORDATA Online". [http://ordatamines.maic.jmu.edu/displaydata.aspx?OrDataId=5686 U.S. GRENADE, HAND, CN, ABC-M25A1] . Access date: 18 April 2007.] The M25A2 featured improved body construction, and later models were filled with CS (and possibly DM) rather than CN. ["ORDATA Online". [http://ordatamines.maic.jmu.edu/displaydata.aspx?OrDataId=6206 U.S. GRENADE, HAND, RIOT CONTROL, ABC-M25A2 (CN-1)] . Access date: 18 April 2007.] ["ORDATA Online". [http://ordatamines.maic.jmu.edu/displaydata.aspx?OrDataId=5688 U.S. GRENADE, HAND, CS 1, ABC-M25A2 (CS1 OR DM1)] . Access date: 18 April 2007.]

XM47/E1/E2/E3

A rubber ball riot control grenade, the XM47 series are what could be called "skittering grenades" as the gas is burned internally and vented through ports in the grenade body, in effect making the grenade spin erratically. ["ORDATA Online". [http://ordatamines.maic.jmu.edu/displaydata.aspx?OrDataId=5644 U.S. GRENADE, HAND, (RIOT CONTROL CS), M47E1 (OBSOLETE), & M47E3] . Access date: 18 April 2007.] This is designed to make it harder for the target or targets to retrieve and throw back the grenade. The XM47E3 is filled with CS, but information on the other variants is scarce. It is probably safe to assume that at least one is filled with CN, and then others might have the filler in different solid forms. The XM47E3 was the standardized as the M47.

XM58

A small cylindrical "pocket" grenade, the XM58 is a riot control weapon filled with CS. ["ORDATA Online". [http://ordatamines.maic.jmu.edu/displaydata.aspx?OrDataId=5689 U.S. GRENADE, HAND, POCKET, XM58 (CS) (OBSOLETE)] . Access date: 18 April 2007.]

Incendiary Grenades

M1 "Frangible" AW, GA, IM, NP, and Alcohol-Gasoline

The most common types of fillers for the M1 were not surprisingly a number of incendiary agents. The various fillers changed as the chemical technology improved, and created a number of more standardized "Molotov Cocktails." AW is phosphorus mixed with a rubber-gasoline solution that allows the compound to stick better to surfaces while burning. GA is either liquid or solidified ("jellied") gasoline. IM is a thickened incendiary mixture, and NP is a Napalm filler. Alcohol-Gasoline is self-explanatory. The AW used no fuze, but the Alcohol-Gasoline mixture used the M1 igniter, the GA used the M2 igniter, and the IM and NP both used the M3 igniter.

M14

A cylindrical grenade visually identical to the M8, the M14 (also written AN/M14) is a purpose designed incendiary grenade. Working off the intense and violent reaction of the thermite filler, end result of the detonation of the M14 is molten iron. This means the M14 is primarily employed on material to be destroyed in a roughly secure environment and not as an offensive or defensive weapon. The grenade has the ability to melt right through an engine block. Also, since the thermite reaction uses iron oxide instead of oxygen for its oxidizing agent, the grenade can work under water. [Dockery 1997, p. 183–4.]

Model 308-1 Napalm

Another variant of the Model 308-1 designed by the Special Operations Branch of the Naval Weapons Center at China Lake California, the 308-1 Napalm was in direct response to SEAL requirements for a more offensive incendiary device over the M14. Issued as a kit, the user would take the included powdered Napalm ("M1 Thickener") and then fill the grenade with gasoline to produce a complete incendiary device. [Dockery 1997, p. 185.]

tun Grenades

M116/A1 and the "Flash-Crash"

The M116/A1 is not technically a stun grenade, but is in fact a hand grenade "simulator," designed to create a sort of realistic grenade-like effect for exercises. The M116 series is usually fitted with a pull string igniter and fuze assembly. ["Big-ordnance". [http://www.big-ordnance.com/grenades/grenades5.htm Grenades 5] , 6 June 2004. Access date: 18 April 2007.] An improvised stun grenade was however created from the M116 series by US Navy SEALs, by replacing this fuze with an M201 series igniting fuze. This new weapon was nicknamed the "Flash-Crash". There are certain dangers from using the M116-based Flash-Crash however, mainly the metal body, which has the potential to create harmful shrapnel when employing the device in hostage rescue situations. [Dockery 1997, p. 188.]

XM84/M84

A diversionary stun grenade developed by the US Army, the M84 is part of a number of less-than-lethal and generally less harmful crowd control and disorientation weapons currently under development by the US military for use in riot control, hostage rescue, and similar situations where such a device might be called upon. The M84, like most stun grenades, creates a large bang coupled with a blinding flash (leading the common name for such grenades, "Flash-Bang"), and is readily identifiable by its two hexagonal end-caps on a perforated tube. A small charge is detonated in the center of this tube for the desired effect.

Mk 141 Mod 0

A diversionary stun grenade developed by the US Navy, the Mk 141 is a product of the same thinking that gave rise to the M84 and is designed to be used in similar situations. Looking much more like a conventional grenade, the Mk 141 is constructed of a lightweight solid foam. ["ORDATA Online". [http://ordatamines.maic.jmu.edu/displaydata.aspx?OrDataId=895 U.S. CHARGE, DIVERSIONARY, MK 141 MOD 0] . Access date: 18 April 2007.]

Training Grenades

The following is a table of training grenades, and what grenades they are designed to mimic

Common Fuzes

The following table is of common grenade fuzes [Vilinsky, Alan. "WWII US Army Reenactment Association", [http://users.skynet.be/jeeper/page65.html Grenades] [smoke] , 19 August 2006. Access date: 18 April 2007.]

ee also

* List of individual weapons of the U.S. Armed Forces
* List of vehicles of the U.S. Armed Forces

Citations

References

* Allen, Edward A. "Technical Progress Report: C12 Detonator Malfunctions in EX 1 Mod 0 Illuminating Hand Grenade." China Lake, Calif.: Naval Ordnance Test Station, 1963.
* Dockery, Kevin. "Special Warfare Special Weapons". Chicago: Emperor's Press, 1997. ISBN 1-883-47600-3.
* Gervasi, Tom. "Arsenal of Democracy III: America's War Machine." New York: Grove Press, 1984. ISBN 0-394-54102-2
* Hogg, Ian V. "The American Arsenal". Mechanicsburg, Penn.: Stackpole Books, 2001. 1-85367-470-2.
* United States Government. United States Army, Army Concept Team in Vietnam. "Final Report of Chemiluminescent Hand Grenade." Army Concept Team in Vietnam, 1966.

External links

* [http://users.skynet.be/jeeper/page63.html US Army Reenactment Association Hand Grenade Page]
* [http://www.fas.org/man/dod-101/sys/land/grenade.htm Hand Grenades] , FAS.org
* [http://www.inetres.com/gp/military/infantry/grenade/hand.html Gary's Green Olive Grenade Page]
* [http://www.inert-ord.net/usa03a/index.html American Grenades & Ordnance] , Inert-Ord.net
* [http://www.globalsecurity.org/military/systems/munitions/grenade.htm Hand Grenades] , Global Security.org
* [http://www.olive-drab.com/od_infweapons_hand_grenades.php Hand Grenades] , Olive-Drab


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • United States Army Basic Training — (also known as Initial Entry Training or IET)[1] is the program of physical and mental training required in order for an individual to become a soldier in the United States Army, United States Army Reserve, or Army National Guard. It is carried… …   Wikipedia

  • United States 40 mm grenades — The United States Army has created a plethora of different types of 40 mm grenades in both the low velocity 40x46 mm and high velocity 40x53 mm calibers. Presented on this page is a basic overview.High Explosive Cartridgestandard High Explosive… …   Wikipedia

  • United States Marine Corps School of Infantry — The School of Infantry (SOI) is the second stage of initial military training for enlisted United States Marines after Recruit Training. Since the initial training pipeline is divided between coasts, Marines from areas east of the Mississippi… …   Wikipedia

  • United States Naval Special Warfare Development Group — Naval Special Warfare Development Group …   Wikipedia

  • United States Army — Department of the Army United States Army Department of the Army Emblem Act …   Wikipedia

  • 502nd Infantry Regiment (United States) — Infobox Military Unit unit name=502nd Parachute Infantry Regiment caption=502nd Infantry coat Of arms nickname= Five Oh Deuce or The Deuce motto= Strike colors= march= ceremonial chief= type=Parachute Infantry branch=Army dates=1942–1945;… …   Wikipedia

  • 8th Cavalry Regiment (United States) — Infobox Military Unit unit name=8th Cavalry Regiment caption=8th Cavalry Regiment coat of arms nickname= motto=Honor and Courage colors=Yellow march= ceremonial chief= type=Cavalry branch=Regular Army dates=September 21, 1866 country=United… …   Wikipedia

  • 3d Armored Cavalry Regiment (United States) — 3d Armored Cavalry Regiment 3d Armored Cavalry Regiment coat of arms Active 1846–present Country U …   Wikipedia

  • 442nd Infantry Regiment (United States) — 442nd Regimental Combat Team 442nd Infantry Regiment Coat of Arms Active August 1944–August 1946 July 1947–December 1969 …   Wikipedia

  • Terrorism in the United States — A common definition of terrorism is the systematic use or threatened use of violence to intimidate a population or government and thereby effect political, religious, or ideological change.cite web|url= http://www.britannica.com/eb/article… …   Wikipedia


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.